On Fri, Jun 7, 2013 at 4:03 PM, Zhang, Jessica <jessica.zh...@intel.com> wrote: > Yes, you need those packages in your sysroot for cross development. > > Ok. But out of curiosity, why should I need X11 packages for a simple command-line based toolchain? I assume that none of these X11 packages gets copied to my target device rootfs, or?
> > Cheers, > > Jessica > > > > From: satyaswaroop.dama...@gmail.com [mailto:satyaswaroop.dama...@gmail.com] > On Behalf Of DAMARLA Satya Swaroop > Sent: Friday, June 07, 2013 12:10 AM > To: Zhang, Jessica; yocto@yoctoproject.org > Subject: Re: [yocto] Application Development > > > > SHould we install development and debigging pacakages in the images when we > want to build a toolchain.. I mean this > > > > "dbg-pkgs" - add -dbg packages for all installed packages > > # (adds symbol information for debugging/profiling) > > # "dev-pkgs" - add -dev packages for all installed packages > > # (useful if you want to develop against libs in the > image) > > > > > > Greets, > > Satya > > > > On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop > <swaroop.dama...@gmail.com> wrote: > > Hi Jessica & Philip, > > > > I have an issue... This is such a long error ... I even did a fresh build by > deleting the "tmp" directory. The image build went very well but the > toolchain is always giving me a error... > > > > | Selecting previously unselected package xz-dev. > > | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ... > > | The following package disappeared from your system as > > | all files have been overwritten by other packages: > > | avahi > > | log_check: Using > /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066 > as logfile > > | Logfile is clean > > | Installing NATIVESDK packages > > | Ign file: ./ InRelease > > | Ign file: ./ InRelease > > | Ign file: ./ Release.gpg > > | Ign file: ./ Release.gpg > > | Get:1 file: ./ Release [24 B] > > | Get:2 file: ./ Release [11 B] > > | Ign file: ./ Translation-en > > | Ign file: ./ Translation-en > > | Reading package lists... > > | W: Ignoring Provides line with DepCompareOp for package > nativesdk-pkgconfig__pkg-config__ > > | W: You may want to run apt-get update to correct these problems > > | Reading package lists... > > | Building dependency tree... > > | Reading state information... > > | Some packages could not be installed. This may mean that you have > > | requested an impossible situation or if you are using the unstable > > | distribution that some required packages have not yet been created > > | or been moved out of Incoming. > > | The following information may help to resolve the situation: > > | > > | The following packages have unmet dependencies: > > | packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm but it > is not installable > > | Depends: gcc-cross-canadian-arm but it > is not installable > > | Depends: meta-environment-arm but it is > not installable > > | Depends: binutils-cross-canadian-arm > but it is not installable > > | W: Ignoring Provides line with DepCompareOp for package > nativesdk-pkgconfig__pkg-config__ > > | W: You may want to run apt-get update to correct these problems > > | E: Unable to correct problems, you have held broken packages. > > | DEBUG: Python function do_populate_sdk finished > > | ERROR: Function failed: populate_sdk_image (see > /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066 > for further information) > > ERROR: Task 10 > (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb, > do_populate_sdk) failed with exit code '1' > > NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to be > rerun and 1 failed. > > > > Summary: 1 task failed: > > > /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb, > do_populate_sdk > > Summary: There was 1 ERROR message shown, returning a non-zero exit code. > > > > I am not able to install those packages as they say there are no > installation candidate for them... > > > > On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica <jessica.zh...@intel.com> > wrote: > > Hi Satya, > > > > Use bitbake image-name –c populate_sdk, this allows you to create a > toolchain with sysroot that match your target image that allows you to > develop app against… > > > > Cheers, > > Jessica > > > > From: yocto-boun...@yoctoproject.org [mailto:yocto-boun...@yoctoproject.org] > On Behalf Of Satya Swaroop Damarla > Sent: Wednesday, June 05, 2013 6:05 AM > To: yocto@yoctoproject.org > Subject: [yocto] Application Development > > > > Hi Guys, > > > > I have an issue... I created a custom image based on NVIDIA Tegra2 with a > custom kernel. I installed packages specific Tegra board and application > specific. Now we want to send the baord and the new linux image for > application development... > > > > As I went through ADT manual, I only found qemu based toolchains but I want > to create toolchain based on my rootfs and kernel... so that the development > team can develop a voip application for the board... I am kind of stuck how > to proceed in this issue... > > > > I really need a small way out and hopefully I will catch things > automatically.. > > > > Cheers, > > Satya > > > > > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > On Fri, Jun 7, 2013 at 4:03 PM, Zhang, Jessica <jessica.zh...