Rename that .ini file back, recreate the problem and send me the log file.Be
sure to delete the log file on your desktop before starting WSJT-X again.
Mike W9MDB
On Friday, January 29, 2021, 09:05:28 PM CST, Tim Selner
<[email protected]> wrote:
Mike, I had more Hamlib errors in different parts of doing a QSO. Much better
now but there must be other code hiding from view.
Thanks
Sent from Mail for Windows 10
From: Tim Selner
Sent: Friday, January 29, 2021 6:15 PM
To: Black Michael; WSJT software development
Subject: Re: [wsjt-devel] Hamlib error in RC4
Mike, operation is better but still there are some issues. I did get one Rig
Control Error but the most problematic area is the radio changes frequency in
the middle of a QSO. That happened in the middle of a 30 second T/R QSO. I
will monitor the problems and let you know fi they persist. Rebooting the PC
now to make sure that is not the issue.
Sent from Mail for Windows 10
From: Black Michael via wsjt-devel
Sent: Friday, January 29, 2021 5:09 PM
To: [email protected]
Cc: Black Michael
Subject: Re: [wsjt-devel] Hamlib error in RC4
This has been fixe in hamlib now.
Any Icom with a 1-byte mode value would see this error.
Mike W9MDB
On Friday, January 29, 2021, 01:39:50 PM CST, Tim Selner <[email protected]>
wrote:
Hamlib error in RC4
I installed WSJT-X RC4 and I am having issues. I am running Windows 10 and an
IC-735. Everything was working fine on RC3 but now I am have problems
transmitting using RC4. Freq control looks to be OK but I am not getting
consistent PTT. When I go to Settings / Radio I can test the CAT box and it
turns green. When I test PTT I am getting this error:
Rig Failure Hamlib error: Command rejected by the rig while getting current VFO
mode.
If I go to “Tune” on the main screen I am often able to transmit for several
seconds until It drops out of transmit and I get the following error:
Hamlib error: Command rejected by the rig while getting current VFO mode
Timestamp: 2021-01-28T23:36:49.330Z
Please call of email me if there is anything I can do, and thanks for your hard
work!!
Tim Selner
W9SRW
[email protected]
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
