> I just spoke with a co-worker about doing something about it. > > He says he can design a small in-line "UPS" that will deliver 20-30 > seconds of 3.3V, 5V, and 12V to the SATA power connector for about $50 > in parts. It would be even less if only one voltage was needed. That > should be enough for most any SSD to finish any pending writes. Oh I wasn't kidding when I said I was going to have to try this with my home server. I actually do some circuit board design and this would be an amusing project. All you probably need is 5v- I'll look into it. -- This message posted from opensolaris.org _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
- Re: [zfs-discuss] New SSD options Nicolas Williams
- Re: [zfs-discuss] New SSD options Don
- Re: [zfs-discuss] New SSD options Ragnar Sundblad
- Re: [zfs-discuss] New SSD options Miles Nordin
- Re: [zfs-discuss] New SSD options Bill Sommerfeld
- Re: [zfs-discuss] New SSD options Richard Elling
- Re: [zfs-discuss] New SSD options Don
- Re: [zfs-discuss] New SSD options Brandon High
- Re: [zfs-discuss] New SSD options Don
- Re: [zfs-discuss] New SSD options Ian Collins
- Re: [zfs-discuss] New SSD options Brandon High
- Re: [zfs-discuss] New SSD options Don
- Re: [zfs-discuss] New SSD options Ragnar Sundblad
- Re: [zfs-discuss] New SSD options taemun
- Re: [zfs-discuss] New SSD options Bob Friesenhahn
- Re: [zfs-discuss] New SSD options Haudy Kazemi
- Re: [zfs-discuss] New SSD options Miles Nordin
- Re: [zfs-discuss] New SSD options Ray Van Dolson
- Re: [zfs-discuss] New SSD options Ray Van Dolson