@intel.com> wrote: > Yes, you need those packages in your sysroot for cross development. > > > > Cheers, > > Jessica > > > > From: satyaswaroop.dama...@gmail.com [mailto:satyaswaroop.dama...@gmail.com] > On Behalf Of DAMARLA Satya Swaroop > Sent: Friday, June 07, 2013 12:10 AM > To: Zhang, Jessica; yocto@yoctoproject.org > Subject: Re: [yocto] Application Development > > > > SHould we install development and debigging pacakages in the images when we > want to build a toolchain.. I mean this > > > > "dbg-pkgs" - add -dbg packages for all installed packages > > # (adds symbol information for debugging/profiling) > > # "dev-pkgs" - add -dev packages for all installed packages > > # (useful if you want to develop against libs in the > image) > > > > > > Greets, > > Satya > > > > On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop > <swaroop.dama...@gmail.com> wrote: > > Hi Jessica & Philip, > > > > I have an issue... This is such a long error ... I even did a fresh build by > deleting the "tmp" directory. The image build went very well but the > toolchain is always giving me a error... > > > > | Selecting previously unselected package xz-dev. > > | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ... > > | The following package disappeared from your system as > > | all files have been overwritten by other packages: > > | avahi > > | log_check: Using > /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066 > as logfile > > | Logfile is clean > > | Installing NATIVESDK packages > > | Ign file: ./ InRelease > > | Ign file: ./ InRelease > > | Ign file: ./ Release.gpg > > | Ign file: ./ Release.gpg > > | Get:1 file: ./ Release [24 B] > > | Get:2 file: ./ Release [11 B] > > | Ign file: ./ Translation-en > > | Ign file: ./ Translation-en > > | Reading package lists... > > | W: Ignoring Provides line with DepCompareOp for package > nativesdk-pkgconfig__pkg-config__ > > | W: You may want to run apt-get update to correct these problems > > | Reading package lists... > > | Building dependency tree... > > | Reading state information... > > | Some packages could not be installed. This may mean that you have > > | requested an impossible situation or if you are using the unstable > > | distribution that some required packages have not yet been created > > | or been moved out of Incoming. > > | The following information may help to resolve the situation: > > | > > | The following packages have unmet dependencies: > > | packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm but it > is not installable > > | Depends: gcc-cross-canadian-arm but it > is not installable > > | Depends: meta-environment-arm but it is > not installable > > | Depends: binutils-cross-canadian-arm > but it is not installable > > | W: Ignoring Provides line with DepCompareOp for package > nativesdk-pkgconfig__pkg-config__ > > | W: You may want to run apt-get update to correct these problems > > | E: Unable to correct problems, you have held broken packages. > > | DEBUG: Python function do_populate_sdk finished > > | ERROR: Function failed: populate_sdk_image (see > /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066 > for further information) > > ERROR: Task 10 > (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb, > do_populate_sdk) failed with exit code '1' > > NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to be > rerun and 1 failed. > > > > Summary: 1 task failed: > > > /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb, > do_populate_sdk > > Summary: There was 1 ERROR message shown, returning a non-zero exit code. > > > > I am not able to install those packages as they say there are no > installation candidate for them... > > > > On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica <jessica.zh...@intel.com> > wrote: > > Hi Satya, > > > > Use bitbake image-name –c populate_sdk, this allows you to create a > toolchain with sysroot that match your target image that allows you to > develop app against… > > > > Cheers, > > Jessica > > > > From: yocto-boun...@yoctoproject.org [mailto:yocto-boun...@yoctoproject.org] > On Behalf Of Satya Swaroop Damarla > Sent: Wednesday, June 05, 2013 6:05 AM > To: yocto@yoctoproject.org > Subject: [yocto] Application Development > > > > Hi Guys, > > > > I have an issue... I created a custom image based on NVIDIA Tegra2 with a > custom kernel. I installed packages specific Tegra board and application > specific. Now we want to send the baord and the new linux image for > application development... > > > > As I went through ADT manual, I only found qemu based toolchains but I want > to create toolchain based on my rootfs and kernel... so that the development > team can develop a voip application for the board... I am kind of stuck how > to proceed in this issue... > > > > I really need a small way out and hopefully I will catch things > automatically.. > > > > Cheers, > > Satya > > > > > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto