I ran smbios and for the memory-related section I saw the following: ID SIZE TYPE 64 15 SMB_TYPE_MEMARRAY (physical memory array)
Location: 3 (system board or motherboard) Use: 3 (system memory) ECC: 3 (none) Number of Slots/Sockets: 4 Memory Error Data: Not Supported Max Capacity: 4294967296 bytes ID SIZE TYPE 65 62 SMB_TYPE_MEMDEVICE (memory device) Manufacturer: None Serial Number: None Asset Tag: None Location Tag: DIMM_B1 Part Number: None Physical Memory Array: 64 Memory Error Data: Not Supported Total Width: 72 bits Data Width: 64 bits Size: 1073741824 bytes Form Factor: 9 (DIMM) Set: None Memory Type: 18 (DDR) Flags: 0x0 Speed: 1ns Device Locator: DIMM_B1 Bank Locator: Bank0/1 ... >From this output it appears as if Solaris, via the BIOS I presume, it looks >like my BIOS thinks it doesn't have ECC RAM, even though all the memory >modules are indeed ECC modules. Might be time to check (1) my current BIOS settings, even though I felt sure ECC was enabled in the BIOS already, and (2) check for a newer BIOS update. A pity, as the machine has been rock-solid so far, and I don't like changing stable BIOSes... Here's the start of the SMBIOS output: # smbios ID SIZE TYPE 0 104 SMB_TYPE_BIOS (BIOS information) Vendor: Phoenix Technologies, LTD Version String: ASUS M2N-SLI DELUXE ACPI BIOS Revision 1502 Release Date: 03/31/2008 Address Segment: 0xe000 ROM Size: 524288 bytes Image Size: 131072 bytes Characteristics: 0x7fcb9e80 SMB_BIOSFL_PCI (PCI is supported) SMB_BIOSFL_PLUGNPLAY (Plug and Play is supported) SMB_BIOSFL_APM (APM is supported) SMB_BIOSFL_FLASH (BIOS is Flash Upgradeable) SMB_BIOSFL_SHADOW (BIOS shadowing is allowed) SMB_BIOSFL_CDBOOT (Boot from CD is supported) SMB_BIOSFL_SELBOOT (Selectable Boot supported) SMB_BIOSFL_ROMSOCK (BIOS ROM is socketed) SMB_BIOSFL_EDD (EDD Spec is supported) SMB_BIOSFL_525_360K (int 0x13 5.25" 360K floppy) SMB_BIOSFL_525_12M (int 0x13 5.25" 1.2M floppy) SMB_BIOSFL_35_720K (int 0x13 3.5" 720K floppy) SMB_BIOSFL_35_288M (int 0x13 3.5" 2.88M floppy) SMB_BIOSFL_I5_PRINT (int 0x5 print screen svcs) SMB_BIOSFL_I9_KBD (int 0x9 8042 keyboard svcs) SMB_BIOSFL_I14_SER (int 0x14 serial svcs) SMB_BIOSFL_I17_PRINTER (int 0x17 printer svcs) SMB_BIOSFL_I10_CGA (int 0x10 CGA svcs) Characteristics Extension Byte 1: 0x33 SMB_BIOSXB1_ACPI (ACPI is supported) SMB_BIOSXB1_USBL (USB legacy is supported) SMB_BIOSXB1_LS120 (LS-120 boot is supported) SMB_BIOSXB1_ATZIP (ATAPI ZIP drive boot is supported) Characteristics Extension Byte 2: 0x5 SMB_BIOSXB2_BBOOT (BIOS Boot Specification supported) SMB_BIOSXB2_ETCDIST (Enable Targeted Content Distrib.) Version Number: 0.0 Embedded Ctlr Firmware Version Number: 0.0 Cheers, Simon -- This message posted from opensolaris.org _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss