Section "DRI"
Mode 0666
EndSection
in your XF86Config file.
Hope this helps,
Owen
Mukhben Singh wrote:
Hi,
I have been struggling with it for almost a week now. I have
compiled the kernel over and over again, changed the X Config file
numerous times but still am not getting the expected results. To cut a
long story short, the frame rate in tuxracer is pathetic. Actually in the
log files, DRI and AGPart are reported to be enabled, but still glxinfo
returns Direct Rendering: NO and I guess that is why the frame rates are
so bad. Also the display in TUXRACER is garbled.
The new kernel which I compiled after applying the suggested (
suggested by Thomas who has written drivers for my vid card ) code for the
kernel frame buffer, seems to work fine except for a couple of modules
which are not related to video display ( supermount and sound ). I am
attaching all the relevant files.
System Details:
K7SEM mobo
AMD Duron 800 MHz
128 MB RAM (32 MB shared vid mem)
SiS730S chipset
Onboard sound and Video
Base Installation: Mandrake 9.0
Compiled Kernel 2.4.19
1024x768 @ 24bpp
Please advice.
Thanks in advance,
Mukhben.
------------------------------------------------------------------------
Linux version 2.4.19 ([EMAIL PROTECTED]) (gcc version 3.2 (Mandrake Linux 9.0 3.2-1mdk)) #2 Sun Nov 24 19:27:18 GMT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000005ff0000 (usable)
BIOS-e820: 0000000005ff0000 - 0000000005ff3000 (ACPI NVS)
BIOS-e820: 0000000005ff3000 - 0000000006000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
95MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 24560
zone(0): 4096 pages.
zone(1): 20464 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=linux-exp ro root=307 devfs=mount,video=sisfb:mode:none,mem=12288
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 801.827 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1599.07 BogoMIPS
Memory: 94872k/98240k available (1152k kernel code, 2980k reserved, 401k data, 116k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU: AMD Duron(tm) Processor stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 801.8231 MHz.
..... host bus clock speed is 200.4556 MHz.
cpu: 0, clocks: 2004556, slice: 1002278
CPU0<T0:2004544,T1:1002256,D:10,S:1002278,C:2004556>
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb370, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router SIS [1039/0008] at 00:01.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
devfs: v1.12a (20020514) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
sisfb: Video ROM found and mapped to c00c0000
sisfb: Framebuffer at 0xd0000000, mapped to 0xc6804000, size 32768k
sisfb: MMIO at 0xdc000000, mapped to 0xc8805000, size 128k
sisfb: Memory heap starting at 12288K
sisfb: SiS301LVX bridge detected (revision 0xff)
sisfb: Mode is 800x600x8 (60Hz)
sisfb: Added MTRRs
Console: switching to colour frame buffer device 100x37
sisfb: Installed SISFB_GET_INFO ioctl (80046ef8)
sisfb: 2D acceleration is enabled, scrolling mode ypan
fb0: SIS 730 frame buffer device, Version 1.5.11
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 01
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS730
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD200EB-11BHF0, ATA DISK drive
hdb: CD-ROM Drive/G6D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2434/255/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
PPP generic driver version 2.4.2
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 116k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 5 for device 00:01.2
PCI: Sharing IRQ 5 with 00:01.3
usb-ohci.c: USB OHCI at membase 0xc8841000, IRQ 5
usb-ohci.c: usb-00:01.2, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 5 for device 00:01.3
PCI: Sharing IRQ 5 with 00:01.2
usb-ohci.c: USB OHCI at membase 0xc8843000, IRQ 5
usb-ohci.c: usb-00:01.3, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usbdevfs: remount parameter error
Adding Swap: 257000k swap-space (priority -1)
MSDOS FS: IO charset iso8859-15
MSDOS FS: Using codepage 850
FAT: freeing iocharset=iso8859-15
MSDOS FS: IO charset iso8859-15
MSDOS FS: Using codepage 850
FAT: freeing iocharset=iso8859-15
------------------------------------------------------------------------
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
client glx vendor string: SGI
client glx version string: 1.2
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
OpenGL vendor string: VA Linux Systems, Inc.
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 Mesa 3.4.2
OpenGL extensions:
GL_ARB_multitexture, GL_EXT_abgr, GL_EXT_blend_color, GL_EXT_blend_minmax, GL_EXT_blend_subtract
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x22 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x24 24 tc 0 24 0 r . . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x25 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x26 24 tc 0 24 0 r . . 8 8 8 0 0 32 0 0 0 0 0 0 0 None
0x27 24 tc 0 24 0 r y . 8 8 8 0 0 32 0 0 0 0 0 0 0 None
0x28 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x29 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x2a 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 16 16 16 16 0 0 None
0x2b 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 16 16 16 16 0 0 None
0x2c 24 tc 0 24 0 r . . 8 8 8 0 0 16 0 16 16 16 16 0 0 None
0x2d 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 16 16 16 16 0 0 None
0x2e 24 tc 0 24 0 r . . 8 8 8 0 0 32 0 16 16 16 16 0 0 None
0x2f 24 tc 0 24 0 r y . 8 8 8 0 0 32 0 16 16 16 16 0 0 None
0x30 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 16 16 16 16 0 0 None
0x31 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 16 0 0 None
------------------------------------------------------------------------
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work
EndSection
Section "Module"
Load "ddc"
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
#Load "pex5"
Load "record"
#Load "xie"
Load "bitmap"
Load "freetype"
Load "speedo"
Load "type1"
Load "vbe"
Load "int10"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
Option "XkbOptions" ""
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons"
Option "Emulate3Timeout" "50"
EndSection
Section "Monitor"
Identifier "monitor1"
VendorName "Plug'n Play"
ModelName "LG StudioWorks 56i"
HorizSync 30.0-65.0
VertRefresh 50.0-120.0
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Section "Device"
Identifier "device1"
VendorName "Silicon Integrated Systems [SiS]"
BoardName "SiS 630"
Driver "sis"
Option "DPMS"
Option "MaxXFBMem" "12288"
#Option "hw_cursor" "false" # Added on 15/11/2002 by Mukhben
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
EndSection
Section "DRI"
Mode 0666
EndSection
------------------------------------------------------------------------
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 730 Host (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: <available only to root>
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 80 [Master])
Subsystem: Elitegroup Computer Systems: Unknown device 0a01
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16
Region 4: I/O ports at 4000 [size=16]
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] 7001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin D routed to IRQ 5
Region 0: Memory at dc101000 (32-bit, non-prefetchable) [size=4K]
00:01.3 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS]: Unknown device 7000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin D routed to IRQ 5
Region 0: Memory at dc102000 (32-bit, non-prefetchable) [size=4K]
00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 02)
Subsystem: Elitegroup Computer Systems: Unknown device 0a01
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at dc100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:02.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dc000000-dc0fffff
Prefetchable memory behind bridge: d0000000-d7ffffff
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D (rev 31) (prog-if 00 [VGA])
Subsystem: Elitegroup Computer Systems: Unknown device 0a01
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
BIST result: 00
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at dc000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d000 [size=128]
Capabilities: <available only to root>
------------------------------------------------------------------------
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18-23mdkenterprise i686 [ELF] Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Nov 24 22:48:48 2002
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "monitor1"
