We moved from our condo to a bigger house a few months ago, and finally starting to catch up with projects. I have a dedicated box I use for Xastir/ham related stuff in the server rack in the basement, with a D700 using the built-in TNC for 144.39 (wx and igate) and TNC-X for 145.825 igating. At the condo, I had a pretty straight shot from the basement to the attic where I had the antenna set up. Not quite the same options at the house, so was looking at other options...
What I want to do is keep my Xastir server in the basement in the server rack, however in the attic have a Beaglebone (similar to Rasp Pi) running Ubuntu 12.10 connecting to the TNC. Ideally I'd use it to gate traffic as I had before, with the D700 connected locally to it, then have Xastir (or other network boxes in the house) connect thru that to gate to RF(or vice-versa). In the next couple weeks I'll be running network cable up to the attic and already have plenty of power jacks in there (it's partially finished.) I know Xastir could do this to a certain extent (i.e. I used to have other Linux boxes in the house with Xastir connect and gate thru the Xastir server.) But I would think it's a bit of overhead and space to install Xwindows etc on the embedded device just for Xastir to be headless. Are there any APRS server apps out there that fit with this? I loaded up Dixprs on a Beaglebone connect to the TNC-X/D700 to play with, but not sure it has this ability from what I can tell. I'd appreciate ideas.. thank you! -Mike KB1MTS _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
