Hi Jessica & Philip, I have an issue... This is such a long error ... I even did a fresh build by deleting the "tmp" directory. The image build went very well but the toolchain is always giving me a error...
*| Selecting previously unselected package xz-dev.* *| Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ...* *| The following package disappeared from your system as* *| all files have been overwritten by other packages:* *| avahi* *| log_check: Using /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066 as logfile* *| Logfile is clean* *| Installing NATIVESDK packages* *| Ign file: ./ InRelease* *| Ign file: ./ InRelease* *| Ign file: ./ Release.gpg* *| Ign file: ./ Release.gpg* *| Get:1 file: ./ Release [24 B]* *| Get:2 file: ./ Release [11 B]* *| Ign file: ./ Translation-en* *| Ign file: ./ Translation-en* *| Reading package lists...* *| W: Ignoring Provides line with DepCompareOp for package nativesdk-pkgconfig__pkg-config__* *| W: You may want to run apt-get update to correct these problems* *| Reading package lists...* *| Building dependency tree...* *| Reading state information...* *| Some packages could not be installed. This may mean that you have* *| requested an impossible situation or if you are using the unstable* *| distribution that some required packages have not yet been created* *| or been moved out of Incoming.* *| The following information may help to resolve the situation:* *| * *| The following packages have unmet dependencies:* *| packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm but it is not installable* *| Depends: gcc-cross-canadian-arm but it is not installable* *| Depends: meta-environment-arm but it is not installable* *| Depends: binutils-cross-canadian-arm but it is not installable* *| W: Ignoring Provides line with DepCompareOp for package nativesdk-pkgconfig__pkg-config__* *| W: You may want to run apt-get update to correct these problems* *| E: Unable to correct problems, you have held broken packages.* *| DEBUG: Python function do_populate_sdk finished* *| ERROR: Function failed: populate_sdk_image (see /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066 for further information)* *ERROR: Task 10 (/home/damarla/yocto/poky/meta/recipes-graphics/images/ core-image-skidata.bb, do_populate_sdk) failed with exit code '1'* *NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to be rerun and 1 failed.* * * *Summary: 1 task failed:* * /home/damarla/yocto/poky/meta/recipes-graphics/images/ core-image-skidata.bb, do_populate_sdk* *Summary: There was 1 ERROR message shown, returning a non-zero exit code.* I am not able to install those packages as they say there are no installation candidate for them... On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica <jessica.zh...@intel.com>wrote: > Hi Satya,**** > > ** ** > > Use bitbake image-name –c populate_sdk, this allows you to create a > toolchain with sysroot that match your target image that allows you to > develop app against…**** > > ** ** > > Cheers,**** > > Jessica**** > > ** ** > > *From:* yocto-boun...@yoctoproject.org [mailto: > yocto-boun...@yoctoproject.org] *On Behalf Of *Satya Swaroop Damarla > *Sent:* Wednesday, June 05, 2013 6:05 AM > *To:* yocto@yoctoproject.org > *Subject:* [yocto] Application Development**** > > ** ** > > Hi Guys,**** > > ** ** > > I have an issue... I created a custom image based on NVIDIA Tegra2 with a > custom kernel. I installed packages specific Tegra board and application > specific. Now we want to send the baord and the new linux image for > application development... **** > > ** ** > > As I went through ADT manual, I only found qemu based toolchains but I > want to create toolchain based on my rootfs and kernel... so that the > development team can develop a voip application for the board... I am kind > of stuck how to proceed in this issue...**** > > ** ** > > I really need a small way out and hopefully I will catch things > automatically..**** > > ** ** > > Cheers,**** > > Satya**** >
_______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto