2009/6/17 dbuck <[email protected]> > Hello gbloice, > > thanks for invest so much time. I now try the following on the > zenoss-console as user zenoss: > > > Code: > [zen...@xxx-xxx-xxx ~]$ zenperfsnmp run --logseverity=10 > --device=xxxx.xxxxx.xxx --cycle &>./log/zenperfsnmp-xxxx-xxxxx-xxx.log > > > > Then I wait 30min before interrupt. > > The created logfile doesn't show any entry about my five data-sources (five > temperature-sensors in the HPProLiant) for the temperature Graph. It seems > that they aren't anywhere in Zenoss. No errors, nothing else like collecting > data, writing rrd-file, verify threshold etc. in the log. > > All my other data-sources for this device work fine for example > ProcessorLoad wich is defined in the same Template. And they all have > entries shown in the log. > > Strange behaviour. > > I do not know anymore ... > > Regards > > dbuck > > I think this has now just exceeded my level of knowledge as well. It seems that zenoss is just not requesting the OIDs. One final check to confirm that would be to get a Wireshark capture of the snmp traffic to the afflicted server and check what OIDs are being requested.
If zenoss isn't requesting them, then something may be up with the template and config of the device within zenoss such that zenperfsnmp doesn't fetch them. -- Regards, Graham Bloice
_______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
