On Fri, Jun 7, 2013 at 4:21 PM, Zhang, Jessica <jessica.zh...@intel.com> wrote: > When you create your image, what profile did you use. Are you building one > of our existing images, e.g. core-image-minimal, etc. or it's a customized > image and if so, how did you customize your image, via layer or install extra > packages? I think x11 is brought in via some package dependency. You said > you were able to build the image, was the x11 packages there? We're building > a toolchain plus the sysroot that matching the rootfs of your target image > here so it's not just the toolchain that is built. >
Hi Jessica. I am building my own image recipe that basically does: require recipes-core/images/core-image-minimal-mtdutils.bb IMAGE_FEATURES += " ssh-server-dropbear \ " Its a console-only type of image for an embedded device with no graphic support what so ever. Building the the rootfs and booting it up on the device works fine. I have had no X11 dependency until I added tools-sdk to IMAGE_FEATURES as suggested. What I am after is a command-line-only toolchain which will be using the sysroot from my rootfs build. Maybe I am asking for something that is not supported? Hans > -----Original Message----- > From: Hans Beckérus [mailto:hans.becke...@gmail.com] > Sent: Friday, June 07, 2013 7:09 AM > To: Zhang, Jessica > Cc: DAMARLA Satya Swaroop; yocto@yoctoproject.org > Subject: Re: [yocto] Application Development > > On Fri, Jun 7, 2013 at 4:03 PM, Zhang, Jessica <jessica.zh...@intel.com> > wrote: >> Yes, you need those packages in your sysroot for cross development. >> >> > Ok. But out of curiosity, why should I need X11 packages for a simple > command-line based toolchain? > I assume that none of these X11 packages gets copied to my target device > rootfs, or? > >> >> Cheers, >> >> Jessica >> >> >> >> From: satyaswaroop.dama...@gmail.com >> [mailto:satyaswaroop.dama...@gmail.com] >> On Behalf Of DAMARLA Satya Swaroop >> Sent: Friday, June 07, 2013 12:10 AM >> To: Zhang, Jessica; yocto@yoctoproject.org >> Subject: Re: [yocto] Application Development >> >> >> >> SHould we install development and debigging pacakages in the images >> when we want to build a toolchain.. I mean this >> >> >> >> "dbg-pkgs" - add -dbg packages for all installed packages >> >> # (adds symbol information for debugging/profiling) >> >> # "dev-pkgs" - add -dev packages for all installed packages >> >> # (useful if you want to develop against libs in the >> image) >> >> >> >> >> >> Greets, >> >> Satya >> >> >> >> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop >> <swaroop.dama...@gmail.com> wrote: >> >> Hi Jessica & Philip, >> >> >> >> I have an issue... This is such a long error ... I even did a fresh >> build by deleting the "tmp" directory. The image build went very well >> but the toolchain is always giving me a error... >> >> >> >> | Selecting previously unselected package xz-dev. >> >> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ... >> >> | The following package disappeared from your system as >> >> | all files have been overwritten by other packages: >> >> | avahi >> >> | log_check: Using >> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony- >> poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk. >> 4066 >> as logfile >> >> | Logfile is clean >> >> | Installing NATIVESDK packages >> >> | Ign file: ./ InRelease >> >> | Ign file: ./ InRelease >> >> | Ign file: ./ Release.gpg >> >> | Ign file: ./ Release.gpg >> >> | Get:1 file: ./ Release [24 B] >> >> | Get:2 file: ./ Release [11 B] >> >> | Ign file: ./ Translation-en >> >> | Ign file: ./ Translation-en >> >> | Reading package lists... >> >> | W: Ignoring Provides line with DepCompareOp for package >> nativesdk-pkgconfig__pkg-config__ >> >> | W: You may want to run apt-get update to correct these problems >> >> | Reading package lists... >> >> | Building dependency tree... >> >> | Reading state information... >> >> | Some packages could not be installed. This may mean that you have >> >> | requested an impossible situation or if you are using the unstable >> >> | distribution that some required packages have not yet been created >> >> | or been moved out of Incoming. >> >> | The following information may help to resolve the situation: >> >> | >> >> | The following packages have unmet dependencies: >> >> | packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm >> | but it >> is not installable >> >> | Depends: gcc-cross-canadian-arm >> | but it >> is not installable >> >> | Depends: meta-environment-arm but >> | it is >> not installable >> >> | Depends: >> | binutils-cross-canadian-arm >> but it is not installable >> >> | W: Ignoring Provides line with DepCompareOp for package >> nativesdk-pkgconfig__pkg-config__ >> >> | W: You may want to run apt-get update to correct these problems >> >> | E: Unable to correct problems, you have held broken packages. >> >> | DEBUG: Python function do_populate_sdk finished >> >> | ERROR: Function failed: populate_sdk_image (see >> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony- >> poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk. >> 4066 >> for further information) >> >> ERROR: Task 10 >> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skid >> ata.bb, >> do_populate_sdk) failed with exit code '1' >> >> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to >> be rerun and 1 failed. >> >> >> >> Summary: 1 task failed: >> >> >> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skida >> ta.bb, >> do_populate_sdk >> >> Summary: There was 1 ERROR message shown, returning a non-zero exit code. >> >> >> >> I am not able to install those packages as they say there are no >> installation candidate for them... >> >> >> >> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica >> <jessica.zh...@intel.com> >> wrote: >> >> Hi Satya, >> >> >> >> Use bitbake image-name -c populate_sdk, this allows you to create a >> toolchain with sysroot that match your target image that allows you to >> develop app against... >> >> >> >> Cheers, >> >> Jessica >> >> >> >> From: yocto-boun...@yoctoproject.org >> [mailto:yocto-boun...@yoctoproject.org] >> On Behalf Of Satya Swaroop Damarla >> Sent: Wednesday, June 05, 2013 6:05 AM >> To: yocto@yoctoproject.org >> Subject: [yocto] Application Development >> >> >> >> Hi Guys, >> >> >> >> I have an issue... I created a custom image based on NVIDIA Tegra2 >> with a custom kernel. I installed packages specific Tegra board and >> application specific. Now we want to send the baord and the new linux >> image for application development... >> >> >> >> As I went through ADT manual, I only found qemu based toolchains but I >> want to create toolchain based on my rootfs and kernel... so that the >> development team can develop a voip application for the board... I am >> kind of stuck how to proceed in this issue... >> >> >> >> I really need a small way out and hopefully I will catch things >> automatically.. >> >> >> >> Cheers, >> >> Satya >> >> >> >> >> >> >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto >> > > > On Fri, Jun 7, 2013 at 4:03 PM, Zhang, Jessica <jessica.zh...@intel.com> > wrote: >> Yes, you need those packages in your sysroot for cross development. >> >> >> >> Cheers, >> >> Jessica >> >> >> >> From: satyaswaroop.dama...@gmail.com >> [mailto:satyaswaroop.dama...@gmail.com] >> On Behalf Of DAMARLA Satya Swaroop >> Sent: Friday, June 07, 2013 12:10 AM >> To: Zhang, Jessica; yocto@yoctoproject.org >> Subject: Re: [yocto] Application Development >> >> >> >> SHould we install development and debigging pacakages in the images >> when we want to build a toolchain.. I mean this >> >> >> >> "dbg-pkgs" - add -dbg packages for all installed packages >> >> # (adds symbol information for debugging/profiling) >> >> # "dev-pkgs" - add -dev packages for all installed packages >> >> # (useful if you want to develop against libs in the >> image) >> >> >> >> >> >> Greets, >> >> Satya >> >> >> >> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop >> <swaroop.dama...@gmail.com> wrote: >> >> Hi Jessica & Philip, >> >> >> >> I have an issue... This is such a long error ... I even did a fresh >> build by deleting the "tmp" directory. The image build went very well >> but the toolchain is always giving me a error... >> >> >> >> | Selecting previously unselected package xz-dev. >> >> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ... >> >> | The following package disappeared from your system as >> >> | all files have been overwritten by other packages: >> >> | avahi >> >> | log_check: Using >> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony- >> poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk. >> 4066 >> as logfile >> >> | Logfile is clean >> >> | Installing NATIVESDK packages >> >> | Ign file: ./ InRelease >> >> | Ign file: ./ InRelease >> >> | Ign file: ./ Release.gpg >> >> | Ign file: ./ Release.gpg >> >> | Get:1 file: ./ Release [24 B] >> >> | Get:2 file: ./ Release [11 B] >> >> | Ign file: ./ Translation-en >> >> | Ign file: ./ Translation-en >> >> | Reading package lists... >> >> | W: Ignoring Provides line with DepCompareOp for package >> nativesdk-pkgconfig__pkg-config__ >> >> | W: You may want to run apt-get update to correct these problems >> >> | Reading package lists... >> >> | Building dependency tree... >> >> | Reading state information... >> >> | Some packages could not be installed. This may mean that you have >> >> | requested an impossible situation or if you are using the unstable >> >> | distribution that some required packages have not yet been created >> >> | or been moved out of Incoming. >> >> | The following information may help to resolve the situation: >> >> | >> >> | The following packages have unmet dependencies: >> >> | packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm >> | but it >> is not installable >> >> | Depends: gcc-cross-canadian-arm >> | but it >> is not installable >> >> | Depends: meta-environment-arm but >> | it is >> not installable >> >> | Depends: >> | binutils-cross-canadian-arm >> but it is not installable >> >> | W: Ignoring Provides line with DepCompareOp for package >> nativesdk-pkgconfig__pkg-config__ >> >> | W: You may want to run apt-get update to correct these problems >> >> | E: Unable to correct problems, you have held broken packages. >> >> | DEBUG: Python function do_populate_sdk finished >> >> | ERROR: Function failed: populate_sdk_image (see >> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony- >> poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk. >> 4066 >> for further information) >> >> ERROR: Task 10 >> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skid >> ata.bb, >> do_populate_sdk) failed with exit code '1' >> >> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to >> be rerun and 1 failed. >> >> >> >> Summary: 1 task failed: >> >> >> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skida >> ta.bb, >> do_populate_sdk >> >> Summary: There was 1 ERROR message shown, returning a non-zero exit code. >> >> >> >> I am not able to install those packages as they say there are no >> installation candidate for them... >> >> >> >> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica >> <jessica.zh...@intel.com> >> wrote: >> >> Hi Satya, >> >> >> >> Use bitbake image-name -c populate_sdk, this allows you to create a >> toolchain with sysroot that match your target image that allows you to >> develop app against... >> >> >> >> Cheers, >> >> Jessica >> >> >> >> From: yocto-boun...@yoctoproject.org >> [mailto:yocto-boun...@yoctoproject.org] >> On Behalf Of Satya Swaroop Damarla >> Sent: Wednesday, June 05, 2013 6:05 AM >> To: yocto@yoctoproject.org >> Subject: [yocto] Application Development >> >> >> >> Hi Guys, >> >> >> >> I have an issue... I created a custom image based on NVIDIA Tegra2 >> with a custom kernel. I installed packages specific Tegra board and >> application specific. Now we want to send the baord and the new linux >> image for application development... >> >> >> >> As I went through ADT manual, I only found qemu based toolchains but I >> want to create toolchain based on my rootfs and kernel... so that the >> development team can develop a voip application for the board... I am >> kind of stuck how to proceed in this issue... >> >> >> >> I really need a small way out and hopefully I will catch things >> automatically.. >> >> >> >> Cheers, >> >> Satya >> >> >> >> >> >> >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto >> On Fri, Jun 7, 2013 at 4:21 PM, Zhang, Jessica <jessica.zh...@intel.com> wrote: > When you create your image, what profile did you use. Are you building one > of our existing images, e.g. core-image-minimal, etc. or it's a customized > image and if so, how did you customize your image, via layer or install extra > packages? I think x11 is brought in via some package dependency. You said > you were able to build the image, was the x11 packages there? We're building > a toolchain plus the sysroot that matching the rootfs of your target image > here so it's not just the toolchain that is built. > > -----Original Message----- > From: Hans Beckérus [mailto:hans.becke...@gmail.com] > Sent: Friday, June 07, 2013 7:09 AM > To: Zhang, Jessica > Cc: DAMARLA Satya Swaroop; yocto@yoctoproject.org > Subject: Re: [yocto] Application Development > > On Fri, Jun 7, 2013 at 4:03 PM, Zhang, Jessica <jessica.zh...@intel.com> > wrote: >> Yes, you need those packages in your sysroot for cross development. >> >> > Ok. But out of curiosity, why should I need X11 packages for a simple > command-line based toolchain? > I assume that none of these X11 packages gets copied to my target device > rootfs, or? > >> >> Cheers, >> >> Jessica >> >> >> >> From: satyaswaroop.dama...@gmail.com >> [mailto:satyaswaroop.dama...@gmail.com] >> On Behalf Of DAMARLA Satya Swaroop >> Sent: Friday, June 07, 2013 12:10 AM >> To: Zhang, Jessica; yocto@yoctoproject.org >> Subject: Re: [yocto] Application Development >> >> >> >> SHould we install development and debigging pacakages in the images >> when we want to build a toolchain.. I mean this >> >> >> >> "dbg-pkgs" - add -dbg packages for all installed packages >> >> # (adds symbol information for debugging/profiling) >> >> # "dev-pkgs" - add -dev packages for all installed packages >> >> # (useful if you want to develop against libs in the >> image) >> >> >> >> >> >> Greets, >> >> Satya >> >> >> >> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop >> <swaroop.dama...@gmail.com> wrote: >> >> Hi Jessica & Philip, >> >> >> >> I have an issue... This is such a long error ... I even did a fresh >> build by deleting the "tmp" directory. The image build went very well >> but the toolchain is always giving me a error... >> >> >> >> | Selecting previously unselected package xz-dev. >> >> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ... >> >> | The following package disappeared from your system as >> >> | all files have been overwritten by other packages: >> >> | avahi >> >> | log_check: Using >> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony- >> poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk. >> 4066 >> as logfile >> >> | Logfile is clean >> >> | Installing NATIVESDK packages >> >> | Ign file: ./ InRelease >> >> | Ign file: ./ InRelease >> >> | Ign file: ./ Release.gpg >> >> | Ign file: ./ Release.gpg >> >> | Get:1 file: ./ Release [24 B] >> >> | Get:2 file: ./ Release [11 B] >> >> | Ign file: ./ Translation-en >> >> | Ign file: ./ Translation-en >> >> | Reading package lists... >> >> | W: Ignoring Provides line with DepCompareOp for package >> nativesdk-pkgconfig__pkg-config__ >> >> | W: You may want to run apt-get update to correct these problems >> >> | Reading package lists... >> >> | Building dependency tree... >> >> | Reading state information... >> >> | Some packages could not be installed. This may mean that you have >> >> | requested an impossible situation or if you are using the unstable >> >> | distribution that some required packages have not yet been created >> >> | or been moved out of Incoming. >> >> | The following information may help to resolve the situation: >> >> | >> >> | The following packages have unmet dependencies: >> >> | packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm >> | but it >> is not installable >> >> | Depends: gcc-cross-canadian-arm >> | but it >> is not installable >> >> | Depends: meta-environment-arm but >> | it is >> not installable >> >> | Depends: >> | binutils-cross-canadian-arm >> but it is not installable >> >> | W: Ignoring Provides line with DepCompareOp for package >> nativesdk-pkgconfig__pkg-config__ >> >> | W: You may want to run apt-get update to correct these problems >> >> | E: Unable to correct problems, you have held broken packages. >> >> | DEBUG: Python function do_populate_sdk finished >> >> | ERROR: Function failed: populate_sdk_image (see >> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony- >> poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk. >> 4066 >> for further information) >> >> ERROR: Task 10 >> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skid >> ata.bb, >> do_populate_sdk) failed with exit code '1' >> >> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to >> be rerun and 1 failed. >> >> >> >> Summary: 1 task failed: >> >> >> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skida >> ta.bb, >> do_populate_sdk >> >> Summary: There was 1 ERROR message shown, returning a non-zero exit code. >> >> >> >> I am not able to install those packages as they say there are no >> installation candidate for them... >> >> >> >> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica >> <jessica.zh...@intel.com> >> wrote: >> >> Hi Satya, >> >> >> >> Use bitbake image-name -c populate_sdk, this allows you to create a >> toolchain with sysroot that match your target image that allows you to >> develop app against... >> >> >> >> Cheers, >> >> Jessica >> >> >> >> From: yocto-boun...@yoctoproject.org >> [mailto:yocto-boun...@yoctoproject.org] >> On Behalf Of Satya Swaroop Damarla >> Sent: Wednesday, June 05, 2013 6:05 AM >> To: yocto@yoctoproject.org >> Subject: [yocto] Application Development >> >> >> >> Hi Guys, >> >> >> >> I have an issue... I created a custom image based on NVIDIA Tegra2 >> with a custom kernel. I installed packages specific Tegra board and >> application specific. Now we want to send the baord and the new linux >> image for application development... >> >> >> >> As I went through ADT manual, I only found qemu based toolchains but I >> want to create toolchain based on my rootfs and kernel... so that the >> development team can develop a voip application for the board... I am >> kind of stuck how to proceed in this issue... >> >> >> >> I really need a small way out and hopefully I will catch things >> automatically.. >> >> >> >> Cheers, >> >> Satya >> >> >> >> >> >> >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto >> > > > On Fri, Jun 7, 2013 at 4:03 PM, Zhang, Jessica <jessica.zh...@intel.com> > wrote: >> Yes, you need those packages in your sysroot for cross development. >> >> >> >> Cheers, >> >> Jessica >> >> >> >> From: satyaswaroop.dama...@gmail.com >> [mailto:satyaswaroop.dama...