Hi Charlie, may I ask were the Q65-60D recordings were EME or terrestrial ? I have found that with Q65 it is quite dependent on the 'decode after eme delay' setting as to whether the signal decodes or not.
After more testing last night, I found the samples from Lance W7GJ that decoded in Q65-60A but required me to have 'decode after eme delay' ticked which had me foxed for a few minutes. So far I have had no luck with any of the Q65-30A samples decoding, on air observations are the decoder works for one signal only. Checked again to be sure and the 'single decode' option is not enabled. If I go back and click on each signal I get a decode. It is behaving like the decoder is in DEEP mode even though FAST is selected. Regards, Peter, vk5pj Regards, Peter vk5pj On Tue, Jan 4, 2022 at 9:18 PM Charles Suckling via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Hi Peter > > This link has some Q65 examples, including simulated one with two > different Q65-60D signals in the passband. > > Make sure of course that you have 'single decode' in main settings > unchecked (!). > > > https://drive.google.com/drive/folders/1RMdrOT7SVIrTDz4hMdmzZkfXJ2daf0yu?usp=sharing > > 73 > > Charlie G3WDG > > > > On Tue, 4 Jan 2022 at 10:24, Peter Sumner via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > >> Hi, >> at some point the Q65 decoder engine has stopped showing decodes from >> multiple signals in the WSJT-X passband and I am at a loss to explain how >> or when this has occurred. >> >> I have downloaded the sample files from the main Pulsar web site and >> tried to follow the Q65 quick start guide to no avail. >> >> At this point none of the Q65-30A sample WAV files produce a decode for >> me, the single sample for Q65-60A seems to have two signals but can not get >> either to decode no matter what combination of Fast, Deep or Normal I have >> tried. >> >> While I have successfully had some Q65 contacts to the USA today from >> Australia, it is making me doubt the results of the decoder. >> >> Does anyone in the group have some proven Sample WAV files with multiple >> stations in a period I could try? (other than the ones from the WSJT-X web >> site) >> >> So far tried WSJT-X version, 2.4, 2.50, 2.51 and 2.54 with the >> same result. I know this used to work for me as in June July it was doing >> multi pass decoding on the openings to the EU and was working on EME during >> the recent W7GJ trip away. >> >> I am leaning to this being a problem with a windows update as going back >> and testing with v2.4 should have given me good results but alas no >> >> Still scratching my head. >> >> Regards, >> Peter, vk5pj >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
