On 10/09/15 10:58, Nick Evans wrote: > Hi Jarrod,
Hiya Nick (Carl says "hi" too), > Ports 1-8 are also set to use vlan 415. These ports actually have > compute nodes plugged into them. > > The thing that was strange for me is you only had to set 'switchport > access vlan 415' on port 43... > you didn't even have to set 'switchport mode acces' This sounds like a possible Cisco IOS bug, have you tried following it up with them? If you're on the SAGE-AU list (can't check from here) you could ask there too in case others have run into this. cheers, Chris -- Christopher Samuel Senior Systems Administrator VLSCI - Victorian Life Sciences Computation Initiative Email: [email protected] Phone: +61 (0)3 903 55545 http://www.vlsci.org.au/ http://twitter.com/vlsci ------------------------------------------------------------------------------ Monitor Your Dynamic Infrastructure at Any Scale With Datadog! Get real-time metrics from all of your servers, apps and tools in one place. SourceForge users - Click here to start your Free Trial of Datadog now! http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140 _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
