hello napp-it is just a simple cgi-script
common 3 reasons for error 500: - file permission: just set all files in /napp-it/.. to 777 recursively (rwx for all - napp-it will set them correct at first call) -files must be copied in ascii-mode have you used winscp? ; otherwise you must care about -cgi-bin folder must be allowed to hold executabels is set in apache config file in /etc/apache2/sites/enabled/000-default should be ok per default - missing modules (not a problem in nexenta) please look at apache error log-file at /var/log/apache2/error.log there you will find the reason for this error your nics: i suppose, your other nics are not supported by default you can try to find and install drivers or (better): forget them and buy a intel nic -(about 50 euro, no problem) your hd: if you build a raid 1 or raid-z, the capacity depends on the smallest drive, so your 750 hd is used as 500 gig- gea -- This message posted from opensolaris.org _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss