Gilles Chanteperdrix <gilles.chanteperdrix <at> xenomai.org> writes:
> > ken barnett wrote: > > Hope you can help. > > > > My configuration is as follows: > > PXA25xx ADS card w/ NO PCI bridge > > Linux-2.6.24.5 kernel > > Xenomai 2.4.5 stable > > > > The Xenomai port to the kernel is as follows: > > > > ./prepare-kernel.sh linux=../../linux-2.6.24.5 > > --adeos=adeos-ipipe-2.6.24-arm-1.9-00.patch > > --adeos=adeos-ipipe-2.6.24-arm-1.9-01.patch --arch=arm > > > > ./xenomai-2.4.5/scripts/prepare-kernel.sh --linux=linux-2.6.24.5 > > --adeos=./xenomai-2.4.5/ksrc/arch/arm/patches/ > > adeos-ipipe-2.6.24-arm-1.9-01.patch > > > > I used 2 patches but have tried to use either/or with the > > same indications. > > > > configure CC=arm-linux-gcc --enable-arm-eabi > > --prefix=/home/dvdb-lite/rootfs/usr/xenomai --host=arm-linux > > --enable-arm-arch=pxa > > > > See attached for the output log1. > > > > Step 1: > > Looking at post from July 05, 2008 - 12:26: it states to turn on full debug to > > get the best output so that output file is attached also as debug3.log > > > > Step 2 > > Then it stated to turn off Xenomai all together: > > The log looks the same but is also attached as debug2.log > > > > Step 3 > > Turn off ipipe altogether > > The kernel/card is back to working. > > > > Hop you can help, > > I am afraid you forgot attachments, or url to them. > Oops: There is nowhere to attach a file so I will add them inline log1 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. pxa2xx_udc: version 30-June-2007 udc: disconnect from host udc: is connected ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk usb0: MAC 06:6d:0a:58:17:f1 udc: connect to host pccard: PCMCIA card inserted into slot 0 pcmcia: registering new device pcmcia0.0 mice: PS/2 mouse device common for all mice input: ADSmartIO AT keyboard as /class/input/input0 input: ADS784x touch screen as /class/input/input1 ts: ADS784x touchscreen initialized i2c /dev entries driver i2c-adapter i2c-0: registered adapter pxa2xx-i2c.0 rtc-ds1307 0-0068: ds1307 rtc found rtc-ds1307 0-0068: rtc core: registered ds1307 as rtc0 rtc-ds1307 0-0068: 56 bytes nvram ltc1663 0-0020: ltc1663 dac found SA1100/PXA2xx Watchdog Timer: timer margin 60 sec Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb pxamci: MMC/SD slot initialized Unable to set MCI power Unable to set MCI power usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). usbcore: registered new interface driver snd-usb-audio nf_conntrack version 0.5.0 (1024 buckets, 4096 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.2 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> XScale DSP coprocessor detected. AC'97 0 access error (not audio or modem codec) pxa2xx-ac97: probe of pxa2xx-ac97 failed with error -13 cpufreq: pxa255 cpu frequency driver initialized cpufreq: changing pxa255 frequency to 398 Mhz, (SDRAM 196 Mhz) mmc0: new SD card at address 0001 mmcblk0: mmc0:0001 SD2GB 2025984KiB mmcblk0: hda: SanDisk SDCFBI-256, CFA DISK drive ide0 at 0xcaa80000-0xcaa80007,0xcaa8000e on irq 205 hda: max request size: 128KiB hda: 501760 sectors (256 MB) w/1KiB Cache, CHS=980/16/32 hda:irq 9, desc: c0431354, depth: 0, count: 0, unhandled: 0 irq 9, desc: c0431354, depth: 0, count: 0, unhandled: 0 irq 9, desc: c0431354, depth: 0, count: 0, unhandled: 0 irq 9, desc: c0431354, depth: 0, count: 0, unhandled: 0 >From here it just continues! debug2.log Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. pxa2xx_udc: version 30-June-2007 udc: disconnect from host udc: is connected ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk usb0: MAC 36:0a:b7:83:e8:4d udc: connect to host pccard: PCMCIA card inserted into slot 0 pcmcia: registering new device pcmcia0.0 mice: PS/2 mouse device common for all mice input: ADSmartIO AT keyboard as /class/input/input0 input: ADS784x touch screen as /class/input/input1 ts: ADS784x touchscreen initialized i2c /dev entries driver i2c-adapter i2c-0: registered adapter pxa2xx-i2c.0 rtc-ds1307 0-0068: ds1307 rtc found rtc-ds1307 0-0068: rtc core: registered ds1307 as rtc0 rtc-ds1307 0-0068: 56 bytes nvram ltc1663 0-0020: ltc1663 dac found SA1100/PXA2xx Watchdog Timer: timer margin 60 sec Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb pxamci: MMC/SD slot initialized Unable to set MCI power Unable to set MCI power usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). usbcore: registered new interface driver snd-usb-audio nf_conntrack version 0.5.0 (1024 buckets, 4096 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.2 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> XScale DSP coprocessor detected. AC'97 0 access error (not audio or modem codec) pxa2xx-ac97: probe of pxa2xx-ac97 failed with error -13 cpufreq: pxa255 cpu frequency driver initialized cpufreq: changing pxa255 frequency to 398 Mhz, (SDRAM 196 Mhz) mmc0: new SD card at address 0001 mmcblk0: mmc0:0001 SD2GB 2025984KiB mmcblk0: hda: SanDisk SDCFBI-256, CFA DISK drive ide0 at 0xcaa80000-0xcaa80007,0xcaa8000e on irq 205 hda: max request size: 128KiB hda: 501760 sectors (256 MB) w/1KiB Cache, CHS=980/16/32 hda:irq 9, desc: c03ff2d4, depth: 0, count: 0, unhandled: 0 irq 9, desc: c03ff2d4, depth: 0, count: 0, unhandled: 0 irq 9, desc: c03ff2d4, depth: 0, count: 0, unhandled: 0 irq 9, desc: c03ff2d4, depth: 0, count: 0, unhandled: 0 irq 9, desc: c03ff2d4, depth: 0, count: 0, unhandled: 0 irq 9, desc: c03ff2d4, depth: 0, count: 0, unhandled: 0 irq 9, desc: c03ff2d4, depth: 0, count: 0, unhandled: 0 irq 9, desc: c03ff2d4, depth: 0, count: 0, unhandled: 0 irq 9, desc: c03ff2d4, depth: 0, count: 0, unhandled: 0 debug3.log Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. pxa2xx_udc: version 30-June-2007 udc: disconnect from host udc: is connected ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk usb0: MAC 26:cb:79:29:ff:48 udc: connect to host pccard: PCMCIA card inserted into slot 0 pcmcia: registering new device pcmcia0.0 mice: PS/2 mouse device common for all mice input: ADSmartIO AT keyboard as /class/input/input0 input: ADS784x touch screen as /class/input/input1 ts: ADS784x touchscreen initialized i2c /dev entries driver i2c-adapter i2c-0: registered adapter pxa2xx-i2c.0 rtc-ds1307 0-0068: ds1307 rtc found rtc-ds1307 0-0068: rtc core: registered ds1307 as rtc0 rtc-ds1307 0-0068: 56 bytes nvram ltc1663 0-0020: ltc1663 dac found SA1100/PXA2xx Watchdog Timer: timer margin 60 sec Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb pxamci: MMC/SD slot initialized Unable to set MCI power Unable to set MCI power usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). usbcore: registered new interface driver snd-usb-audio nf_conntrack version 0.5.0 (1024 buckets, 4096 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.2 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> XScale DSP coprocessor detected. mmc0: new SD card at address 0001 mmcblk0: mmc0:0001 SD2GB 2025984KiB mmcblk0:<3>AC'97 0 access error (not audio or modem codec) pxa2xx-ac97: probe of pxa2xx-ac97 failed with error -13 cpufreq: pxa255 cpu frequency driver initialized cpufreq: changing pxa255 frequency to 398 Mhz, (SDRAM 196 Mhz) hda: SanDisk SDCFBI-256, CFA DISK drive ide0 at 0xcaa80000-0xcaa80007,0xcaa8000e on irq 205 hda: max request size: 128KiB hda: 501760 sectors (256 MB) w/1KiB Cache, CHS=980/16/32 hda:irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0 irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0 ->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000 IRQ_NOPROBE set IRQ_NOREQUEST set __ipipe_ack_bad_irq: unknown flow handler for IRQ 9 irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0 ->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000 IRQ_NOPROBE set IRQ_NOREQUEST set irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0 ->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000 IRQ_NOPROBE set IRQ_NOREQUEST set irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0 ->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000 IRQ_NOPROBE set IRQ_NOREQUEST set irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0 ->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000 IRQ_NOPROBE set IRQ_NOREQUEST set irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0 ->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000 IRQ_NOPROBE set IRQ_NOREQUEST set irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0 ->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000 IRQ_NOPROBE set IRQ_NOREQUEST set irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0 ->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000 IRQ_NOPROBE set IRQ_NOREQUEST set irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0 ->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000 IRQ_NOPROBE set IRQ_NOREQUEST set irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0 ->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000 IRQ_NOPROBE set IRQ_NOREQUEST set irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0 ->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000 IRQ_NOPROBE set IRQ_NOREQUEST set irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0 _______________________________________________ Xenomai-help mailing list Xenomai-help@gna.org https://mail.gna.org/listinfo/xenomai-help