I am available at 920-371-5149 Sent from my iPhone
> On Jan 29, 2021, at 3:15 PM, Bill Somerville <g4...@classdesign.com> wrote: > > >> On 29/01/2021 19:21, Tim Selner wrote: >> Hamlib error in RC4 >> >> >> >> I installed WSJT-X RC4 and I am having issues. I am running Windows 10 and >> an IC-735. Everything was working fine on RC3 but now I am have problems >> transmitting using RC4. Freq control looks to be OK but I am not getting >> consistent PTT. When I go to Settings / Radio I can test the CAT box and it >> turns green. When I test PTT I am getting this error: >> >> >> >> Rig Failure Hamlib error: Command rejected by the rig while getting current >> VFO mode. >> >> >> >> If I go to “Tune” on the main screen I am often able to transmit for several >> seconds until It drops out of transmit and I get the following error: >> >> >> >> Hamlib error: Command rejected by the rig while getting current VFO mode >> >> >> >> Timestamp: 2021-01-28T23:36:49.330Z >> >> >> >> Please call of email me if there is anything I can do, and thanks for your >> hard work!! >> >> Tim Selner >> >> W9SRW >> >> tsel...@new.rr.com >> >> >> > Hi Tim, > > so I can see what is happening, please put the attached file into your WSJT-X > configuration files directory (the same as the log files directory on Windows > - "Menu->File->Open log directory") then restart WSJT-X and reproduce the > issue in the shortest time possible (keeps the log file small), quit WSJTX, > then send me the file WSJT-X_RigControl.log that will have been created on > your Desktop. Send the file direct to g4wjs <at> classdesign <dot> com. > > 73 > Bill > G4WJS. > > <wsjtx_log_config.ini> > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
