On Thursday, February 20, 2014 3:44 PM, Gilles Chanteperdrix <[email protected]> wrote: On 02/20/2014 03:35 PM, Huub Van Niekerk wrote: > > > > On Thursday, February 20, 2014 2:39 PM, Gilles Chanteperdrix > <[email protected]> wrote: > On 02/20/2014 02:24 PM, Huub Van Niekerk wrote: > > > > > > > On Wednesday, February 19, 2014 12:32 PM, Paul <[email protected] > <mailto:[email protected]>> > > wrote: > > > > On Wednesday 19 February 2014, Huub Van Niekerk wrote: > > > >> The patch you created for the armhf architecture, will it work > >> with older Linux kernels such as 2.6.x and 3.2.x as well ? > > > >> Just to clarify, the patch that I submitted is for the Broadcom > >> BCM2835 SoC (an ARMv6K core) - armhf covers a variety of ARM > >> flavours. > > > >> If you can find a 2.6.xx kernel that has support for the BCM2835 > >> AND includes the DWC-OTG drivers, there is no reason why the > >> Raspberry Pi patch couldn't be adapted. > > > >> The 3.2.x kernel reportedly had a few serious bugs - I don't know > >> if these bugs impacted on the BCM2835 or the operation of Xenomai. > >> If you are looking at using a 3.x.x series kernel, it would be > >> advisable to get the latest stable release that has a corresponding > >> Xenomai patch. > > > > I just tried to build xenomai-2.6.2 on armhf (after applying your > > patch) using debuild -us -uc. This fails with an error I had before: > > fatal error at line 1350: dpkg-buildpackage -rfakeroot -B -us -uc > > failed. Does this mean that your patch is not suitable for v. 2.6.2 > > > ? > > >Please do not use 2.6.2, it was so buggy that 2.6.2.1 was released just > >a little time after. And in fact, there is no reason not to use 2.6.3, > >it is ABI compatible with 2.6.2 and 2.6.2.1. > > OK. The reason I tried 2.6.2 is that this version has a patch for kernel > 3.2, which 2.6.3 has not, as far as I can see.
>Bad reason: >- the patch for 3.2 is broken, as has been said several times on this >mailing list, including in the very first answer you received in this >same discussion thread; >- the latest version of Xenomai should be compatible with all the past >patches (though it only has been well tested with the latest patch it >provides). Ok, thank you for reminding me. Will keep using the latest version I had. _______________________________________________ Xenomai mailing list [email protected] http://www.xenomai.org/mailman/listinfo/xenomai
