On 2013-02-19 09:02, Satya Swaroop Damarla wrote:
Unfortunately "tec_config" didnot work. Here is the error message
I think you need a newer U-Boot to get the support for this board. Try PREFERRED_VERSION_u-boot ?= "v2012.10%" or even PREFERRED_VERSION_u-boot ?= "v2013.01%"
Log data follows: | DEBUG: Executing shell function do_compile | NOTE: make -j 8 CROSS_COMPILE=arm-poky-linux-gnueabi- CC=arm-poky-linux-gnueabi-gcc --sysroot=/home/build/yocto/poky/buildTamonten/tmp/sysroots/skidata-tamonten tec_config | make: *** No rule to make target `tec_config'. Stop. | make: *** [tec_config] Error 1 | ERROR: oe_runmake failed | ERROR: Function failed: do_compile (see /home/build/yocto/poky/buildTamonten/tmp/work/skidata_tamonten-poky-linux-gnueabi/u-boot-v2012.04.01+git3+415d386877df49eb051b85ef74fa59a16dc17c7d-r2/temp/log.do_compile.21665 for further information) ERROR: Task 69 (/home/build/yocto/poky/meta/recipes-bsp/u-boot/u-boot_2012.04.01.bb <http://u-boot_2012.04.01.bb>, do_compile) failed with exit code '1' NOTE: Tasks Summary: Attempted 3421 tasks of which 319 didn't need to be rerun and 1 failed. On Tue, Feb 19, 2013 at 3:58 PM, Gary Thomas <g...@mlbassoc.com <mailto:g...@mlbassoc.com>> wrote: On 2013-02-19 06:28, Satya Swaroop Damarla wrote: Hi, I want to build a basic image for the Avionic Tamonten board using Yocto. SO, I created a skidata-tamonten.conf in the list of machines based on the beagleboard.conf but I dont know what to add for the UBOOT_MACHINE= . I tried my best to use the same "omap_beagle_conf" but it doesnot boot properly. Here is the skidata-tamonten.conf file description Try 'tec_config' #@TYPE: Machine #@NAME: skidata-tamonten machine #@DESCRIPTION: Machine configuration for the Tamonten board PREFERRED_PROVIDER_virtual/__xserver ?= "xserver-xorg" XSERVER ?= "xserver-xorg \ xf86-input-evdev \ xf86-input-mouse \ xf86-video-omapfb \ xf86-input-keyboard" # Ship all kernel modules by default MACHINE_EXTRA_RRECOMMENDS = " kernel-modules" # Allow for MMC booting () EXTRA_IMAGEDEPENDS += "u-boot" # Uncomment the following line to enable the hard floating point abi. Note that # this breaks some binary libraries and 3D (neither of which ship with # meta-yocto). For maximum compatibility, leave this disabled. DEFAULTTUNE ?= "cortexa9thf" include conf/machine/include/tune-__cortexa9.inc IMAGE_FSTYPES += "tar.bz2 ext2 ext3" SERIAL_CONSOLE = "115200 ttyO2" PREFERRED_PROVIDER_virtual/__kernel ?= "linux-yocto" PREFERRED_VERSION_linux-yocto ?= "3.2%" KERNEL_IMAGETYPE = "uImage" PREFERRED_VERSION_u-boot ?= "v2012.04%" UBOOT_MACHINE = "???????????????????" UBOOT_ENTRYPOINT = "0x00008000" UBOOT_LOADADDRESS = "0x00008000" MACHINE_FEATURES = "usbgadget usbhost vfat alsa screen touchscreen keyboard" Greetings & Regards, Swaroop _________________________________________________ yocto mailing list yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> https://lists.yoctoproject.__org/listinfo/yocto <https://lists.yoctoproject.org/listinfo/yocto> -- ------------------------------__------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------__------------------------------ _________________________________________________ yocto mailing list yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> https://lists.yoctoproject.__org/listinfo/yocto <https://lists.yoctoproject.org/listinfo/yocto>
-- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
