On Tue, Nov 18, 2014 at 03:53:03PM -0500, Lennart Sorensen wrote:
> On Tue, Nov 18, 2014 at 09:28:33PM +0100, Gilles Chanteperdrix wrote:
> > On Tue, Nov 18, 2014 at 08:28:46PM +0100, Gilles Chanteperdrix wrote:
> > > What if you remove SYSC_HAS_SIDLEMODE here ?
>
> I suspect that would work, but I was trying not to mess with the hwmod
> if I could. I am trying the ti,no-idle again since I screwed up the
> test and it might actually work.
>
> > Another thing, what if you remove PM_RUNTIME in the kernel
> > configuration completely? On my omap3 and omap4 boards, this results
> > in some stupid warnings at boot time, but the system runs just fine.
> > And maybe this bypasses all that hwmod awful stuff.
>
> TI is so sloppy that doing that causes a ton of compile errors. Half the
> power management code is wrapped in CONFIG_PM and the other half is not.
You are right. My configurations have PM_RUNTIME enabled both on
OMAP3 and OMAP4. I am almost sure I used to turn it off. But it may
be a while since I tested it.
--
Gilles.
_______________________________________________
Xenomai mailing list
[email protected]
http://www.xenomai.org/mailman/listinfo/xenomai
