Hi,
I want to replace some slow consumer drives with new edc re4 ones but
when I do a replace it needs to scan the full pool and not only that
disk set (or just the old drive)
Is this normal ? (the speed is always slow in the start so thats not
what I am wondering about, but that it needs to scan all of my 18.7T to
replace one drive)
The disk config:
pool: tank
state: ONLINE
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scan: resilver in progress since Tue Jun 14 10:03:37 2011
16.8G scanned out of 18.7T at 1.52M/s, (scan is slow, no estimated
time)
388M resilvered, 0.09% done
config:
NAME STATE READ WRITE CKSUM
tank ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
c10t14d0 ONLINE 0 0 0
c10t15d0 ONLINE 0 0 0
c10t16d0 ONLINE 0 0 0
c10t17d0 ONLINE 0 0 0
c10t18d0 ONLINE 0 0 0
c10t19d0 ONLINE 0 0 0
c10t20d0 ONLINE 0 0 0
raidz2-1 ONLINE 0 0 0
c10t21d0 ONLINE 0 0 0
replacing-1 ONLINE 0 0 0
c10t35d0 ONLINE 0 0 0
c10t22d0 ONLINE 0 0 0 (resilvering)
c10t23d0 ONLINE 0 0 0
c10t24d0 ONLINE 0 0 0
c10t25d0 ONLINE 0 0 0
c10t26d0 ONLINE 0 0 0
c10t27d0 ONLINE 0 0 0
raidz2-2 ONLINE 0 0 0
c10t28d0 ONLINE 0 0 0
c10t29d0 ONLINE 0 0 0
c10t30d0 ONLINE 0 0 0
c10t31d0 ONLINE 0 0 0
c10t32d0 ONLINE 0 0 0
c10t33d0 ONLINE 0 0 0
c10t34d0 ONLINE 0 0 0
raidz2-3 ONLINE 0 0 0
c10t0d0 ONLINE 0 0 0
c10t1d0 ONLINE 0 0 0
c10t2d0 ONLINE 0 0 0
c10t3d0 ONLINE 0 0 0
c10t4d0 ONLINE 0 0 0
c10t5d0 ONLINE 0 0 0
c10t6d0 ONLINE 0 0 0
raidz2-4 ONLINE 0 0 0
c10t7d0 ONLINE 0 0 0
c10t8d0 ONLINE 0 0 0
c10t9d0 ONLINE 0 0 0
c10t10d0 ONLINE 0 0 0
c10t11d0 ONLINE 0 0 0
c10t12d0 ONLINE 0 0 0
c10t13d0 ONLINE 0 0 0
errors: No known data errors
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
