Then Uwe reply 11 minutes later with the same offer - same rig at 5:39pm; First reply - First chosen basis.
Let’s me know. Benjamin L / F4FPR / K5AW Le 21 janv. 2021 à 13:36, Bensay 1 <bensam...@hotmail.com> a écrit : Hi Bill, I just check back my outbox to be sure about this but yesterday at 5:28pm I offered to be part of the test for the only yaesu rig I own and wasn’t yet offered to test the Yaesu FT-991. Let’s me know about it. 73s Benjamin L / F4FPR / K5AW Le 21 janv. 2021 à 13:07, Bill Somerville <g4...@classdesign.com> a écrit : Hi Benjamin, you responded with an offer to test two rigs, I chose the one that no one else had offered at that time. I am trying to spread the work across as many responders as possible without duplication. 73 Bill G4WJS. On 21/01/2021 11:44, Bensay 1 wrote: Dear Bill, Wasn’t I the first one responder for FT-991 ? 73s Benjamin L / F4FPR / K5AW Le 21 janv. 2021 à 11:55, Bill Somerville <g4...@classdesign.com><mailto:g4...@classdesign.com> a écrit : Hi Uwe, thanks for the update. I need quite specific test run and also to see the diagnostic trace. I will send out a test plan once some issues for another rig have been resolved. 73 Bill G4WJS. On 21/01/2021 10:46, DG2YCB, Uwe wrote: Hi Bill and Mike, For your information: I have just compiled wsjt-x v2.3.0-rc3 with a freshly created hamlib (Build Date: 21-01-2021 at 11:16, source files from hamlib master repository). Result: My Yaesu FT-991 seems to work without any problems. Frequency changes and TX / RX work perfectly in both directions. I did not find any undesirable effects. 73 de Uwe, DG2YCB -----Ursprüngliche Nachricht----- Von: Bill Somerville [mailto:g4...@classdesign.com] Gesendet: Mittwoch, 20. Januar 2021 17:47 An: wsjt-devel@lists.sourceforge.net<mailto:wsjt-devel@lists.sourceforge.net> Betreff: Re: [wsjt-devel] Request to Yaesu rig owners On 20/01/2021 15:30, Bill Somerville wrote: Hi All, apologies for the cross-posting. Due to some recent Hamlib updates to resolve long standing issues with band changing on modern Yaesu rigs it has become necessary to do some urgent tests to verify correct behaviour. This concerns the following rigs and their variants: FT-450 FT-891 FT-950 FT-991 FT-2000 FTdx1200 FTdx3000 FTdx5000 FTdx9000 FTdx101 FTdx10 I am looking for owners of one of these rigs who are willing to run a short test to gather diagnostics to verify correct Hamlib behaviour. It will require downloading and installing a test version of WSJT-X and running a short test plan, then sending back a log file. It should only take about 30 minutes to complete. If the test passes that will be all, if there are failures there will be an opportunity to help with further tests to help with fixing any defects found. The urgency is because I want to complete this exercise on as many of the above rig models before the imminent General Availability (GA) release of WSJT-X v2.3.0. Without this verification we will not be able to ship with the latest Hamlib library code, which means many recent defect repairs and support for new rigs will not be available. I currently have access to to an FT-2000 so that one is already dealt with. Thanks in advance. 73 Bill G4WJS. Hi all, thanks to those who have kindly responded so far. I will initially chose one of you for each rig model to do the tests, on a first replied - first chosen basis, so apologies to those who don't get chosen, your offer is still much appreciated. We have quite good coverage so far but no responses yet from owners of the following models: FT-950 FTdx9000 FTdx10 73 Bill G4WJS. _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
