Are you aware that the software default is MIC IN not LINE IN ? To switch to LINE IN, boot up FL-DIGI , go in to CONFIG, click on Soundcard and change the mixer setting to LINE IN.
Andy. In digitalradio@yahoogroups.com, "Charles Brabham" <[EMAIL PROTECTED]> wrote: > > It all installed OK for me - after a lengthy pause during bootup that I > thought was a frozen up computer. Patience paid off! > > My problem is that the soundcard does not send enough audio to the waterfall > display, only barely flickering the first two "bars" in the waterfall > display color setup. - The tuning scope goes crazy, indicating a station and > copying signals just fine, but the waterfall stays almost completely blank > unless there is a really strong signal, which will barely light up the > second color bar for the waterfall, showing a faint trace... > > I can pull the disk, reboot the machine in Win98 and all my waterfall > programs work just fine... DigiPan, MixW, AltCast, etc.. > > That's the problem with Linux boot disks... - You've got about a 50- 50 > chance that it is going to work on any particular machine. If it doesn't > work, your chances of fixing the problem are like, 'slim or none'. > > Having said that, I recognize that my problem reflects some peculiarity > about my old 400 Mhz Celeron that Puppy Linux cannot deal with. The software > itself works very well, from what I can tell with almost no waterfall data. > > It's kind of like the slots... Keep trying different machines out, and > sooner or later you are going to hit the jackpot. That's what I intend to do > on this end. > > Looking over the NBEMS package, I am very impressed with the entire package, > and I really like 'puppy linux', so much that I switched over from DSL > linux, my former favorite. I think its well worth a little extra effort > because it is a great system. > > http://www.w1hkj.com/emcpup.html > > 73, > Charles Brabham, N5PVL > USPacket >
