Hi Stephen,
what do you have for the baud rate and poll interval in Omni-Rig?
Also what order do you start things up in, including turning on the rig?
73
Bill
G4WJS.
On 11/11/2021 14:22, Stephen Mitchell via wsjt-devel wrote:
It's an Icom IC-7610. I have it connected to the PC via the USB
connection on the radio. Initially, I had selected Icom IC-7610 from
the drop down menu when I set it up. But when I started using Log4OM
I had to switch to OmniRig to make it work. Everything was working
great until last weekend...I had done some operating Friday evening
without any issues. I closed the applications and shut the radio off
when I was done. I came into the shack on Saturday and fired
everything up then proceeded to try working some stations on 17M. On
the first transmission everything was fine...but on the second cycle
the tones came out of my computer speakers instead of going into the
radio. I closed the applications and started them back up again. The
same thing happened - first cycle was fine, but on the second cycle
the tones came out of my computer speakers. I couldn't find a cause
because nothing had changed on the PC, within Windows or with the
applications. So I uninstalled WSJT-X and JT-Alert then downloaded
and installed the latest versions of each. I initially had problems
getting it all to work but was able to work through all of those
issues except the two mentioned here.
On Thursday, November 11, 2021, 05:07:53 AM MST, Bill Somerville via
wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:
On 11/11/2021 11:57, Stephen Mitchell via wsjt-devel wrote:
I recently updated WSJT-X on my PC to the latest version and ever
since I’ve noticed two things:
1. I sized the windows for the waterfall and decodes to my liking
but with the latest version, when I start the application the
decodes window continues to open up larger than the waterfall
window, which stays at the size I set it to.
2. When I launch the application it sets the frequency .055 Hz
higher than what the frequency should be. I’ve included a
screenshot of what happens when I first launch the program. I
don’t know if these are true bugs or if I just don’t have
something configured properly.
Thank you – K7CB
Hi Stephen,
on your issue (2), what rig are you using and how is it hooked up to
WSJT-X for CAT control?
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