(**) | |-->Device "device1"
(**) |-->Input Device "Keyboard1"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "gb"
(**) XKB: layout: "gb"
(WW) Option "XkbOptions" requires an string value
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse1"
(**) FontPath set to "unix/:-1"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
Using vt 7
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80000140, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0730 card 0000,0000 rev 02 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1039,5513 card 1019,0a01 rev d0 class 01,01,80 hdr 80
(II) PCI: 00:01:0: chip 1039,0008 card 0000,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:01:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:3: chip 1039,7001 card 1039,7000 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:4: chip 1039,7018 card 1019,0a01 rev 02 class 04,01,00 hdr 00
(II) PCI: 00:02:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 01:00:0: chip 1039,6300 card 1019,0a01 rev 31 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1: bridge is at (0:1:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x0e (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[1] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[2] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[3] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xdc000000 - 0xdc0fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
(--) PCI:*(1:0:0) SiS 630 rev 49, Mem @ 0xd0000000/27, 0xdc000000/17, I/O @ 0xd000/7
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xdc100000 - 0xdc100fff (0x1000) MX[B]
[1] -1 0xdc102000 - 0xdc102fff (0x1000) MX[B]
[2] -1 0xdc101000 - 0xdc101fff (0x1000) MX[B]
[3] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B]
[4] -1 0xdc000000 - 0xdc01ffff (0x20000) MX[B](B)
[5] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[6] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[7] -1 0x00004000 - 0x0000400f (0x10) IX[B]
[8] -1 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xdc100000 - 0xdc100fff (0x1000) MX[B]
[1] -1 0xdc102000 - 0xdc102fff (0x1000) MX[B]
[2] -1 0xdc101000 - 0xdc101fff (0x1000) MX[B]
[3] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B]
[4] -1 0xdc000000 - 0xdc01ffff (0x20000) MX[B](B)
[5] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[6] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[7] -1 0x00004000 - 0x0000400f (0x10) IX[B]
[8] -1 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdc100000 - 0xdc100fff (0x1000) MX[B]
[6] -1 0xdc102000 - 0xdc102fff (0x1000) MX[B]
[7] -1 0xdc101000 - 0xdc101fff (0x1000) MX[B]
[8] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B]
[9] -1 0xdc000000 - 0xdc01ffff (0x20000) MX[B](B)
[10] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[14] -1 0x00004000 - 0x0000400f (0x10) IX[B]
[15] -1 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "sis"
(II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o
(II) Module sis: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.6.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
SIS315PRO, SIS550, SIS650/M650/651/740, SIS330(Xabre)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset SIS630/730 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdc100000 - 0xdc100fff (0x1000) MX[B]
[6] -1 0xdc102000 - 0xdc102fff (0x1000) MX[B]
[7] -1 0xdc101000 - 0xdc101fff (0x1000) MX[B]
[8] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B]
[9] -1 0xdc000000 - 0xdc01ffff (0x20000) MX[B](B)
[10] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[14] -1 0x00004000 - 0x0000400f (0x10) IX[B]
[15] -1 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdc100000 - 0xdc100fff (0x1000) MX[B]
[6] -1 0xdc102000 - 0xdc102fff (0x1000) MX[B]
[7] -1 0xdc101000 - 0xdc101fff (0x1000) MX[B]
[8] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B]
[9] -1 0xdc000000 - 0xdc01ffff (0x20000) MX[B](B)
[10] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[11] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[17] -1 0x00004000 - 0x0000400f (0x10) IX[B]
[18] -1 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
[19] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[20] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) SIS(0): SiS driver (02/10/31-1) by Thomas Winischhofer <[EMAIL PROTECTED]>
(--) SIS(0): This adapter is primary display adapter
(II) SIS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(--) SIS(0): fb0: SiS kernel fb driver (sisfb) 1.5.11 detected (PCI: 01:00.0)
(--) SIS(0): sisfb: memory heap starts at 12288KB
(--) SIS(0): sisfb: using video mode 0x30
(--) SIS(0): sisfb: reserved hardware cursor, using SiS300 series Turbo command queue
(--) SIS(0): Relocated IO registers at 0xD000
(**) SIS(0): Depth 24, (--) framebuffer bpp 32
(==) SIS(0): RGB weight 888
(==) SIS(0): Default visual is TrueColor
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(**) SIS(0): Option "MaxXFBMem" "12288"
(==) SIS(0): Using HW cursor
(==) SIS(0): PCI retry enabled
(==) SIS(0): TurboQueue enabled
(**) SIS(0): MaxXFBMem: Framebuffer memory shall be limited to 12288 KB
(==) SIS(0): Usage of built-in modes is enabled
(--) SIS(0): Video ROM data usage is enabled
(--) SIS(0): Detected DRAM type: SDRAM
(--) SIS(0): Detected memory clock: 100.226 MHz
(--) SIS(0): (Adapter assumes MCLK being 100 Mhz)
(--) SIS(0): Detected DRAM bus width: 64 bit
(--) SIS(0): Global linear framebuffer at 0xD0000000
(--) SIS(0): MMIO registers at 0xDC000000
(--) SIS(0): VideoRAM: 32768 KB
(II) SIS(0): Using 12288K of framebuffer memory
(--) SIS(0): Chipset supports two video overlays
(--) SIS(0): Memory bandwidth at 32 bpp is 200.452 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(--) SIS(0): CRT1 DDC supported
(--) SIS(0): CRT1 DDC level: 2 (--) SIS(0): DDC monitor info:
(II) SIS(0): Manufacturer: GSM Model: 3aa8 Serial#: 0
(II) SIS(0): Year: 1997 Week: 19
(II) SIS(0): EDID Version: 1.1
(II) SIS(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) SIS(0): Signal levels configurable
(II) SIS(0): Sync: Separate
(II) SIS(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21
(II) SIS(0): Gamma: 2.12
(II) SIS(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) SIS(0): redX: 0.616 redY: 0.341 greenX: 0.277 greenY: 0.588
(II) SIS(0): blueX: 0.143 blueY: 0.062 whiteX: 0.281 whiteY: 0.312
(II) SIS(0): Supported VESA Video Modes:
(II) SIS(0): 720x400@70Hz
(II) SIS(0): 720x400@88Hz
(II) SIS(0): 640x480@60Hz
(II) SIS(0): 640x480@67Hz
(II) SIS(0): 640x480@72Hz
(II) SIS(0): 640x480@75Hz
(II) SIS(0): 800x600@56Hz
(II) SIS(0): 800x600@60Hz
(II) SIS(0): 800x600@72Hz
(II) SIS(0): 800x600@75Hz
(II) SIS(0): 832x624@75Hz
(II) SIS(0): 1024x768@87Hz (interlaced)
(II) SIS(0): 1024x768@60Hz
(II) SIS(0): 1024x768@70Hz
(II) SIS(0): 1024x768@75Hz
(II) SIS(0): Manufacturer's mask: 0
(II) SIS(0): Supported Future Video Modes:
(II) SIS(0): #0: hsize: 720 vsize 540 refresh: 70 vid: 19003
(II) SIS(0): #1: hsize: 640 vsize 480 refresh: 60 vid: 16433
(II) SIS(0): #2: hsize: 640 vsize 480 refresh: 75 vid: 20273
(II) SIS(0): #3: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) SIS(0): #4: hsize: 1024 vsize 768 refresh: 70 vid: 19041
(II) SIS(0): #5: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) SIS(0): Supported additional Video Mode:
(II) SIS(0): clock: 25.2 MHz Image Size: 260 x 190 mm
(II) SIS(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
(II) SIS(0): v_active: 480 v_sync: 490 v_sync_end 492 v_blanking: 525 v_border: 0
(II) SIS(0): Supported additional Video Mode:
(II) SIS(0): clock: 49.5 MHz Image Size: 260 x 190 mm
(II) SIS(0): h_active: 800 h_sync: 816 h_sync_end 896 h_blank_end 1056 h_border: 0
(II) SIS(0): v_active: 600 v_sync: 601 v_sync_end 604 v_blanking: 625 v_border: 0
(II) SIS(0): Supported additional Video Mode:
(II) SIS(0): clock: 75.0 MHz Image Size: 260 x 190 mm
(II) SIS(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1328 h_border: 0
(II) SIS(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) SIS(0): Supported additional Video Mode:
(II) SIS(0): clock: 108.0 MHz Image Size: 260 x 190 mm
(II) SIS(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) SIS(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(--) SIS(0): End of DDC monitor info
(==) SIS(0): Min pixel clock is 12 MHz
(--) SIS(0): Max pixel clock is 139 MHz
(II) SIS(0): Replaced default mode list with built-in modes
(II) SIS(0): monitor1: Using hsync range of 30.00-65.00 kHz
(II) SIS(0): monitor1: Using vrefresh range of 50.00-120.00 Hz
(II) SIS(0): Clock range: 12.00 to 139.09 MHz
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1280x960" (hsync out of range)
(II) SIS(0): Not using default mode "1280x960" (hsync out of range)
(II) SIS(0): Not using default mode "1024x576" (hsync out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x720" (bad mode clock/interlace/doublescan)
(--) SIS(0): Virtual size is 1024x768 (pitch 1024)
(**) SIS(0): Default mode "1024x768": 78.7 MHz, 60.0 kHz, 75.0 Hz
(II) SIS(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 796 799 800 +hsync +vsync
(**) SIS(0): Default mode "800x600": 56.2 MHz, 53.7 kHz, 85.1 Hz
(II) SIS(0): Modeline "800x600" 56.25 800 832 896 1048 600 627 630 631 +hsync +vsync
(**) SIS(0): Default mode "640x480": 44.9 MHz, 54.4 kHz, 105.3 Hz
(II) SIS(0): Modeline "640x480" 44.86 640 664 728 824 480 509 512 517 -hsync -vsync
(--) SIS(0): Display dimensions: (280, 210) mm
(--) SIS(0): DPI set to (92, 92)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) SIS(0): Accel enabled
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xdc000000 - 0xdc01ffff (0x20000) MX[B]
[1] 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xdc100000 - 0xdc100fff (0x1000) MX[B]
[8] -1 0xdc102000 - 0xdc102fff (0x1000) MX[B]
[9] -1 0xdc101000 - 0xdc101fff (0x1000) MX[B]
[10] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B]
[11] -1 0xdc000000 - 0xdc01ffff (0x20000) MX[B](B)
[12] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[13] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[14] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[15] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[16] 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[17] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[20] -1 0x00004000 - 0x0000400f (0x10) IX[B]
[21] -1 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
[22] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[23] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) SIS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0xcc80
(==) SIS(0): Write-combining range (0xd0000000,0x2000000)
(II) SIS(0): VBFlags=0x20080000
(--) SIS(0): Before: CR30=0x00, CR31=0x60, CR32=0x20, CR33=0x02
(II) SIS(0): After: CR30=0x00, CR31=0x64, CR33=0x04
(II) SIS(0): Setting mode 0x64
(--) SIS(0): (init: VBType=0x0000, VBInfo=0x0000)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) SIS(0): [drm] loaded kernel module for "sis" driver
(II) SIS(0): [drm] created "sis" driver at busid "PCI:1:0:0"
(II) SIS(0): [drm] added 8192 byte SAREA at 0xc88dd000
(II) SIS(0): [drm] mapped SAREA 0xc88dd000 to 0x40012000
(II) SIS(0): [drm] framebuffer handle = 0xd0000000
(II) SIS(0): [drm] added 1 reserved context for kernel
(II) SIS(0): [drm] Registers = 0xdc000000
(II) SIS(0): [drm] drmAgpEnabled succeeded
(II) SIS(0): [drm] failure adding irq 0 handler, stereo disabled
(II) SIS(0): [dri] visual configs initialized.
(II) SIS(0): Frame Buffer From (0,0) To (1024,3070)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
10 256x256 slots
4 512x512 slots
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(**) Option "dpms"
(**) SIS(0): DPMS enabled
(II) SIS(0): Using SiS300/310/325 series HW Xv
(II) SIS(0): X context handle = 0x00000001
(II) SIS(0): [drm] installed DRM signal handler
(II) SIS(0): [DRI] installation complete
(II) SIS(0): Direct rendering enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Keyboard "Keyboard1" handled by legacy driver
(**) Option "Protocol" "PS/2"
(**) Mouse1: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons"
(**) Option "Emulate3Timeout" "50"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Open APM successful
(II) SIS(0): VBFlags=0x20080000
(--) SIS(0): Before: CR30=0x00, CR31=0x60, CR32=0x20, CR33=0x02
(II) SIS(0): After: CR30=0x00, CR31=0x64, CR33=0x04
(II) SIS(0): Setting mode 0x64
(--) SIS(0): (init: VBType=0x0000, VBInfo=0x0000)
_______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
