adocorp wrote: > When I run 'snmpwalk -v1 -cpublic 10.0.0.1 1.3.6.1.4.1.9600' > > I get all these outputs.. > > . > . > .SNMPv2-SMI::enterprises.9600.1.1.5.1.10.1.48 = Gauge32: 5 > SNMPv2-SMI::enterprises.9600.1.1.5.1.10.1.49 = Gauge32: 54 > SNMPv2-SMI::enterprises.9600.1.1.5.1.10.6.95.84.111.116.97.108 = Gauge32: 59 > SNMPv2-SMI::enterprises.9600.1.1.5.1.11.1.48 = Gauge32: 183 > SNMPv2-SMI::enterprises.9600.1.1.5.1.11.1.49 = Gauge32: 112 > SNMPv2-SMI::enterprises.9600.1.1.5.1.11.6.95.84.111.116.97.108 = Gauge32: 296 > SNMPv2-SMI::enterprises.9600.1.1.6.1.0 = Gauge32: 144281 > > . > . > > But, in the Zenoss UI for this system, it does not show anything besides what > I mentioned above. > > Isn't this suppose to show the perfmon on in the UI?
Are you sure the SNMP service is installed and running on the machine that you are trying to monitor? SNMP Informant basically extends the functionality of the Windows SNMP service. It is not a replacement for it. In addition, are you sure that you have configured and SNMP community string on the machine that you are trying to monitor, and that you are trying to query the proper community string? Are you allowing SNMP connections from your Zenoss machine to the machine that you are trying to monitor? FYI: I've seen it take up to 5 or 10 minutes to populate the Perf tab. -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=20559#20559 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