@gmail.com] >> On Behalf Of DAMARLA Satya Swaroop >> Sent: Friday, June 07, 2013 12:10 AM >> To: Zhang, Jessica; yocto@yoctoproject.org >> Subject: Re: [yocto] Application Development >> >> >> >> SHould we install development and debigging pacakages in the images >> when we want to build a toolchain.. I mean this >> >> >> >> "dbg-pkgs" - add -dbg packages for all installed packages >> >> # (adds symbol information for debugging/profiling) >> >> # "dev-pkgs" - add -dev packages for all installed packages >> >> # (useful if you want to develop against libs in the >> image) >> >> >> >> >> >> Greets, >> >> Satya >> >> >> >> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop >> <swaroop.dama...@gmail.com> wrote: >> >> Hi Jessica & Philip, >> >> >> >> I have an issue... This is such a long error ... I even did a fresh >> build by deleting the "tmp" directory. The image build went very well >> but the toolchain is always giving me a error... >> >> >> >> | Selecting previously unselected package xz-dev. >> >> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ... >> >> | The following package disappeared from your system as >> >> | all files have been overwritten by other packages: >> >> | avahi >> >> | log_check: Using >> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony- >> poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk. >> 4066 >> as logfile >> >> | Logfile is clean >> >> | Installing NATIVESDK packages >> >> | Ign file: ./ InRelease >> >> | Ign file: ./ InRelease >> >> | Ign file: ./ Release.gpg >> >> | Ign file: ./ Release.gpg >> >> | Get:1 file: ./ Release [24 B] >> >> | Get:2 file: ./ Release [11 B] >> >> | Ign file: ./ Translation-en >> >> | Ign file: ./ Translation-en >> >> | Reading package lists... >> >> | W: Ignoring Provides line with DepCompareOp for package >> nativesdk-pkgconfig__pkg-config__ >> >> | W: You may want to run apt-get update to correct these problems >> >> | Reading package lists... >> >> | Building dependency tree... >> >> | Reading state information... >> >> | Some packages could not be installed. This may mean that you have >> >> | requested an impossible situation or if you are using the unstable >> >> | distribution that some required packages have not yet been created >> >> | or been moved out of Incoming. >> >> | The following information may help to resolve the situation: >> >> | >> >> | The following packages have unmet dependencies: >> >> | packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm >> | but it >> is not installable >> >> | Depends: gcc-cross-canadian-arm >> | but it >> is not installable >> >> | Depends: meta-environment-arm but >> | it is >> not installable >> >> | Depends: >> | binutils-cross-canadian-arm >> but it is not installable >> >> | W: Ignoring Provides line with DepCompareOp for package >> nativesdk-pkgconfig__pkg-config__ >> >> | W: You may want to run apt-get update to correct these problems >> >> | E: Unable to correct problems, you have held broken packages. >> >> | DEBUG: Python function do_populate_sdk finished >> >> | ERROR: Function failed: populate_sdk_image (see >> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony- >> poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk. >> 4066 >> for further information) >> >> ERROR: Task 10 >> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skid >> ata.bb, >> do_populate_sdk) failed with exit code '1' >> >> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to >> be rerun and 1 failed. >> >> >> >> Summary: 1 task failed: >> >> >> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skida >> ta.bb, >> do_populate_sdk >> >> Summary: There was 1 ERROR message shown, returning a non-zero exit code. >> >> >> >> I am not able to install those packages as they say there are no >> installation candidate for them... >> >> >> >> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica >> <jessica.zh...@intel.com> >> wrote: >> >> Hi Satya, >> >> >> >> Use bitbake image-name -c populate_sdk, this allows you to create a >> toolchain with sysroot that match your target image that allows you to >> develop app against... >> >> >> >> Cheers, >> >> Jessica >> >> >> >> From: yocto-boun...@yoctoproject.org >> [mailto:yocto-boun...@yoctoproject.org] >> On Behalf Of Satya Swaroop Damarla >> Sent: Wednesday, June 05, 2013 6:05 AM >> To: yocto@yoctoproject.org >> Subject: [yocto] Application Development >> >> >> >> Hi Guys, >> >> >> >> I have an issue... I created a custom image based on NVIDIA Tegra2 >> with a custom kernel. I installed packages specific Tegra board and >> application specific. Now we want to send the baord and the new linux >> image for application development... >> >> >> >> As I went through ADT manual, I only found qemu based toolchains but I >> want to create toolchain based on my rootfs and kernel... so that the >> development team can develop a voip application for the board... I am >> kind of stuck how to proceed in this issue... >> >> >> >> I really need a small way out and hopefully I will catch things >> automatically.. >> >> >> >> Cheers, >> >> Satya >> >> >> >> >> >> >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto >> _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto