I figured out the fix. There was a hard coded minor number for a misc device register for the GPIO.
For some reason PERVASIVE conflicted with it. Changed it to dynamic assign ID and it worked fine. Linux serial now works. On 3/21/12 3:43 AM, "Gilles Chanteperdrix" <[email protected]> wrote: > On 03/21/2012 05:46 AM, Glen Wernersbach wrote: >> I am going to start trying to see if I can figure out what is not getting >> set. >> >> By the way. This board also has 4 other serial ports on a 8250.c driver. It >> also fails under the xeno build. > > But the serial console works, right? So there is at least on serial port > working. -- Glen Wernersbach President & CTO Jetsoft Development Co. 629 Old St Rt. 74 Suite 210 Cincinnati, Oh 45244 Custom Programming Web Site: www.jetsoftdev.com Retail Products Web Site: www.scanhelp.com Phone: 513-528-6660 Fax: 513-528-3470 Cell 513-240-9929 ---- Partner for Software Technology Jacobs Automation 2365 Progress Drive Hebron, KY 41048 (513) 297-7550 ---- "Support Dyslexia Research" _______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
