Usually shows up (worse) on port channels. Drops are read as a single
binary counter, and are calculated as a delta from the previously read
values. Occasionally the port channel values are offset 2x the previous
values (individual ports versus the channel).
We've been dealing with the network
to the orig.mgz's.
alex
On Fri, Aug 17, 2012 at 11:07 AM, Bruce Fischl
fis...@nmr.mgh.harvard.eduwrote:
Hi Alex
when you say it is in the native anatomical space can you elaborate? How
did you create the mask?
Bruce
On Fri, 17 Aug 2012, Alex Kell wrote:
hi freesurfers,
i'm trying to move a volume
is in the right place (hit the compare
button to flip back and forth).
doug
On 08/17/2012 11:02 AM, Alex Kell wrote:
hi freesurfers,
i'm trying to move a volume from a subject's native anatomical space
to that subject's surface space, and i'm running into some difficulty.
we have binary masks
), then it
will try to read it as a surface and fail. To look at it in tksurfer, load
it as an overlay, eg tksurfer subject lh inflated -overlay surf_name.mgz
doug
On 08/17/2012 02:26 PM, Alex Kell wrote:
hi doug,
i can't visualize it. when i try to use tksurfer (or even mris_info) i
get the following
On 8/9/2012 4:32 AM, Luca Tortiglione wrote:
!
route-map PC_TO_VTC permit 1
match ip address 100
set vrf VTC
I suspect you need to complete your route map... you set vrf VTC for VRF
targeted
traffic, you need another level with set global on the return side.
At least that's what I've done
Hi
I am encountering the same problems, in that I am trying to install
UBUNTU 12.04 on a Sony vaio VPCZ13C5E. But can't get past busybox.
I used boot/repair to try and fix the problem, the diagnostics and a
dscription of my system are at http://paste.ubuntu.com/1126678/
Any help would be
Hi
I am encountering the same problems, in that I am trying to install
UBUNTU 12.04 on a Sony vaio VPCZ13C5E. But can't get past busybox.
I used boot/repair to try and fix the problem, the diagnostics and a
dscription of my system are at http://paste.ubuntu.com/1126678/
Any help would be
On 7/27/2012 5:38 PM, Oliver Garraux wrote:
Preventing duplicate VLAN numbers sounds like it could be better
solved through process changes rather than technical changes. Maybe a
wiki or a spreadsheet, or a single person that's in charge of
assigning new VLAN's.
(Not trying to be
On 7/5/2012 11:11 AM, Peter P Morrissey wrote:
I doubt that Apple has any clue that Educause even exists.
Pete Morrissey
It doesn't show up in Bonjour, and doesn't answer multicast DNS requests, so
no, it
can't possibly exist :)
Jeff
**
Participation and subscription information
On 7/4/2012 2:48 PM, Frank Bulk wrote:
Ok, I'm confused. If you turn the AP's radios off, how do the wireless
clients participate in Airplay?
Most Apple TVs can do wired ethernet, which is a good thing.
Many MacOS/iOS devices they want to use to project to them can not do
wired ethernet.
Public bug reported:
I use a customised configuration for running KDE. In particular, I use
fvwm as the window manager, and disable plasma-desktop by creating my
own plasma-desktop.desktop file in ~/.config/autostart, which is just a
copy of the one in /usr/share/autostart with Hidden=true added
Public bug reported:
I use a customised configuration for running KDE. In particular, I use
fvwm as the window manager, and disable plasma-desktop by creating my
own plasma-desktop.desktop file in ~/.config/autostart, which is just a
copy of the one in /usr/share/autostart with Hidden=true added
On 5/20/2012 10:54 PM, Keegan Holley wrote:
Are you sure? The only release bulletin I could find was from 2010 and
that's the year the EOS'd the non-E chassis.
They dropped the non-Es for the -Es. Now they're dropping the -Es for
the +Es.
6500 non-Es were dropped even earlier (support runs
Just to provide another data point / opinion...
We have 3560, 3560X, 3750, 3750E, 3750X all deployed, typically as CE
routers. We are moving to 3750s to stack for redundancy.
Most are well-behaved with a few exceptions...
Any of the X-series with a microcode update can take 30 minutes or more
On 4/28/2012 4:10 PM, Robert Blayzor wrote:
Well the reality of the 720-3BXL in an IPv4/v6 world is that you get
about 500k IPv4 and half that in IPv6 (IIRC). The l3xl scale license
will get you 1M IPv4 routes and 128K IPv6. Of course you'll lose a lot
of your L2 scale. So if your considering
On 4/26/2012 5:44 PM, Andrew Latham wrote:
Yes its a major problem for the users unknowingly infected. To them
it will look like their Internet connection is down. Expect ISPs to
field lots of support calls.
And what about the millions of users unknowingly infected with
something else ??
AFAIK there is just LAN Base, IP Base, and IP Services now, IPv6 was rolled
into IP
Services.
It was IP Services, 15.0(1).
On 4/26/2012 10:03 AM, Dale W. Carder wrote:
Was this on advanced ip services or a different license set?
Dale
Thus spake Jeff Kell (jeff-k...@utc.edu) on Wed, Apr 25
I've seen this on stacked 3750s when doing anything related to
configurations, it
would hang up hard enough to timeout EIGRP hellos from neighbors (and vice
versa)
causing general havoc everywhere.
The workaround was to include parser config cache interface.
During the hangs if you could get
After playing with a lab switch (3560X) today looking at some IPv6
features, we discovered you can't really do IPv6 VRFs on it.
The vrf definition configuration option doesn't like address-family
at all, so no IPv4/IPv6 bits there.
Is this an under consideration software function, or a
My crash was generated when I started Last.fm.
It had worked flawlessly for several days prior.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/929219
Title:
chromium-browser, gvfsd-http and others
Or http://dilbert.com/strips/comic/1996-09-07/
Jeff
On 4/1/2012 6:51 PM, Nick FitzGerald wrote:
Interweb Re-Engineering Task Force J. Oquendo
Request for Comments 4012012 E-Fensive Security Strategies
Category: Informational
Expires: 2020
Really?
You
An IP-based whitelist is pretty much doomed from the start. Many
vendors use content delivery networks and that is too large and volatile
to chase.
We have had some success in captive portal environments with DNS
manipulation, allowing only certain domains to resolve, and redirecting
everything
Hi Freesurfers,
The selxavg3-sess's help and Freesurfer documentation say
that selxavg3-sess creates a design matrix for each run, fits the glm for
each run, and then combines the runs together to give summary data for the
subject's whole session. Some of the fsfast 5 slides say it uses smart
Hi Freesurfers,
I am using preproc-sess in Freesurfer/Fsfast 5 with per-run motion
correction (these subjects have a lot of between-run motion), and I want to
analyze the volumes in each subject's individual space (I'd prefer native
functional space, but I am happy to do it in each subject's
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 3/3/2012 10:34 AM, valdis.kletni...@vt.edu wrote:
On Sat, 03 Mar 2012 07:04:52 PST, JoeSox said:
Go with 'Technical Support' unless you want to take all sorts of calls
with end users wanting help on operational training issues.
THIS DOES
On 3/3/2012 10:57 AM, Faisal Imtiaz wrote:
Especially if a human answers promptly without a horrible accent...
Jeff
Like a heavy Southern Drawl ?
Oh yeah, y'all :)
The major point was a human answering, at least my home ISP (Charter)
has this unbearable voice response... in annoyingly
On 3/3/2012 11:48 AM, Faisal Imtiaz wrote:
Touche!
Being in South Florida, (heavy Latin Spanish accents) and having
customers in Alabama, Tennessee (Heavy Southern accents) etc, we have
had to Tune our ears as well as our Accents, including carefully
choosing our words...
Yes, it
How about splitting up a heavy stream (10G) into components (1G) to run through
an
inline device and reassemble the pieces back to an aggregate afterward?
TippingPoint makes a core controller box for this but it's pretty hideously
expensive.
Could do it with two 6500s but that's pretty
Has anyone tried to get libunwind building on NetBSD 5.x? I'm not
a NetBSD expert, but find myself trying to get a minimal libunwind
set-up running on it at fairly short order.
Just clearing this up: I've now written my own simple unwinder, which
handles the basic cases well enough for my
Has anyone tried to get libunwind building on NetBSD 5.x? I'm not
a NetBSD expert, but find myself trying to get a minimal libunwind
set-up running on it at fairly short order.
I only need a very minimal build of libunwind, supporting just
local x86 unwinding on unoptimised code. The biggest
,
Alex Kell
Kanwisher Lab Manager
___
Freesurfer mailing list
Freesurfer@nmr.mgh.harvard.edu
https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer
The information in this e-mail is intended only for the person to whom it is
addressed. If you believe
On 2/22/2012 10:07 AM, Fred Mowchan wrote:
Loved the comment on ATK, IPX, Neteui. Like Yogi Berra said this is
like deja vu all over again!
Yes, routing breaks traditional AT, IPX, NetBEUI, etc.
So what clown woke up and said Hey! Let's just multicast it, that's
routable...
Jeff
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 2/22/2012 3:38 PM, Julian Y Koh wrote:
On Wed Feb 22 2012 09:24:46 Central Time, Jeff Kell wrote:
Yes, routing breaks traditional AT, IPX, NetBEUI, etc.
AppleTalk and IPX at least are totally routable protocols. :)
Well, you and I know
On 2/22/2012 9:21 PM, Joel Coehoorn wrote:
I just heard an interesting solution for this. Since AppleTV is
already consumer tech and does not need Internet (their classroom use is
pretty much just AirPlay), the person went out and bought a cheap $30
wireless router off the shelf at Walmart for
On 2/18/2012 4:32 PM, Everett Batey wrote:
facebook.com DNS not found 20120218 2125 UTC
Is there any outage information for DNS for facebook.com / www.facebook.com
?
Oops! Google Chrome could not find www.facebook.com
I have had two reports of can't get to facebook from campus today, not
On 2/18/2012 11:41 PM, Chris Adams wrote:
Dumb terminals are sometimes very smart.
Well, yeah, unless you're ever in one of those spots where you need to
xmodem an IOS image...
(Makes you appreciate those newfangled ones that can mount USB drives ...)
Jeff
On 2/17/2012 12:00 PM, Gary Buhrmaster wrote:
If the TV went on the blink (they all did then), you opened up the
back, looked for fried components, and if one of the resistors was
smoking, you soldered in a replacement. Or you took the tubes down to
the local drugstore and tested them.
Wow...
Direct phone number of a 2nd level TAC that speaks English and doesn't
read from a transcript :)
Lots of good mentions, I might add two...
(1) Snap-on multitool plier (or linesman equivalent), combination
plier/diags/various screwdrivers, etc.
(2) Universal power brick
On the last one above, I
On 2/17/2012 6:32 PM, Aled Morris wrote:
Though wax string is nicer.
http://www.repsole.com/ProductGroup.asp?PGID=254
Or in less static environments, velcro ties, e.g.,
http://www.cabletiesandmore.com/velcro.php
Jeff
On 2/16/2012 8:17 AM, Ray Soucy wrote:
I've found starting off with some history on Ethernet (Maine loves Bob
Metcalfe) becomes a very solid base for understanding; how Ethernet
today is very different; starting with hubs, bridges, collisions, and
those problems, then introducing modern
Or a security vendor, or a security publication... the whole top ten
delivered as ten individual clicks with pay-per-view banner ads on each
page and a bazillion tracker cookies arrgh.
Jeff
On 2/16/2012 5:26 AM, Chris Campbell wrote:
This isn't so much a list of misconceptions
It's not necessarily a network problem, or if it is, it's at layer-8 :)
It creates the expection that everything related will just work
(AppleTV, iChat, printers, projectors, etc), when that is not the case
by design in many areas of our network. And tickets opened wondering
why they don't just
(1) Block all ICMP (obviously some are required for normal operations,
unreachables, pMTU too large/DF set, etc).
(2) Block certain ports (blindly, w/o at least established) taking out
legitimate ephemeral port usage.
(3) Local uRPF is unnecesary (or source spoofing mitigation in general)
(4)
On 2/15/2012 3:09 AM, ar wrote:
I would like to setup a remote access IPSEC/SSL VPN then maps to MPLS
VPN/VRFs.
I'm thinking of using 7206VXR as the concentrator/PE for this.
Remote clients will use cisco/microsoft vpn clients.
Site-to-site vpn will be supported too.
I'm sure there are
Heck, even Klingon made it to the private UTF-8 registry,
http://en.wikipedia.org/wiki/Klingon_writing_systems
:)
Jeff
There used to be the old programming benchmark of how large a program
(in lines, as well as compiled bytes) it took to say Hello, world.
The 21st century benchmark might now well be the size of a Hello,
world e-mail.
Or a web page with a similar statement.
Jeff
On 2/10/2012 6:46 PM, Rich
Quick reality check...
Is the difference in the E-series chassis only in available power? Has nothing
to do
with backplane bandwidth?
Jeff
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
On 2/7/2012 3:00 PM, Nick Hilliard wrote:
Anyway, I don't really have an issue with this - the E chassis has been sold
more or
less exclusively since 2005 or so, so any remaining in deployment will be
well past
their accounting write off time.
Apparently Cisco support of the non-E chassis
import/export require BGP to actually work... or at least I've never had any
success w/o
at least defining the BGP process.
Jeff
On 2/3/2012 9:22 AM, harbor235 wrote:
Take a look into importing routes from one vrf into another using an import
map.
check out a previous thread:
Given the fact that if you have a switch running with such ACL
statements in place (and working), upgrading to 12.2(58) will break them
would seem to be something PSIRT would be interested in (but I received
no response after reporting it).
The bug may be tied to my case :)
Jeff
On 2/2/2012
How large are your wireless subnets? Are you doing any broadcast/multicast
limiting?
You might also check for laptop loops -- anything with wired and wireless
interfaces
with both of them connected at the same time. Just takes one kid with ICS or
Bridging
turned on...
Jeff
**
On 2/1/2012 1:11 PM, Peter P Morrissey wrote:
Sweet! It seems like one challenge would be the devices would constantly be
resetting
every time the bus stops running if you are powered directly off the
alternator? Has
that caused any issues? On top of that it seems like you would be
Trying to break some new ground on ASA 8.4(2) VPN configuration (quite a number
of
changes)
Need to map AD group membership onto a group policy selection.
(1) Previous examples are using the Cisco name IETF-Radius-Class to map into
the
policy name, while 8.4(2) seems to want Group Policy
If the wish list is open again, let me re-state my greatest wish again
(have brought it up several times before...).
Along the lines of the device lists -- whether full or map-specific --
I would dearly love a Top Ten (or you set the number) list of objects
(interfaces) in each of the listed
On 1/20/2012 10:19 AM, Alan Buxey wrote:
;-) there'll also be a deluge of sup720 blades for those people still on sup2
or sup32
from all the sup2t upgraders
Yeah, hopefully VS720s too...
Jeff
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
On 1/18/2012 7:30 PM, Scott Smith wrote:
I've seen many times on this list people discuss the differences
between Cisco, Aruba, and Meru. I know there are pros and cons of
each, but I'm wanting to get feedback from people who have either done
a bake off or at least tested between them, and
Running into this on a 3560X IP Services (context is accepted by everything
else...)
Grote-Uplink(config-ext-nacl)#85 permit tcp any any eq 9100 log
% Ambiguous command: 85 permit tcp any any eq 9100 log
Grote-Uplink(config-ext-nacl)#85 permit tcp any any eq 9100 log ! log
% Ambiguous
On 1/18/2012 10:14 AM, Jeff Kell wrote:
Running into this on a 3560X IP Services (context is accepted by everything
else...)
Grote-Uplink(config-ext-nacl)#85 permit tcp any any eq 9100 log
% Ambiguous command: 85 permit tcp any any eq 9100 log
Grote-Uplink(config-ext-nacl)#85 permit tcp any
192.168.128.74 eq
smtp syslog log log
Corny, but if they're going to botch up a maintenance release like that...
Chuck
-Original Message-
From: cisco-nsp-boun...@puck.nether.net
[mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Jeff Kell
Sent: Wednesday, January 18, 2012 4:47 PM
After checking some software revision data during the holiday break, I
noticed that the 29xx/35xx Catalyst IOS train has jumped 12.2(58)SE up
to 15.0(1)SE.
Is there really a significant difference, or is this just a marketing
numbers game to look more current ?
And if you've already made the
You can insert statics to an L3 interface with a next-hop of a second
router (very kludgy and inefficient, but required for the reason you
discovered).
You can use a FWSM or external box to handle the route [leak].
You can loop a cable between global and the target VRF.
You can do VRF Selection
On 12/29/2011 8:12 PM, Mark Andrews wrote:
Well I'd like to be able to plug in the cable router and the DSL
router at home and have it all just work.
Well, that's not too far removed from the plugged-in laptop with the
wireless still active. Toss-up which one wins default route.
What would
We have had similar requests / queries about this in particular, as well as
other
general wireless server roles for devices (e.g., printers, projectors).
We also suppress multicast/broadcast, and are not equipped for wireless
servers.
I shudder to think if Airplay was default open, just how
On 12/14/2011 3:37 PM, Keegan Holley wrote:
Single mode just has a smaller core size for the smaller beam emitted by
laser vs. LED. it works although I've never done it outside of a lab (MM
is cheaper). As for the distance it theory that should come down to the
optics and your transmit
We setup a new Radiator instance on what we hope to be permanent housing, but
are
having an odd issue.
MacOS doesn't seem to issue EAP accepts, they're going off in left field and
never
returning. Windows works. Or it is just a possible coincidence in our test
cases that
Mac fails / windows
: The EDUCAUSE Wireless Issues Constituent Group Listserv
[WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU] on behalf of Jeff Kell
[jeff-k...@utc.edu]
Sent: Wednesday, December 07, 2011 2:36 PM
To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Subject: [WIRELESS-LAN] Odd issue with Aruba wireless...
Having
On 12/6/2011 12:22 PM, Georgi Guninski wrote:
looks like if a corporation does it, it is business. if a non-incorporated
entity does
it, it is a crime. -- j
Yes, sort ofv like bundling add-on crapware with software downloads... to steal
from the
other ongoing thread...
Java updates bundle
On 12/5/2011 1:57 AM, bbelew wrote:
Anyone happen to have any probes for monitoring Aruba Wireless?
Have a 3400 controller and have been playing with trying to monitor it
through IM but have failed thus far.
We have an abbreviated probe that charts the number of mac-authenticated and
Is it possible to run an RSPAN vlan through (not an endpoint, just
transport) an intermediate switch (specifically Foundry/Brocade FCX switch)?
I would suspect that mac address learning on the switch would
interfere with RSPAN, and I can't find a Brocade equivalent of the
mac-learn interface
On 11/22/2011 5:15 PM, Peter Rathlev wrote:
On Tue, 2011-11-22 at 12:59 -0700, Dave wrote:
I was wondering if anyone has used the 3560X-48T switches and would be
kind enough to give me the good/bad/ugly on them ?
We have a couple of WS-C3560X-48T-Ls in use. They seem to function just
as well
On 11/14/2011 4:21 PM, Rubens Kuhl wrote:
For the common good it doesn't matter if the NAT is good guys are
right or the NAT is useless guys are right, as they both fail to
decrease the numbers of their opposing parts. We must get IPv6 done
for both of them.
Hehehe... depending on your ISPs
On 11/13/2011 4:27 PM, Phil Regnauld wrote:
That's not exactly correct. NAT doesn't imply firewalling/filtering.
To illustrate this to customers, I've mounted attacks/scans on hosts
behind NAT devices, from the interconnect network immediately outside:
if you can point a route with the ext ip
On 11/10/2011 8:24 PM, Harry Rauch wrote:
We have in our internet docs for students that rogue wireless devices
that interferes with the dorm's internet usage will be requested to
shutdown or the student will lose internet rights for 30 days.
Students seem to be more than willing to shut off
On 11/2/2011 9:58 PM, Jeff Wheeler wrote:
I guess ten years of watching RIRs and users de-bogon new /8s didn't
teach you why those Cymru examples are more dangerous than they are good.
If you follow all the CYMRU examples and subscribe to the BGP bogon
feed, that isn't an issue...
Jeff
On 11/1/2011 7:05 PM, Stefan Fouant wrote:
Is there anything perhaps protecting or intercepting the data on its way to
the server, perhaps an Arbor device of some type of load balancer?
This type of behavior is quite common when protecting web assets to eliminate
zombies and such, but its
On 10/28/2011 9:58 AM, Christina Klam wrote:
Funny that you mention the issues with the HTC… I have spent the last two
days trying
to figure out why some Droid phones/tablets can get a DHCP address and others
cannot.
Moreover, if they do get an IP address, some lose their IP address after
On 10/27/2011 9:49 PM, Mike King wrote:
Not exactly too surprising. I've have a few enterprising students
broadcasting some stuff from there dorm rooms via multicast (Wired for
us). I can imagine if it worked, they'd use it.
Yes, then there is that wonderful Dropbox LAN Sync broadcast
On 10/26/2011 10:57 PM, Scott Howard wrote:
On Tue, Oct 25, 2011 at 2:51 AM, Aftab Siddiqui
aftab.siddi...@gmail.comwrote:
Blocking port/25 is a common practice (!= best practice) for home
users/consumers because it makes life a bit simpler in educating the end
user.
And it's not just 25.
On 10/12/2011 8:56 AM, Jeffrey G. Fitzwater wrote:
Does anybody know that absolute answer, if a 3750X can or cannot stack with a
3750 or 3750E ?
A 3750X LAN Base image cannot stack with anything (other than another
3750X LAN Base image switch).
A 3750X IP Base or IP Services will stack with
I have been running standard VPN client profiles for VPN access for quite a few
years,
on PIX and now on ASA. I'm working on our next generation prototype now, and
the number
of VPN groups are growing a bit out of hand.
Up to this point we have been distributing groups/roles by providing a
We use Alvarado scanners, tied in with 3rd-party ticketing (NeuLion I
think...). They
run on a non-broadcast SSID with mac authentication over our Aruba
infrastructure
(special AP groups carrying the SSID).
Jeff
**
Participation and subscription information for this EDUCAUSE
We have a few 2960Cs as well as 3560Cs. They are almost cool, except...
-- there's no PoE 2960C
-- and the 3560C is IPBase only
Jeff
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at
On 9/20/2011 11:52 AM, David Gillett wrote:
We'll be replacing our switches over the next 6-18 months, and I'm hoping
the new
ones may include this capability.
Just be a bit cautious... our city buses offer free WiFi on board. We were
deauth-ing
/ dropping users on the buses when they
Here's a *very* belated follow-up... apologies and more.
I'd say if there are *any* audio tracks, it's worth doing a CDDB
lookup. Sometimes the order is reversed, e.g. game CDs that have a
red-book audio soundtrack after the track with the game data.
Sometimes there are even multiple data
On 9/8/2011 4:01 PM, valdis.kletni...@vt.edu wrote:
Anybody want to guess what Sony's coffee/itsec ratio was?
Black-hat or White-hat? It took some nontrivial effort to create the
now infamous Sony rootkit...
Jeff
___
Fun and Misc security discussion
On 9/6/2011 12:03 PM, Dave Weis wrote:
Does anyone have a suggestion on how to implement VRF selection based on
incoming IP on a 7200?
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/vrfselec.html
This is listed as only being supported on the 12000 series.
I don't know about the
On 9/6/2011 8:09 PM, Chris Evans wrote:
Checked the 5585 limits? It's supposed to blow a 5580 out of the water...
On paper.
I don't think anyone has mentioned it yet, but there is also ASA VPN
Load Balancing clusters. You can combine a number of boxes together,
configure the cluster
On 8/22/2011 7:31 PM, Hurt,Trenton William wrote:
We have recently deployed wireless in all are residence halls and are
in the process of completing a ubiquitous wireless deployment across
our entire campus. We currently use public ips for the wireless
address space to serve client devices.
On 8/12/2011 8:29 PM, valdis.kletni...@vt.edu wrote:
So what's in NANOGers home networks/compute centers? :)
Surprisingly minimalistic - a Linksys cablemodem and a Belkin Play wireless
router, both from Best Buy, a Dell Latitude laptop from work, and a PS/3.
(I used to have more gear, but it
We are in the midst of testing a setup portal for admission to our dot1X
SSID. It is
a typical portal setup, with a captive DNS that points the web browser at the
portal web
page, with explanations of how to connect and items to download (evaluating
XpressConnect now for this).
It works fine
On 8/5/2011 8:53 PM, Brielle wrote:
Until they start MitM the ssl traffic, fake certs and all. Didn't a certain
repressive regime already do this tactic with facebook or some other major
site?
Marketscore did (via installing root certs in the victim's machines),
and as far as I know, still
On 7/29/2011 6:34 PM, James J J Hooper wrote:
On 29/07/2011 20:35, Hanset, Philippe C wrote:
Also, if you don't mind the initial investment (will save you money
in the
long run)... get Xpressconnect
... or SU1X (free, but Windows only):
http://sourceforge.net/projects/su1x/
and you can
On 7/28/2011 10:28 PM, Dave Paris wrote:
On Thu, Jul 28, 2011 at 7:17 PM, Jeffrey Walton noloa...@gmail.com wrote:
http://money.cnn.com/2011/07/28/technology/government_hackers/
(This is part four of a week-long series on the ecosystem of cybercrime)
On April 8, 2010, traffic to about 15% of
On 7/27/2011 4:52 PM, Scott Granados wrote:
How does this differ from what Foundry did? :) The CLI in the fast
iron or
server iron gear for example is pretty damn similar. The router bgp
commands were absolutely the same and the only difference was the way
that
foundry named interfaces.
Has anyone been able to get a valid, acceptable to Windows out-of-the-box
certificate
for Radiator that allows seamless connections by Windows computers?
I've found bits and pieces, and references to voodoo with the openssl request
and/or
openssl patches to support the extra bits that Windows
Quick question...
Can you have a pool of vlans for an Aruba role? or is pooling restricted to
the
default connection vlan list to the VAP?
Jeff
**
Participation and subscription information for this EDUCAUSE Constituent Group
discussion list can be found at
I have some remote sites running off of ASA 5505s, and an existing VPN cluster
running
8.4(2).
For consistency's sake, I was trying to update the 5505s to 8.4(2) -- had one
on 7.2 and
one on 8.1.
Everything appears to be working on them except management sessions (ssh or
https or
ASDM), they
On 7/26/2011 10:58 AM, Ryan West wrote:
On Tue, Jul 26, 2011 at 10:44:19, Jeff Kell wrote:
Subject: [c-nsp] ASA 8.3/8.4 management issues...
I have some remote sites running off of ASA 5505s, and an existing VPN
cluster running 8.4(2).
I've rolled everything back to 8.4.1 interim. I have
On 7/25/2011 3:02 PM, Travis Schick wrote:
The problem as I understand it - is that without having a network connection
- you are
unable to verify the server presenting the certificate to you - you need to
trust it
first - and for win7/macosx the default is to prompt the user.
If the
We are finally planning a WPA2 rollout after years of procrastination (or more
truthfully, finally having some time to devote to the task...)
We have Aruba, passing through Bradford, with Radius supplied by Radiator, and
authenticating NTLM to Active Directory (Win2K8).
With just a self-signed
201 - 300 of 810 matches
Mail list logo
