OK, this makes more sense. Maybe we should work this out off the reflector and not bother everyone until we find an answer.
Please email me directly at [EMAIL PROTECTED] The first thing to do is run a cable from the earphone jack of the transceiver into the computer mic input and see if there is anything on the waterfall. I've never run into such a problem, so it must be easy to track down. I'll look for your email Skip ----- Original Message ----- From: "Rick" <[EMAIL PROTECTED]> To: <digitalradio@yahoogroups.com> Sent: Thursday, January 03, 2008 6:10 PM Subject: Re: [digitalradio] NBEMS problem > Hi Skip, > > I have not been able to display anything on the waterfall for receive > and no random printing to the screen from noise either. > Same thing with both rigs on receive (I can't TX with the Pro 2 since no > rig control to CI-V). > > Both sound cards were tried for both programs, switching back and forth > and trying all sound card positions including Windows default. > > I have the built in Realtek Sound Card in this emachines computer, and > an add on Creative Soundblaster Live! which is more accurate and I > usually use that card. > > The receive and transmit work fine with Multipsk (no rig control, just > keying the VOX) on either card for TX and RX decoding, but with the > vbdigi there is TX via toggling the Tune button or the T/R button and > the rig seems to transmit quite well and I think with a clean signal > when monitoring on the other rig. > > Having done this kind of set up for many years and knowing of the > pitfalls, I have not had a case where you could transmit OK but could > not display anything on the waterfall unless there was a broken > connection someplace. That does not seem possible since it works fine > with Multipsk for both RX and TX. > > Just to clarify, I am using VOX to key the Kenwood TS-440 via the AFSK > RCA jacks after I re-discovered (have not used this for digital for > many, many years) that it can not be driven adequately via the Line out > from the sound card when using the 13 pin DIN plug. > > 73, > > Rick, KV9U > > > > kh6ty wrote: >> Rick, do you receive PSK31 signals on the waterfall, and do they decode >> properly into text? >> >> Does the 756 Pro 2 do the same with VBdigi? >> >> Do you have more than one soundcard/sound system in the computer? >> >> First we must establish that receive works and then address the transmit >> problem. You can always use VOX for PTT if you use the mic input of the >> transceiver. >> >> Skip KH6TY >> >> >> > > -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.17.13/1207 - Release Date: 1/2/2008 11:29 AM
