Hello Alan, there is one thing you should keep in mind before making your final decision, there are limits on the number of endpoint devices for both USB2 and USB3 and these total-up on a per controller bassis, you can see each USB Controller in Windows Device manager. These endpoints include the serial ports, sound devices, mice and keyboard we all seem to accumulate.
In general while USB 3 is considered to be the fast and logical option for most things, it can have far fewer endpoint devices connected than its slower USB 2 cousin. If you google the term "Not Enough USB Controller Resources" you will start to understand what the limits are and ways to check your system. I see this USB problem regularly when my Elad FMDUO is connected to its own mini desktop PC and that's just three USB leads, as the DUO has a tonne of internal endpoints that are presented to Windows so I have distribute the leads across USB2 at the rear, USB2 on the front and USB3 to get everything to play. Wish you the best of luck with your setup, regards, Peter, vk5pj On Mon, Nov 28, 2022 at 3:43 PM Alan McDonald via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > OK it's been 2d since my last setup alteration and I have not experienced > any TX dropout. > > I moved my radio to another USB port type 3.0. (as opposed to a non 3.0 > speed type) > I can confirm at least on my setup, that there is no longer an issue with > dropping Tx audio. The HamRadioDeluxe radio + USB Codecs are now solid and > Tx does not drop out. > > > I have even reinstated the sleep to “enabled” on all devices and still > there are no dropouts. > > > So, in my experience, this is not something to do with ports "sleeping", > it's all to do with USB port speed. I suspect that having CAT + 2way Audio > feeds + switching, on one port, is more demanding than a normal USB can > handle. > > > > It’s nice to be able to leave the HamRadioDeulxe rig control ON and open > and close WSJT-X without having to shut things down and start them up again. > > > > Thanks for your patients and assistance. This was a rather long series of > changes and testing periods in all this. But it’s a nice feeling to have it > sorted. > > > > Alan McDonald > > Worimi Country > > > > *From:* Black Michael via wsjt-devel <wsjt-devel@lists.sourceforge.net> > *Sent:* Wednesday, 23 November 2022 4:02 PM > *To:* Alan McDonald via wsjt-devel <wsjt-devel@lists.sourceforge.net> > *Cc:* Black Michael <mdblac...@yahoo.com> > *Subject:* Re: [wsjt-devel] FW: 2.6.0 RC and HamRadioDeluxe Radio issue > > > > On my Windows 11 desktop it has it. > > > > [image: Inline image] > > > > > > > > > > On Tuesday, November 22, 2022 at 04:57:06 PM CST, Alan McDonald via > wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: > > > > > > I'm not using a laptop with a battery. These settings, as you describe, > are not available on a mains power PC > > Alan McDonald > Worimi Country > 0413 657 427 > > -----Original Message----- > From: Glenn Williams via wsjt-devel <wsjt-devel@lists.sourceforge.net> > Sent: Wednesday, 23 November 2022 12:12 AM > To: wsjt-devel@lists.sourceforge.net > Cc: Glenn Williams <a...@alumni.caltech.edu> > Subject: Re: [wsjt-devel] FW: 2.6.0 RC and HamRadioDeluxe Radio issue > > I thought I remembered something about USB ports. > > I googled: "windows 10 USB ports randomly stop working" > > and got > > "Go to Power Options > Change Plan Settings > Change advanced power > settings. Find USB Settings, then drill down to USB selective suspend > setting. Disable the options next to On battery and Plugged in, then click > Apply. You must then restart your PC to stop it from turning off the USB > ports unnecessarily." > > ---Glenn, AF8C > > On 11/22/2022 1:27 AM, Alan McDonald via wsjt-devel wrote: > > OK so I’ve been running standard V2.5.4, IC-7300 on COM6 > > > > I have made further observations. > > > > I have all the devices I can find set to not sleep. > > > > After leaving WSJT-X running for a while, I often come back to find it > > won’t transmit. It is still decoding fine. > > > > (as reported before using the HamRadioDeluxe radio) > > > > I tried quite a few things to make it come back to Txing other than > > exit/restart cycling. > > > > I have found that going to Settings|Audio|Output and selecting > > something other than (3-USB etc) e.g. > > > > Then re-selecting 3_USB > > > > My tx comes back into operation. > > > > I also tried moving my USB cable over to another port on the PC but > > this makes no difference other than changin from say 2-USB to 3-USB etc. > > > > Alan McDonald > > > > Worimi Country > > > > -- > This email has been checked for viruses by Avast antivirus software. > www.avast.com > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel