Hi Chris (and Carl)
At this stage i haven't spoken with cisco as i originally thought it was an
xcat logic problem and Jarrod seemed to be onto it.
I also haven't got to the point of asking on SAGE as i would like to dig
through and find the actual SNMP OID calls that i think are failing to
produce the error.
If Jarrod runs out of ideas then i might hit both SAGE and Cisco for an
answer.
Nick
On 10 September 2015 at 11:23, Christopher Samuel <[email protected]>
wrote:
> On 10/09/15 10:58, Nick Evans wrote:
>
> > Hi Jarrod,
>
> Hiya Nick (Carl says "hi" too),
>
> > Ports 1-8 are also set to use vlan 415. These ports actually have
> > compute nodes plugged into them.
> >
> > The thing that was strange for me is you only had to set 'switchport
> > access vlan 415' on port 43...
> > you didn't even have to set 'switchport mode acces'
>
> This sounds like a possible Cisco IOS bug, have you tried following it
> up with them?
>
> If you're on the SAGE-AU list (can't check from here) you could ask
> there too in case others have run into this.
>
> cheers,
> Chris
> --
> Christopher Samuel Senior Systems Administrator
> VLSCI - Victorian Life Sciences Computation Initiative
> Email: [email protected] Phone: +61 (0)3 903 55545
> http://www.vlsci.org.au/ http://twitter.com/vlsci
>
>
>
> ------------------------------------------------------------------------------
> Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
> Get real-time metrics from all of your servers, apps and tools
> in one place.
> SourceForge users - Click here to start your Free Trial of Datadog now!
> http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
> _______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
------------------------------------------------------------------------------
Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
Get real-time metrics from all of your servers, apps and tools
in one place.
SourceForge users - Click here to start your Free Trial of Datadog now!
http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
