Hi, I want to build a basic image for the Avionic Tamonten board using Yocto. SO, I created a skidata-tamonten.conf in the list of machines based on the beagleboard.conf but I dont know what to add for the UBOOT_MACHINE= . I tried my best to use the same "omap_beagle_conf" but it doesnot boot properly. Here is the skidata-tamonten.conf file description
#@TYPE: Machine #@NAME: skidata-tamonten machine #@DESCRIPTION: Machine configuration for the Tamonten board PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" XSERVER ?= "xserver-xorg \ xf86-input-evdev \ xf86-input-mouse \ xf86-video-omapfb \ xf86-input-keyboard" # Ship all kernel modules by default MACHINE_EXTRA_RRECOMMENDS = " kernel-modules" # Allow for MMC booting () EXTRA_IMAGEDEPENDS += "u-boot" # Uncomment the following line to enable the hard floating point abi. Note that # this breaks some binary libraries and 3D (neither of which ship with # meta-yocto). For maximum compatibility, leave this disabled. DEFAULTTUNE ?= "cortexa9thf" include conf/machine/include/tune-cortexa9.inc IMAGE_FSTYPES += "tar.bz2 ext2 ext3" SERIAL_CONSOLE = "115200 ttyO2" PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" PREFERRED_VERSION_linux-yocto ?= "3.2%" KERNEL_IMAGETYPE = "uImage" PREFERRED_VERSION_u-boot ?= "v2012.04%" UBOOT_MACHINE = "???????????????????" UBOOT_ENTRYPOINT = "0x00008000" UBOOT_LOADADDRESS = "0x00008000" MACHINE_FEATURES = "usbgadget usbhost vfat alsa screen touchscreen keyboard" Greetings & Regards, Swaroop
_______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto