On Wednesday, February 19, 2014 12:32 PM, Paul <[email protected]> wrote: On Wednesday 19 February 2014, Huub Van Niekerk wrote:
> The patch you created for the armhf architecture, will it work with > older Linux kernels such as 2.6.x and 3.2.x as well ? >Just to clarify, the patch that I submitted is for the Broadcom BCM2835 >SoC (an ARMv6K core) - armhf covers a variety of ARM flavours. >If you can find a 2.6.xx kernel that has support for the BCM2835 AND >includes the DWC-OTG drivers, there is no reason why the Raspberry Pi >patch couldn't be adapted. >The 3.2.x kernel reportedly had a few serious bugs - I don't know if >these bugs impacted on the BCM2835 or the operation of Xenomai. If you >are looking at using a 3.x.x series kernel, it would be advisable to >get the latest stable release that has a corresponding Xenomai patch. I just tried to build xenomai-2.6.2 on armhf (after applying your patch) using debuild -us -uc. This fails with an error I had before: fatal error at line 1350: dpkg-buildpackage -rfakeroot -B -us -uc failed. Does this mean that your patch is not suitable for v. 2.6.2 ? _______________________________________________ Xenomai mailing list [email protected] http://www.xenomai.org/mailman/listinfo/xenomai
