Re: Stus-List Traveler for C 35 Mk II

I should note that I'm also a fan of Garhauer. Guido helped customize my genoa cars to fit on my Merriman track, also at no additional charge. Sent from my iPhone > On May 2, 2017, at 2:23 PM, Rick Brass via CnC-List > wrote: > > Garhauer both used a “high” track and

Re: Stus-List Question about anchor light

I like my Hella. Sent from my iPhone > On May 7, 2018, at 11:38 AM, Matthew Schlanger via CnC-List > wrote: > > My mast is down and I was thinking of changing out the bulb on my anchor > light to an LED. > On my C 35 Mk3 I have a Aqua Signal Series 40 All-Round

Re: Stus-List Replacement Spreader

Call South Shore Sent from my iPhone > On May 18, 2018, at 10:21 PM, Jamie Stewart via CnC-List > wrote: > > I have a 1980 C 36, and last weekend found that the lower port side > spreader was damaged when the mast was taken down last fall. Does anyone > know who made

Re: Stus-List insurance

Agreed. I suspect we’re paying for hurricane damage. Sent from my iPhone > On Feb 3, 2018, at 3:50 PM, ahycrace ahycrace via CnC-List > wrote: > > Hello all > >Well I just got my insurance bill from boat US and it went up > 238$ a pretty big

Re: Stus-List Toe Rail water drain

My 34 (previous boat) had deck scuppers as Bill described. The port one was routed in the compartment behind the fuses. Stupid in my view. Sent from my iPhone > On Feb 11, 2018, at 12:15 PM, Christian Planton via CnC-List > wrote: > > > > Thank you for all those

Re: Stus-List Choice of sealant for these jobs?

I use 4200 for sealing most things attached to the deck, although I’m becoming a believer in butyl tape. I suggest not using 5200 for anything you don’t want damaged if you ever need to remove it. Sent from my iPhone > On Apr 20, 2018, at 12:01 PM, Bruce Whitmore via CnC-List >

Stus-List Re: Galley sink drain C 30 Mk1

The sink drain in my galley (C 42 Custom) discharges through a thru-hull directly below the sink. The sink in the head is configured the same way. If I were to do it over, I might offset the thru-hulls a bit so the hoses wouldn’t interfere with storage as they do now. From: Jeff Nelson

Stus-List Re: [EXTERNAL] Re: Lithium vs AGM

I replaced my lead acid batteries with AGM about two years ago. Shortly after I installed them, my battery charger coincidentally went bad, and I was not charging at the dock (despite thinking I was). I discovered the problem as I was preparing for a 15-hour delivery, and initially believed

Stus-List Re: [EXTERNAL] Re: Lithium vs AGM

, Kentucky 40220 (502) 584-7255 On Tuesday, February 20, 2024 at 02:15:53 PM EST, Matthew Wolford via CnC-List mailto:cnc-list@cnc-list.com> > wrote: I replaced my lead acid batteries with AGM about two years ago. Shortly after I installed them, my battery charger coincidentall

Stus-List Re: [EXTERNAL] Re: Lithium vs AGM

Stu: It occurred to me the bounce back issue earlier today may have been my failure to trim. Sorry. Matt From: Matthew Wolford via CnC-List Sent: Tuesday, February 20, 2024 7:26 PM To: 'Richard Bush' ; 'Stus-List' Cc: Matthew Wolford Subject: Stus

Stus-List Re: C 37 Rudder post assembly

I suggest starting there.  If Rob doesn’t have one, he may be able to suggest an alternate source.Sent from my iPhoneOn Dec 9, 2023, at 9:47 AM, Barry McKee via CnC-List wrote:Yes they are. Barry McKee C 29 “Discovery II”Bronte, ON From: Matthew Wolford via CnC-List [mailto:cnc-list@cnc-list.com

Stus-List Re: C 37 Rudder post assembly

Is South Shore Yachts still in business?Sent from my iPhoneOn Dec 8, 2023, at 3:00 PM, Richard Bush wrote:Hi all; Bill is the winner for long distance diagnosing...; there is  a chrome "collar" or "nut' which is threaded and the the top of the rudder post which is also threaded; the collar is

Stus-List Re: C 37 Rudder post assembly

n Richard Richard N. Bush Law Offices 2950 Breckenridge Lane, Suite Nine Louisville, Kentucky 40220 (502) 584-7255 On Saturday, December 9, 2023 at 09:53:00 AM EST, Matthew Wolford via CnC-List < <mailto:cnc-list@cnc-list.com> cnc-list@cnc-list.com> wrote: I sugg

Stus-List Re: going all pex

Someone else on the list went with pex and circulated photos a couple years ago. Very professional-looking. I’m sticking with hose (for now) because it bends easily where needed. From: Della Barba, Joe via CnC-List Sent: Tuesday, January 16, 2024 11:40 AM To: Stus-List Cc: Della Barba,

Stus-List Re: C Rugby shirts

I'll be in for a few. I personally like a heavier rugby shirt. -Original Message- From: Motion Designs Limited via CnC-List Sent: Tuesday, January 9, 2024 12:11 PM To: Stus-List Cc: Motion Designs Limited Subject: Stus-List C Rugby shirts 8 oz or 12 oz Rugby Shirts Lighter is a

Stus-List Question and info

Listers: Hope everyone is doing well. I have a question and a small project some of you may find of interest. First, the question: does anyone know of a good source for stainless spiral retaining clips for winches (to hold the drum down)? I have some

Stus-List Re: C 37 Rudder post assembly

Sounds like the quadrant may have prevented it from falling out. How is it supported at the deck? Sent from my iPhone > On Dec 7, 2023, at 3:15 PM, Richard Bush via CnC-List > wrote: > >  > > Hi all; I am in need the collective wisdom of the group for a rudder issue; > my boat (1985 C 37

Stus-List Re: C 37 Rudder post assembly

The collective wisdom appears to be the deck fitting.  On my 42, the post is supported at the deck by two bronze rollers (I’ve discussed the design previously).  A pin goes through the post and the rollers are held in place with nuts on each end.  I had a nut come off several years ago, which

Stus-List Re: Hand rail replacement- sources

Peter: I replaced the handrails on my 34, and subsequently on my 42 Custom, with stainless. In my case, I removed the old handrails, laid out pieces of thick paper over the bolt holes (totally flat, taped in place), and made patterns of the holes. The paper patterns were then rolled up

Stus-List Re: Hand rail replacement- sources

like you can do with wood. The stainless is too rigid. From: Matthew Wolford via CnC-List Sent: Thursday, November 30, 2023 7:26 AM To: 'Stus-List' Cc: 'Peter W.' ; Matthew Wolford Subject: Stus-List Re: Hand rail replacement- sources Peter: I replaced the handrails on my 34

Stus-List Re: C 66

I’d be very concerned about wet core below the water line on a boat that age.Sent from my iPhoneOn Jan 16, 2024, at 6:17 PM, Joel Delamirande via CnC-List wrote:It been for sale for a long timeJoel Delamirande www.jdroofing.caOn Tue, Jan 16, 2024 at 6:01 PM John McCrea via CnC-List

Stus-List Re: Mast step fun

Interesting -- thanks! From: Nathan Post Sent: Friday, April 26, 2024 2:06 PM To: Matthew Wolford Cc: Stus-List Subject: Re: Stus-List Re: Mast step fun It is where the stainless steel tube that supports the table on mounts into it. Nathan Please show your appreciation for this list

Stus-List Re: opening port replacing fixed lenses on 1984 C

Pete: I replaced the fixed windows on my ’78 C 34 with Lewmar opening ports (roughly the same size and shape as the 70s vintage 33/34 oval windows). The issue with opening windows is that they must lay flat to work correctly. It took considerable effort to get this right on the 34 because

Stus-List Mast step fun

Listers: I thought I’d share this in case anyone has an interest. On my 42 Custom, I’ve been monitoring a small separation at the front end of the keel where it mates with the boat. I may have mentioned this previously, but my boat has two “C smiles.” For whatever reason

Stus-List Re: Hints on swapping winches?

Dean: The four winches I replaced were not "similar" in terms of make/size, but the job probably is. Mine was made more complicated because the winches were located near the mast where C had installed decorative teak decking pieces. I figured I'd just remove the teak pieces, fill the

Stus-List Re: Understanding Polars

Thanks, Dennis. How did you arrive at 10 miles. Sent from my iPhone > On Apr 5, 2024, at 5:31 PM, Dennis C. via CnC-List > wrote: > >  > Personally, I think sailing to polars can be challenging. I prefer to use > VMG. VMG rules for windward/leeward race courses! Bear with me on this. >

Stus-List Re: Hints on swapping winches?

That is a cool approach, but if I understand how it was done, the weak link IMHO is that tapped aluminum is holding the new winch. From: CHARLES SCHEAFFER via CnC-List Sent: Saturday, March 23, 2024 2:42 PM To: Stus-List Cc: CHARLES SCHEAFFER Subject: Stus-List Re: Hints on swapping

Stus-List Re: Does anyone know if Winchmate is still in business?

The name and email address I sent earlier was for the engineered Winchmate product.  My primary winches are so big the drums had to be machined and threaded to accept the product (about $300 per drum).  They work great.Sent from my iPhoneOn Feb 26, 2024, at 11:14 AM, Riley Anderson via CnC-List

Stus-List Re: Does anyone know if Winchmate is still in business?

Rick: When I converted my primaries I communicated with the owner of Winchmate. His name is David Leitch, and his e-mail address was: winchm...@yahoo.com . Don't know if he's still in business. Good luck! Matt C 42 Custom From: Rick Brass via CnC-List

Stus-List Re: Propeller Strut

Peter: Don’t know about your boat, but I can’t imagine it’s just screwed in. On my boat, the strut was through-bolted with a backing plate, but the hull was cored at this location. The result was water infiltration into the core (not just at that limited location – water

Stus-List Re: Propeller Strut

If you’re talking about replacing balsa core, West System and colloidal silica. From: Peter Cowenhoven via CnC-List Sent: Monday, March 4, 2024 12:06 PM To: Stus-List Cc: Peter Cowenhoven Subject: Stus-List Re: Propeller Strut Thanks guys. I'm having the dripless replaced and it does

Stus-List Re: C 35 MK I interior

My 42 Custom is also a Bruckmann “stick built” boat. In my case, certain aspects of the boat were well constructed, others not so much. For example, the recent project I commented on concerns the mast step. It was constructed of aluminum and designed to span three stringers. Given the

Stus-List Re: Material choice & Sources for clear hatch boards

As I recall, Lexan is preferred for horizontal surfaces (like a hatch cover) where someone might stand because it’s stronger than regular plexi (acrylic). It also scratches more easily, so for vertical use plexi is fine. I bought a half sheet of plexi to replace my windows and make hatch

Stus-List Re: raw water filter set up for C 35 MkI

I installed Groco filters on my 34 and 42 Custom. Better than sucking a plastic bag or weeds into your system. From: Glen Eddie via CnC-List Sent: Monday, April 8, 2024 9:00 AM To: cnc-list@cnc-list.com Cc: Glen Eddie Subject: Stus-List raw water filter set up for C 35 MkI Hello

Stus-List Re: C 35 MK I interior

Thanks, Martin – very Interesting. Do you have the “I-beam” fix drawing in pdf format? If so, may I have a copy? It has always been troubling to me that, unlike car manufacturers, boat manufacturers do not alert boat owners about potentially dangerous issues upon discovery. Case in

Stus-List Re: C 35 Mk 2 available

A benefit of the older 35s, as I recall, is that the hull is solid glass. No core to worry about. From: John Read via CnC-List Sent: Tuesday, May 21, 2024 6:21 PM To: Stus-List Cc: John Read Subject: Stus-List Re: C 35 Mk 2 available David. My alma mater Tabor Academy lm Marion, MA