Will it be the VID or PID data?
Alan G0TLK, sent from my mobile device
On 22 June 2021 18:14:52 William Smith <w_sm...@compusmiths.com> wrote:
In my WSJT-X.ini file, I've got:
SoundInName=IC-7100_Rx (3- USB Audio CODEC )
SoundOutName=IC-7100_TX (3- USB Audio CODEC )
I can't see anything changing with that device in Device Manager when it
stops working, so there's something else going on.
Obviously there's a mapping from the text names above to some numeric
identifier, and that's the thing that changes whenever something disturbs
Windows.
Durned if I can figure out what it is or if there's an easy way for WSJT to
figure out that it's changed.
73, Willie N1JBJ
On Jun 22, 2021, at 9:31 AM, Black Michael via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
Seems like this should be fixable if the devices were enumerated just
before opening the rig.
Or put a "Refresh" button on the error dialog but the auto-enumeration
would be better for any auto recovery.
Mike W9MDB
On Tuesday, June 22, 2021, 05:47:09 AM CDT, <al...@alangroups.plus.com> wrote:
Could the code response to be that be if a USB identity cannot be found on
a call to it then either a USB enumeration is done or if that's not
possible (I don't know if that can be done from app code) then an error
gets thrown?
Just a thought so this kind of situation is handled gracefully?
Alan G0TLK
On 22/06/2021 10:26, runninge...@gmail.com wrote:
Hi,
This is an observation, not necessary a bug report, and as Bill pointed out
in one of the groups.io threads :
The root problem is that USB devices are "hot-pluggable" and adding or
removing a device, while the system is running, will cause all other devices
to be re-enumerated, this can change device identities but Windows does not
inform applications using them that they have been shuffled.
73's Erik.
ON4PB
-----Original Message-----
From:
runninge...@gmail.com <runninge...@gmail.com>
Sent: Tuesday, 22 June 2021 10:37
To:
wsjt-devel@lists.sourceforge.net
Subject: Re : Transmit audio dropouts
Hi,
I think I have a simple recipe to reproduce this problem :
I have 4 WSTX instances connected to 4 slices on my Flex 6600M. All is
working fine.
My USB headset is connected to a USB port.
=> Disconnect the headset and after that, PTT will work but no transmit
audio. Reconnecting the headset does not cure the problem, restarting WSJTX
however does.
Now, there are a couple of variants to reproduce the audio dropout :
- reconnecting the headset with working WSJTX instances
- doing the same on 4 WSJTX instances connected to SparkSDR. So, the Flex is
not at fault.
And lastly, sometimes it occurs that all 4 decode buttons remain active
blue.
73's Erik
ON4PB
------------------------------
Message: 3
Date: Sun, 20 Jun 2021 19:39:29 +0000 (UTC)
From: Louis Fiore
<mailto:ltfi...@aol.com>
To:
"mailto:wsjt-devel@lists.sourceforge.net";
<mailto:wsjt-devel@lists.sourceforge.net>
Subject: [wsjt-devel] Transmit audio dropouts
Message-ID:
<mailto:385049449.2854162.1624217969...@mail.yahoo.com>
Content-Type: text/plain; charset="utf-8"
Good Afternoon,
Running version 2.4.0. Out of the blue I?ve noticed a few instances with my
Flex 6500 transmitter keying on but no audio is transmitted. It happens
randomly on both FT4 & FT8 about 10 to 20% of the time. Does anyone have an
idea what may be causing this?
73, Lou W2LTF
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
