my dmesg is attached.
How do I know if my parallel port is 0x378?
And what is lp? Is that a module? I use make xconfig, so what section
is it under?
And yes it is a genuine Sony Playstation Dual Shock controller.
This is my first time trying to use the parallel port for anything in
Linux so I am pretty green at this.
Thanks for your help.
--
Jay Graves
[EMAIL PROTECTED]
jay.skabber.com
Linux version 2.4.18 (root@laptop) (gcc version 2.95.4 20011002 (Debian prerelease)) #3 Sun Jun 2 22:55:19 MDT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000027ff0000 (usable)
BIOS-e820: 0000000027ff0000 - 0000000027ff3000 (ACPI NVS)
BIOS-e820: 0000000027ff3000 - 0000000028000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 163824
zone(0): 4096 pages.
zone(1): 159728 pages.
zone(2): 0 pages.
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Kernel command line: auto BOOT_IMAGE=Linux-apm ro root=1603
Initializing CPU#0
Detected 800.057 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1595.80 BogoMIPS
Memory: 642060k/655296k available (1606k kernel code, 12852k reserved, 497k data, 244k init, 0k highmem)
Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 800.0409 MHz.
..... host bus clock speed is 200.0102 MHz.
cpu: 0, clocks: 2000102, slice: 1000051
CPU0<T0:2000096,T1:1000032,D:13,S:1000051,C:2000102>
PCI: PCI BIOS revision 2.10 entry at 0xfb430, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
PCI: Disabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
Journalled Block Device driver loaded
NTFS driver v1.1.22 [Flags: R/O]
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 91020U3, ATA DISK drive
hdb: Maxtor 53073H6, ATA DISK drive
hdc: Maxtor 91536D6, ATA DISK drive
hdd: CD-ROM 32X/AKU, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 19541088 sectors (10005 MB) w/2048KiB Cache, CHS=19386/16/63
hdb: 60030432 sectors (30736 MB) w/2048KiB Cache, CHS=3736/255/63
hdc: 30000096 sectors (15360 MB) w/512KiB Cache, CHS=29762/16/63
hdd: ATAPI 20X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1
hdb: hdb1
hdc: [PTBL] [1867/255/63] hdc1 hdc2 hdc3 hdc4 < hdc5 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 564M
agpgart: Detected Via Apollo Pro KT133 chipset
agpgart: AGP aperture is 64M @ 0xd8000000
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 11 for device 00:0f.0
spurious 8259A interrupt: IRQ7.
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
<Adaptec 2902/04/10/15/20/30C SCSI adapter>
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
Vendor: PLEXTOR Model: CD-R PX-R412C Rev: 1.07
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:A:1): 10.000MB/s transfers (10.000MHz, offset 8)
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 12x/12x writer cd/rw xa/form2 cdda caddy
es1371: version v0.30 time 11:08:35 Jun 2 2002
Creative EMU10K1 PCI Audio Driver, version 0.18, 11:08:29 Jun 2 2002
PCI: Found IRQ 5 for device 00:09.0
emu10k1: EMU10K1 rev 4 model 0x21 found, IO at 0xdc00-0xdc1f, IRQ 5
ac97_codec: AC97 codec, id: 0x5452:0x4103 (TriTech TR28023)
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 10 for device 00:07.2
PCI: Sharing IRQ 10 with 00:07.3
PCI: Sharing IRQ 10 with 00:0b.0
uhci.c: USB UHCI at I/O 0xd400, IRQ 10
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 10 for device 00:07.3
PCI: Sharing IRQ 10 with 00:07.2
PCI: Sharing IRQ 10 with 00:0b.0
uhci.c: USB UHCI at I/O 0xd800, IRQ 10
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 244k freed
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x46d/0xc00c) is not claimed by any active driver.
hub.c: USB new device connect on bus1/2, assigned device number 3
usb.c: USB device 3 (vend/prod 0x46d/0xc20b) is not claimed by any active driver.
Adding Swap: 465844k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide1(22,3), internal journal
usb.c: registered new driver hid
input0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb1:2.0
input1: USB HID v1.10 Joystick [Logitech WingMan Action Pad] on usb1:3.0
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
PCI: Found IRQ 10 for device 00:0b.0
PCI: Sharing IRQ 10 with 00:07.2
PCI: Sharing IRQ 10 with 00:07.3
tulip0: MII transceiver #1 config 3000 status 7829 advertising 01e1.
eth0: Lite-On 82c168 PNIC rev 32 at 0xe400, 00:A0:CC:54:19:72, IRQ 10.
usb.c: registered new driver wacom
wacom.c: v1.21:USB Wacom Graphire and Wacom Intuos tablet driver
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,65), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/vmmon: Module vmmon: registered with major=10 minor=165 tag=$Name: build-1455 $
/dev/vmmon: Module vmmon: initialized
/dev/vmnet: open called by PID 418 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
/dev/vmnet: open called by PID 441 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
nvidia: loading NVIDIA NVdriver Kernel Module 1.0-2960 Tue May 14 07:41:42 PDT 2002
/dev/vmnet: open called by PID 725 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 730 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
NVRM: AGPGART: VIA Apollo KT133 chipset
NVRM: AGPGART: aperture: 64M @ 0xd8000000
NVRM: AGPGART: aperture mapped from 0xd8000000 to 0xe99dd000
NVRM: AGPGART: mode 4x
NVRM: AGPGART: allocated 16 pages
/dev/vmnet: open called by PID 756 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 751 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
(scsi0:A:1): 5.000MB/s transfers (5.000MHz, offset 8)
NVRM: AGPGART: allocated 258 pages
NVRM: AGPGART: freed 258 pages
NVRM: AGPGART: allocated 258 pages
NVRM: AGPGART: allocated 2304 pages
NVRM: AGPGART: freed 2304 pages
NVRM: AGPGART: freed 258 pages
NVRM: AGPGART: allocated 258 pages
NVRM: AGPGART: allocated 2304 pages
NVRM: AGPGART: freed 2304 pages
NVRM: AGPGART: freed 258 pages
NVRM: AGPGART: allocated 258 pages
NVRM: AGPGART: freed 258 pages
