OK I did find that – but it made no difference. For me anyway – it’s not a USB issue. It’s an audio issue.
I see now that my monitors (Samsung via HDMI) coupled with the NVIDIA driver/control panel, keep grabbing the audio. When my Tx audio drops, I can click my fingers and see the click on the radio scope. The sound is being re-directed from the NVIDIA/Monitors. If I turn these to OFF It stabilises. However, after reboot, the monitors grab control back again. I can’t seem to make this OFF settings persistent. Alan McDonald Worimi Country 0413 657 427 From: Black Michael via wsjt-devel <wsjt-devel@lists.sourceforge.net> Sent: Wednesday, 23 November 2022 4:02 PM To: Alan McDonald via wsjt-devel <wsjt-devel@lists.sourceforge.net> Cc: Black Michael <mdblac...@yahoo.com> Subject: Re: [wsjt-devel] FW: 2.6.0 RC and HamRadioDeluxe Radio issue On my Windows 11 desktop it has it. On Tuesday, November 22, 2022 at 04:57:06 PM CST, Alan McDonald via wsjt-devel <wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> > wrote: I'm not using a laptop with a battery. These settings, as you describe, are not available on a mains power PC Alan McDonald Worimi Country 0413 657 427 -----Original Message----- From: Glenn Williams via wsjt-devel <wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> > Sent: Wednesday, 23 November 2022 12:12 AM To: wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> Cc: Glenn Williams <a...@alumni.caltech.edu <mailto:a...@alumni.caltech.edu> > Subject: Re: [wsjt-devel] FW: 2.6.0 RC and HamRadioDeluxe Radio issue I thought I remembered something about USB ports. I googled: "windows 10 USB ports randomly stop working" and got "Go to Power Options > Change Plan Settings > Change advanced power settings. Find USB Settings, then drill down to USB selective suspend setting. Disable the options next to On battery and Plugged in, then click Apply. You must then restart your PC to stop it from turning off the USB ports unnecessarily." ---Glenn, AF8C On 11/22/2022 1:27 AM, Alan McDonald via wsjt-devel wrote: > OK so I’ve been running standard V2.5.4, IC-7300 on COM6 > > I have made further observations. > > I have all the devices I can find set to not sleep. > > After leaving WSJT-X running for a while, I often come back to find it > won’t transmit. It is still decoding fine. > > (as reported before using the HamRadioDeluxe radio) > > I tried quite a few things to make it come back to Txing other than > exit/restart cycling. > > I have found that going to Settings|Audio|Output and selecting > something other than (3-USB etc) e.g. > > Then re-selecting 3_USB > > My tx comes back into operation. > > I also tried moving my USB cable over to another port on the PC but > this makes no difference other than changin from say 2-USB to 3-USB etc. > > Alan McDonald > > Worimi Country > -- This email has been checked for viruses by Avast antivirus software. www.avast.com <http://www.avast.com> _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
