> I have the parport module compiled and insmoded/ > I then run modconf to configure the gamecon module > I pass it the gc=0,7 or gc=0,7,0,0,0,0 to tell it I am using a PSX pad > on parport0
> and I get this error > /lib/modules/2.4.18/kernel/drivers/char/joystick/gamecon.o: init_module: > No such device > Hint: insmod errors can be caused by incorrect module parameters, > including invalid IO or IRQ parameters > /lib/modules/2.4.18/kernel/drivers/char/joystick/gamecon.o: insmod > /lib/modules/2.4.18/kernel/drivers/char/joystick/gamecon.o failed > /lib/modules/2.4.18/kernel/drivers/char/joystick/gamecon.o: insmod > gamecon failed gc=0,7 should be fine. What's 'dmesg' say? Is your parallel port 0x378? Is 'lp' loaded? You shouldn't even get this far if it is, but just in case... Oh, and is the pad a genuine sony pad, or a clone pad? B -- * [EMAIL PROTECTED] * http://clickass.org * ICQ# 1107012 * AIM/Yahoo: theGREENzebra * http://mp3.com/thegreenzebra -----GEEK CODE 3.12----- GCM/CS/IT/MU d? s: a22 C++++ UL++++ P+ L+++>$ E---- W++ N+ o K- w---$ O- M V-- PS+ PE Y+ PGP- t++(+++) 5- X R tv(+) b+(-) DI+++ D+ G++ e h++ r+(---) y+ UF*++ _______________________________________________ Xmame mailing list [EMAIL PROTECTED] http://toybox.twisted.org.uk/mailman/listinfo/xmame
