On 2013-02-20 00:21, Satya Swaroop Damarla wrote:
Hi Gary,
I think you are right that we need may be the new uboot version but it is not
available in the uboot directory of the poky and i get the follwoing warning
and the simulation is
ending like previously....
NOTE: Resolving any missing task queue dependencies
NOTE: preferred version v2013.01% of u-boot not available (for item u-boot)
NOTE: versions of u-boot available:
v2011.03+git26+19b54a701811220221fc4d5089a2bb18892018ca
v2011.06+git27+b1af6f532e0d348b153d5c148369229d24af361a
v2012.04.01+git25+415d386877df49eb051b85ef74fa59a16dc17c7d
NOTE: preferred version v2013.01% of u-boot not available (for item u-boot)
NOTE: versions of u-boot available:
v2011.03+git26+19b54a701811220221fc4d5089a2bb18892018ca
v2011.06+git27+b1af6f532e0d348b153d5c148369229d24af361a
v2012.04.01+git25+415d386877df49eb051b85ef74fa59a16dc17c7d
NOTE: preferred version v2013.01% of u-boot not available (for item u-boot-dev)
NOTE: versions of u-boot available:
v2011.03+git26+19b54a701811220221fc4d5089a2bb18892018ca
v2011.06+git27+b1af6f532e0d348b153d5c148369229d24af361a
v2012.04.01+git25+415d386877df49eb051b85ef74fa59a16dc17c7d
May be you can tell me how to add the new uboot file
The easiest way is to just add the meta-ti layer - they have
a recipe for 2013.01.
n.b. It's common courtesy to keep such discussions on the mailing list so
that everyone benefits from the answers.
On Tue, Feb 19, 2013 at 7:36 PM, Gary Thomas <g...@mlbassoc.com
<mailto:g...@mlbassoc.com>> wrote:
On 2013-02-19 09:02, Satya Swaroop Damarla wrote:
Unfortunately "tec_config" didnot work. Here is the error message
I think you need a newer U-Boot to get the support for this board.
Try
PREFERRED_VERSION_u-boot ?= "v2012.10%"
or even
PREFERRED_VERSION_u-boot ?= "v2013.01%"
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 8 CROSS_COMPILE=arm-poky-linux-__gnueabi-
CC=arm-poky-linux-gnueabi-gcc
--sysroot=/home/build/yocto/__poky/buildTamonten/tmp/__sysroots/skidata-tamonten
tec_config
| make: *** No rule to make target `tec_config'. Stop.
| make: *** [tec_config] Error 1
| ERROR: oe_runmake failed
| ERROR: Function failed: do_compile (see
/home/build/yocto/poky/__buildTamonten/tmp/work/__skidata_tamonten-poky-linux-__gnueabi/u-boot-v2012.04.01+__git3+__415d386877df49eb051b85ef74fa59__a16dc17c7d-r2/temp/log.do___compile.21665
for
further information)
ERROR: Task 69
(/home/build/yocto/poky/meta/__recipes-bsp/u-boot/u-boot___2012.04.01.bb
<http://u-boot_2012.04.01.bb> <http://u-boot_2012.04.01.bb>, do_compile) failed
with
exit code '1'
NOTE: Tasks Summary: Attempted 3421 tasks of which 319 didn't need to
be rerun and 1 failed.
On Tue, Feb 19, 2013 at 3:58 PM, Gary Thomas <g...@mlbassoc.com
<mailto:g...@mlbassoc.com> <mailto:g...@mlbassoc.com <mailto:g...@mlbassoc.com>>>
wrote:
On 2013-02-19 06:28, Satya Swaroop Damarla wrote:
Hi,
I want to build a basic image for the Avionic Tamonten board
using Yocto. SO, I created a skidata-tamonten.conf in the list of machines
based on the
beagleboard.conf but I dont
know what to add for the UBOOT_MACHINE= . I tried my best to use the
same "omap_beagle_conf" but it doesnot boot properly. Here is the
skidata-tamonten.conf file
description
Try 'tec_config'
#@TYPE: Machine
#@NAME: skidata-tamonten machine
#@DESCRIPTION: Machine configuration for the Tamonten board
PREFERRED_PROVIDER_virtual/____xserver ?= "xserver-xorg"
XSERVER ?= "xserver-xorg \
xf86-input-evdev \
xf86-input-mouse \
xf86-video-omapfb \
xf86-input-keyboard"
# Ship all kernel modules by default
MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
# Allow for MMC booting ()
EXTRA_IMAGEDEPENDS += "u-boot"
# Uncomment the following line to enable the hard floating
point abi. Note that
# this breaks some binary libraries and 3D (neither of which
ship with
# meta-yocto). For maximum compatibility, leave this disabled.
DEFAULTTUNE ?= "cortexa9thf"
include conf/machine/include/tune-____cortexa9.inc
IMAGE_FSTYPES += "tar.bz2 ext2 ext3"
SERIAL_CONSOLE = "115200 ttyO2"
PREFERRED_PROVIDER_virtual/____kernel ?= "linux-yocto"
PREFERRED_VERSION_linux-yocto ?= "3.2%"
KERNEL_IMAGETYPE = "uImage"
PREFERRED_VERSION_u-boot ?= "v2012.04%"
UBOOT_MACHINE = "???????????????????"
UBOOT_ENTRYPOINT = "0x00008000"
UBOOT_LOADADDRESS = "0x00008000"
MACHINE_FEATURES = "usbgadget usbhost vfat alsa screen touchscreen
keyboard"
Greetings & Regards,
Swaroop
___________________________________________________
yocto mailing list
yocto@yoctoproject.org <mailto:yocto@yoctoproject.org>
<mailto:yocto@yoctoproject.org <mailto:yocto@yoctoproject.org>__>
https://lists.yoctoproject.____org/listinfo/yocto
<https://lists.yoctoproject.__org/listinfo/yocto
<https://lists.yoctoproject.org/listinfo/yocto>>
--
------------------------------____----------------------------__--
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------____----------------------------__--
___________________________________________________
yocto mailing list
yocto@yoctoproject.org <mailto:yocto@yoctoproject.org>
<mailto:yocto@yoctoproject.org <mailto:yocto@yoctoproject.org>__>
https://lists.yoctoproject.____org/listinfo/yocto
<https://lists.yoctoproject.__org/listinfo/yocto
<https://lists.yoctoproject.org/listinfo/yocto>>
--
------------------------------__------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------__------------------------------
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto