Hello gbloice, thanks for your reply.
It concerns two HP-Proliant-Server wich I monitor with the same Template, but local copies, because the OIDs for Processor Load differ. It is the only difference, because I use a general Template with all configuration and then make local copies and only change the OIDs for Processor Load. I several times compare the Templates with my screenshots I make before renew the Templates. They are exact the same. What makes me crazy is the following: Why have it work since Sept. 2008 to stop-drawing-point (19.05.2009)? I didn't touch the Template or the snmp-config of the monitored server at this time-range. Why can I snmpwalk the special data-source-OID and get right value back? Code: [zen...@xxx-xxx-xxx ~]$ snmpwalk -v1 -c xxxxxx xxx.xxx.xxx.xxx .1.3.6.1.4.1.232.6.2.6.8.1.4.0.2 SNMPv2-SMI::enterprises.232.6.2.6.8.1.4.0.2 = INTEGER: 19 Why can I test this data-source (for example 1.3.6.1.4.1.232.6.2.6.8.1.4.0.2 for Ambient Temperature of a HP-ProLiant) against the monitored Server via Web-Gui and get the right value back? Example: Code: Executing command snmpwalk -cxxxx -v1 192.168.120.213 1.3.6.1.4.1.232.6.2.6.8.1.4.0.2 against xxxx.xxxx.xxx.xxx SNMPv2-SMI::enterprises.232.6.2.6.8.1.4.0.2 = INTEGER: 19 DONE in 0 seconds zenperfsnmp.log shows Code: 2009-06-16 16:45:02 INFO zen.zenperfsnmp: ******** Cycle completed ******** 2009-06-16 16:45:02 INFO zen.zenperfsnmp: Sent 1687 OID requests 2009-06-16 16:45:02 INFO zen.zenperfsnmp: Queried 67 devices 2009-06-16 16:45:02 INFO zen.zenperfsnmp: 0 in queue still unqueried 2009-06-16 16:45:02 INFO zen.zenperfsnmp: Successes: 67 Failures: 0 Not reporting: 0 2009-06-16 16:45:02 INFO zen.zenperfsnmp: Waited on 0 queries from previous cycles. 2009-06-16 16:45:02 INFO zen.zenperfsnmp: Successes: 0 Failures: 0 Not reporting: 0 2009-06-16 16:45:02 INFO zen.zenperfsnmp: Cycle lasted 5.53 seconds 2009-06-16 16:45:02 INFO zen.zenperfsnmp: ********************************* 2009-06-16 16:45:02 INFO zen.zenperfsnmp: success:67 fail:0 pending:0 todo:0 On other HP-Proliant-Server with using the same Template the Graph still works. Regards dbuck -------------------- m2f -------------------- Read this topic online here: http://forums.zenoss.com/viewtopic.php?p=35956#35956 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
