that were compressed came up with io error... rolled back to the previous
version and it all came back to working again.
I will try the next one past 2.6-4
Thanks
Alex
-Original Message-
From: Ritesh Raj Sarraf [mailto:r...@researchut.com]
Sent: Thursday, 9 June 2011 6:23 PM
To: Alex Samad
Package: fusecompress
Version: 2.6-4
Severity: grave
Justification: causes non-serious data loss
Hi
i have been running version 2.6.3 for a while and when I upgraded to 2.6.4 i
was unable to access my underlying data
alex
-- System Information:
Debian Release: wheezy/sid
APT prefers
Hi
Sorry apologies, very light on the information. I did an upgrade of slapd
and when slapd went to start there were errors could not start expecting
version xxx and found version . At that point I guessed it was the libdb
package needed to be brought into line with slapd. Once I loaded that
Package: linux-2.6
Version: 2.6.34-1~experimental.2
Severity: normal
Tags: patch
Hi
there is a problem with qcserial since ... 2.6.32 I think - there is currently
a regression bug. Seems like there was a change in the fifo
the new method doesn't handle frmware uploads well
There is a patch
Package: btnx
Version: 0.4.11-3
Severity: normal
Hi
Attached patch for udev rule - seems to work on my system
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable'), (100, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux
Package: collectd
Version: 4.9.1-2
Severity: normal
Hi
when I have collectd running, my sync's don't finish. if I start sync and have
collectd
running, then it will hang until I stop collectd
I have turned off all the modules that touch disk, but still have the problem
Alex
-- System
upload.
+ * add env var pptp_nohostroute to not allow pptp to add route to houst
+ * add env var pptp_hostroute_tab to tell pptp which route table to add
+route host in
+
+ -- Alex Samad a...@samad.com.au Fri, 09 Apr 2010 23:55:34 +1000
+
pptp-linux (1.7.2-4) unstable; urgency=low
On Tue, Feb 16, 2010 at 05:58:52PM +0100, maximilian attems wrote:
On Tue, 09 Feb 2010, Alex Samad wrote:
I have got 2.6.32-6-686 installed on the machine - same problem
I can't seem to find a 2.6.32-2-686 (my amd64 is on -7)
so later should have been available since, how is status
On Mon, Feb 08, 2010 at 01:49:28PM +0100, maximilian attems wrote:
On Mon, Feb 08, 2010 at 09:41:46AM +1100, alex wrote:
Package: linux-2.6
Version: 2.6.32-5
Severity: normal
outdated please install newer from unstable.
has many fixes.
Interestingly I can only find 2.6.32-5 on the web
On Mon, Feb 08, 2010 at 11:19:16PM +, Ben Hutchings wrote:
On Tue, 2010-02-09 at 07:37 +1100, Alex Samad wrote:
On Mon, Feb 08, 2010 at 01:49:28PM +0100, maximilian attems wrote:
On Mon, Feb 08, 2010 at 09:41:46AM +1100, alex wrote:
Package: linux-2.6
Version: 2.6.32-5
Hi
Thanks for the explanations
Alex
On Wed, Feb 03, 2010 at 12:08:15PM +0100, JCF Ploemen wrote:
1. Those release candidates are quickly moving targets; internal release
testers are already at rc5 right now with rc6 likely within days, so it
seems to make more sense to wait for the final.
I have a chat on the linux-kernel ml and basically you have to set both of
the redirects.
So you can close the bug.
Thanks
-Original Message-
From: maximilian attems [mailto:m...@stro.at]
Sent: Wednesday, 3 February 2010 8:50 AM
To: Alex Samad; 557...@bugs.debian.org
Subject: Re: Bug
Package: sabnzbdplus
Version: 0.4.12-1
Severity: wishlist
Hi
rc3 of 0.5 has been release, wondering if we can get this in unstable ??
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable'), (100, 'unstable'), (50,
On Thu, Jan 28, 2010 at 09:37:07PM +0100, Arthur de Jong wrote:
On Wed, 2010-01-27 at 21:39 +1100, Alex Samad wrote:
I am getting
nslcd[4724]: [8d6a35] entry uid=alex,ou=People,dc=samad,dc=com,dc=au
contains multiple cn values
because by object has multiple cn's which is allowed
Package: nslcd
Version: 0.7.2
Severity: minor
Hi
I am getting
nslcd[4724]: [8d6a35] entry uid=alex,ou=People,dc=samad,dc=com,dc=au contains
multiple cn values
because by object has multiple cn's which is allowed for this object class. I
was wondering if maybe
the best way to handle this is
Package: denyhosts
Version: 2.6-6
Severity: normal
Hi
Currently the sync process doesn't use a proxy
xmlrpc_connect(self): in sync.py
self.__server = ServerProxy(self.__prefs.get('SYNC_SERVER'))
from the doco need to use a custom transport to use a proxy, this should be
linked to
http_proxy
Package: jxplorer
Version: 3.2rc2+dfsg-1
Severity: important
start up scripts runs java-wrappers, java-wrappers pacakge should be a in
depends
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable'), (100, 'unstable')
Package: rdiff-backup
Version: 1.2.8-5
Severity: normal
Hi
There seems to be a problem with the way that rdiff-backup handles changes to
hardlinks between backups its documented with patch on the rdiff-backup bugs
site
http://savannah.nongnu.org/bugs/index.php?26848
Could be get the patch
Package: linux-2.6
Version: 2.6.31-2
Severity: normal
Hi
I have a local lan network
192.168.11.0/24 dgw - 192.168.11.1
I also have a wireless network
192.168.10.0/24 dgw - 192.168.10.1
the router at 192.168.10.1 is a linux server with the address 192.168.11.10 as
well.
I have placed a ip
another upload, perhaps with the tip, to the
experimental archive.
Ritesh
On Saturday 07 Nov 2009 11:04:06 Alex Samad wrote:
On Sat, Nov 07, 2009 at 10:24:54AM +0530, Ritesh Raj Sarraf wrote:
Hi Alex/Michel,
What HDD capacity do you have ?
And how much space utilization does
might help if I attach something
~strace -o fusemax.strc -ff fusecompress -o
fc_ma:application/zip,fc_c:bzip2,fc_d /backups/.max/ /backups/max/
fusecompress.max.1.txt 2fusecompress.max.2.txt
*** glibc detected *** strace: munmap_chunk(): invalid pointer:
0x01deb2c0 ***
===
On Thu, Oct 22, 2009 at 03:02:55PM +0530, Ritesh Raj Sarraf wrote:
On Thursday 22 Oct 2009 14:44:13 Alex Samad wrote:
all i know when i do a df before it lists all the partitions, when I
ran these programs and it failed, I would run df afterwards it would
then show a fault, when i
On Thu, Oct 22, 2009 at 03:02:55PM +0530, Ritesh Raj Sarraf wrote:
On Thursday 22 Oct 2009 14:44:13 Alex Samad wrote:
all i know when i do a df before it lists all the partitions, when I
ran these programs and it failed, I would run df afterwards it would
then show a fault, when i
On Sun, Oct 18, 2009 at 03:21:31PM +0530, Ritesh Raj Sarraf wrote:
On Sunday 18 Oct 2009 14:21:44 Alex Samad wrote:
Aren't you supposed to be accessing the data only through a fusecompress
mounted mount point ?
I was testing this when I was looking at the fusecompress_offline which
On Sun, Oct 18, 2009 at 03:20:15PM +0530, Ritesh Raj Sarraf wrote:
On Sunday 18 Oct 2009 14:25:11 Alex Samad wrote:
bzip2 is a high compression algorithm. It could just be that there is no
room for compression anymore.
some file type (based my mime type) are meant to be excluded from
On Thu, Oct 22, 2009 at 03:02:55PM +0530, Ritesh Raj Sarraf wrote:
On Thursday 22 Oct 2009 14:44:13 Alex Samad wrote:
all i know when i do a df before it lists all the partitions, when I
ran these programs and it failed, I would run df afterwards it would
then show a fault, when i
On Thu, Oct 22, 2009 at 01:12:47PM +0530, Ritesh Raj Sarraf wrote:
On Thursday 22 Oct 2009 12:30:10 alex wrote:
/backup/.max - raw partition it is fusecompress mounted on /backups/max. i
have a directory /backups/max/max which has a few files in it, roughly
500M in about 10-12 files. 1
On Thu, Oct 22, 2009 at 02:34:13PM +0530, Ritesh Raj Sarraf wrote:
On Thursday 22 Oct 2009 14:11:02 Alex Samad wrote:
I am not sure, like i said looking at dmesg, syslog shows no sign of any
sigfault
all i know when i do a df before it lists all the partitions, when I ran
On Thu, Oct 22, 2009 at 06:52:41PM +0200, intrigeri wrote:
Hi,
could you please answer the first question I asked? It seems like you
missed it. Here it is again:
On Tue, Oct 20, 2009 at 08:32:56AM +0200, intrigeri wrote:
Does the when = manual option (Closes: #511299), available in Git,
On Tue, Oct 20, 2009 at 08:32:56AM +0200, intrigeri wrote:
tags 551422 + moreinfo
thanks
Hi,
Alex Samad wrote (16 Oct 2009 05:04:13 GMT) :
I am on a laptop and I would like to configure backupninja to do
backups when I am on a secific site. I was thinking having a backup
when
On Sun, Oct 18, 2009 at 11:36:57AM +0530, Ritesh Raj Sarraf wrote:
On Sunday 18 Oct 2009 08:44:01 alex wrote:
Hi
it seems to be compressing zip files
/backup/.max fusemounted to /backup/max
zip /backup/max/test.zip /etc
/backup.max/test.zip has been compressed
Can you
On Sun, Oct 18, 2009 at 11:42:26AM +0530, Ritesh Raj Sarraf wrote:
On Sunday 18 Oct 2009 08:42:30 alex wrote:
I have added
0 string \037\135\211FuseCompress(ed) data
to /etc/magic
but when I file compressed file I get data, when I look at it with hexer
this is the first
On Sun, Oct 18, 2009 at 12:25:22PM +0530, Ritesh Raj Sarraf wrote:
On Sunday 18 Oct 2009 12:00:36 Alex Samad wrote:
my uncompressed directory is /backups/.max, it is fusemounted to
/backusp/max.
the file /backups/max/max/alex.zip is being compressed - when I check
/backups/.max/max
On Sun, Oct 18, 2009 at 12:23:13PM +0530, Ritesh Raj Sarraf wrote:
On Sunday 18 Oct 2009 11:58:10 Alex Samad wrote:
ls -l .max/max/alexMail.zip max/max/alexMail.zip
-rw-r--r-- 1 root root 333M Oct 17 22:06 .max/max/alexMail.zip
-rw-r--r-- 1 root root 335M Oct 17 22:06 max/max/alexMail.zip
On Sun, Oct 18, 2009 at 03:20:15PM +0530, Ritesh Raj Sarraf wrote:
On Sunday 18 Oct 2009 14:25:11 Alex Samad wrote:
bzip2 is a high compression algorithm. It could just be that there is no
room for compression anymore.
some file type (based my mime type) are meant to be excluded from
Package: backupninja
Version: 0.9.6-4
Severity: wishlist
Hi
I am on a laptop and I would like to configure backupninja to do backups when I
am on a secific site. I was thinking having a backup when of manual and being
able to run all the manual backupninja jobs from command line would be
Package: icedtea6-plugin
Version: 6b16-1.6.1-1
Severity: normal
Hi
plugin failes to load applet on http://www.java.com/en/download/help/testvm.xml
works with the sun plugin
Alex
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing'), (100,
On Mon, Aug 31, 2009 at 08:02:18AM +0200, Yves-Alexis Perez wrote:
On lun, 2009-08-31 at 13:50 +1000, Alex Samad wrote:
done some more testing, rebooting. now using the icon to suspend doesn't
suspend the machine, it does lock the screen.
Ok so first you have a permissions problem, which
On Mon, Aug 31, 2009 at 09:42:00AM +0200, Yves-Alexis Perez wrote:
On lun, 2009-08-31 at 17:34 +1000, Alex Samad wrote:
okay looks like your on to something
ls -l /usr/lib/policykit/polkit-read-auth-helper
-rwxr-xr-x 1 root polkituser 9.9k 2009-06-18 18:01
/usr/lib/policykit/polkit
On Mon, Aug 31, 2009 at 05:44:56PM +1000, Alex Samad wrote:
On Mon, Aug 31, 2009 at 09:42:00AM +0200, Yves-Alexis Perez wrote:
On lun, 2009-08-31 at 17:34 +1000, Alex Samad wrote:
okay looks like your on to something
ls -l /usr/lib/policykit/polkit-read-auth-helper
-rwxr-xr-x 1
On Mon, Aug 31, 2009 at 06:07:55PM +1000, Alex Samad wrote:
On Mon, Aug 31, 2009 at 09:47:58AM +0200, Yves-Alexis Perez wrote:
On lun, 2009-08-31 at 17:44 +1000, Alex Samad wrote:
[snip]
For the correct permissions on the helper I guess? Correct that and it
should fix your problem, imho
On Sun, Aug 30, 2009 at 05:08:39PM +0200, Yves-Alexis Perez wrote:
On dim, 2009-08-30 at 12:19 +1000, Alex Samad wrote:
I seem to be having the same problem on a hp mini 5101, when i have
xfce4-power-manager started I can't get into sleep mode, although it
does lock the screen - via
On Mon, Aug 31, 2009 at 12:59:23AM +0200, Yves-Alexis Perez wrote:
On lun, 2009-08-31 at 07:21 +1000, Alex Samad wrote:
And does it work when you do that from xfce4-session logout screen? Does
it work when you use the right clic on xfpm icon?
haven't tried from the logout screen
On Mon, Aug 31, 2009 at 10:41:16AM +1000, Alex Samad wrote:
On Mon, Aug 31, 2009 at 12:59:23AM +0200, Yves-Alexis Perez wrote:
On lun, 2009-08-31 at 07:21 +1000, Alex Samad wrote:
[snip]
configure it to do what you want, and does it detects when you press the
sleep button?
Okay I re
Hi
I seem to be having the same problem on a hp mini 5101, when i have
xfce4-power-manager started I can't get into sleep mode, although it
does lock the screen - via xscreensaver
i placed some code in /etc/acpi/sleep.sh and found it was being called
but because it xfpm is running it doesn't
Hi
seems like there is a bugzilla for this now
http://bugzilla.kernel.org/show_bug.cgi?id=13375
Alex
signature.asc
Description: Digital signature
Hi
I have had 3 more crashes today, I have noticed it happens when I place
it under load.
all the times I had 2 VM (Virtulbox) going and I started a rm -fr (on
about 300M of data) across a nfs mount share (on the same box), again
the same error, I have also notices this is happening with xfs
Hi
Yeah i am thinking its a xfs problem as well, most of the crashes I am
getting are when i touch XFS via nfs, doing local xfs stuff seems to be
okay - if i was to guess i would say also only on writes
I might try going back to 28.7
have you posted anything on the kernel mailing list
Alex
Hi
I was wondering if using the patch supplied works
patch-vzaphfc-with-netdev_priv.diff
Any idea when we might see a new zaptel-source that build cleanly
against 2.6.29-2
Thanks
signature.asc
Description: Digital signature
Hi
I believe 442871 and 522065 and duplicates. Seems like in the 1.7 tree
the source uses sudo-ldap.conf
This and the change to nsswitch to by default not use sudoers: ldap files
I think its in line to keep using /etc/sudo-ldap.conf, same as nss + pam
have their own conf files
I upgraded to
On Wed, Mar 25, 2009 at 06:45:37PM +1100, Mark Purcell wrote:
On Tuesday 24 March 2009 17:40:35 Alex Samad wrote:
[UPGRADE] libmediastreamer0 2.1.1-1+b1 - 3.0.0-3
and it fixed the problem.
Looks like we should version the libs ;-(
it looks like a major version number change
Mark
On Sat, Nov 08, 2008 at 01:11:38AM +0100, Moritz Muehlenhoff wrote:
On Sun, Jun 29, 2008 at 06:18:10PM +1000, Alex Samad wrote:
Package: linux-image-2.6.25-2-amd64
Version: 2.6.25-5
Severity: normal
I recently bought a gigabyte GA-MA78GM-S2H motherboard, comes with a
Realtek 8111C
Hi
I had the same problem, updated
[UPGRADE] libexosip2-4 3.1.0-1 - 3.3.0-1
[UPGRADE] libmediastreamer0 2.1.1-1+b1 - 3.0.0-3
and it fixed the problem.
alex
signature.asc
Description: Digital signature
On Mon, Mar 02, 2009 at 11:00:39AM +0100, Ludovic Rousseau wrote:
alex a écrit :
Package: jhead
Version: 2.85-1
Severity: normal
[snip]
I can't reproduce your problem using jhead 2.86-2 from testing.
$ find
.
./0301-081013.jpg
$ jhead 0301-081013.jpg
File name: 0301-081013.jpg
Package: leafnode
Version: 1.11.7.rc1-9
Severity: normal
I did not want leafenode todo a fetch on install, I had set it to none, should
atleast ask before doing a forced fetch.
Alex
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing'), (500,
: Re: Bug#506849: leafnode: leafenode does forced fecth on install
On Tue, Nov 25, 2008 at 08:58:20PM +1100, Alex Samad wrote:
I did not want leafenode todo a fetch on install, I had set it to none,
should atleast ask before doing a forced fetch.
There is a debconf question for updating
Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-6
Severity: normal
When i reboot my machine after putting it into s2disk mode, I have to
rmmod iwl4965 and then modprobe it before it will work
I have tried restarting dhcp, but no packets leave the interface, that I
can see with tcpdump
Package: libuuid1
Version: 1.41.0-3
Severity: normal
My group libuuid is in my ldap DB, install of package fails unless I
place it in my /etc/group file
Whilst checking the postinst file I also notice you check for user in
/etc/passwd - my user is kept in ldap, maybe a check against gentent
Package: nscd
Version: 2.7-13
Severity: normal
Hi
I have a userid alex, when I attempt to login to the machine (by
accident) with ssh [EMAIL PROTECTED], it failes, because there is no userid
ALEX. but when I login with ssh [EMAIL PROTECTED] it logins me in, but my
id is now ALEX. I can't sudo
Package: make
Version: 3.81-5
Severity: wishlist
Hi
if I do a
make -p -f/dev/null | grep -i include
make: *** No targets. Stop.
.INCLUDE_DIRS = /usr/include /usr/local/include /usr/include
show me the default INCLUDE_DIRS and /usr/include is included twice.
But I think the more important
Hi
Below is email from the linux-nfs mailing list with a patch to fix
problem
Thanks
- Forwarded message from Alex Samad [EMAIL PROTECTED] -
From: Alex Samad [EMAIL PROTECTED]
To: Neil Brown [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: mount issue with Mac OSX and --manage
Hi
This is the patch I got from the linux-nfs mailing list, I have compiled
with the patch ( had to munge it a bit) and it fixes the problem
Thanks
- Forwarded message from Alex Samad [EMAIL PROTECTED] -
From: Alex Samad [EMAIL PROTECTED]
To: Neil Brown [EMAIL PROTECTED]
Cc: [EMAIL
Hi
Sorry this was mean for bug 492827
Alex
On Fri, Aug 01, 2008 at 07:00:20PM +1000, Alex Samad wrote:
Hi
Below is email from the linux-nfs mailing list with a patch to fix
problem
Thanks
- Forwarded message from Alex Samad [EMAIL PROTECTED] -
From: Alex Samad [EMAIL
Package: nfs-kernel-server
Version: 1:1.1.2-6
Severity: important
When ever I start my nfs server with --manage-gids, my mac os clients
hang, I have tried with secure and insecure, tcp udp.
I found when I removed the --manage-gids it all worked. My linux
clients work with out with out
Package: xvnc4viewer
Version: 4.1.1+X4.3.0-21
Severity: normal
Hi
When you hit ctrl+c when it is asking for a password it doesn't reset
the terminal back. You can't see what you are typing
Alex
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500,
Hi
I believe this bug can be closed now. I posted the question on
linux-kernel mailing list. A reply came back about mtu issues.
Seems like I had 2 problems
net.ipv4.tcp_rmem = 409687380 2097152
in my sysctl.conf, a hang over from long ago
and my mtu was set wrongly the route
Package: gallery2
Version: 2.2.5-2
Severity: normal
It would be good if /usr/share/gallery2/{modules,themes} directories
where made chowned by www-data.www-data this way you could manage
plugins and themes from the gallary admin page
-- System Information:
Debian Release: lenny/sid
APT
Package: mdadm
Version: 2.6.4-2
Severity: normal
Hi
I have started to received these errors in dmesg when the monthly array
check happens
[569708.399818] md: data-check of RAID array md0
[569708.399823] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[569708.399826] md: using maximum
Package: linux-image-2.6.25-2-amd64
Version: 2.6.25-5
Severity: normal
I recently bought a gigabyte GA-MA78GM-S2H motherboard, comes with a Realtek
8111C chip nic.
I have installed debian (amd64) and I notice when I use ifconfig
eth0 Link encap:Ethernet HWaddr 00:1f:d0:59:14:a1
://www.debian.org/
[EMAIL PROTECTED] [EMAIL PROTECTED]
From: Alex Samad [EMAIL PROTECTED]
To: Debian Bug Tracking System [EMAIL PROTECTED]
Subject: overwrites /etc/default/slapd /etc/ldap/ldap.conf on upgrade from
2.3 - 2.4
Package: slapd
Version
On Sun, Jun 29, 2008 at 11:48:54AM -0700, Steve Langasek wrote:
On Sun, Jun 29, 2008 at 07:14:02PM +1000, Alex Samad wrote:
I had thought I had replied already.
I have hand crafted ldap.conf and /etc/default/slapd, but every time i
upgrade the packages these files are overridden
Package: linux-image-2.6.25-2-amd64
Version: 2.6.25-4
Severity: normal
Hi
I seem to be having this problem since kernel 2.6.20, previously when I logged
it I had a tainted kernel. Since then I have removed nvidia, truecrypt and
vmware.
I have 2 very similar machines, both amd64 both shuttle
On Wed, Jun 11, 2008 at 08:26:45AM +0200, Aurelien Jarno wrote:
Alex Samad a écrit :
Package: qemu
Version: 0.9.1-5
Followup-For: Bug #401121
Hi
I have been trying to run the debian installer (testing amd64 net inst)
qemu-system-x86_64 -kernel-kqemu -boot d -cdrom
/srv/ISO
Package: qemu
Version: 0.9.1-5
Followup-For: Bug #401121
Hi
I have been trying to run the debian installer (testing amd64 net inst)
qemu-system-x86_64 -kernel-kqemu -boot d -cdrom
/srv/ISO/debian-testing-amd64-netinst.iso -hda
/srv/qemu/amd64/disk1.img -vnc localhost:1 -m 512
it crashes in
the next release.
thanks
On Sat, May 24, 2008 at 05:23:06PM -0700, Russ Allbery wrote:
Alex Samad [EMAIL PROTECTED] writes:
I was wondering if this is going to be looked at. with the move to perl
5.10 and it associated dependencies, one of them indirectly being
ldap-utils, mean a reliance
Package: reprepro
Version: 3.3.2-1
Severity: normal
while attempting to include a source package I failed to supply -P, the
error returned was section not provided, when it should have said
prioroty not provided
Alex
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT
Hi
I was wondering if this is going to be looked at. with the move to perl
5.10 and it associated dependencies, one of them indirectly being
ldap-utils, mean a reliance on the gnutls libraries and thus no access
to encrypted private keys
Alex
signature.asc
Description: Digital signature
On Tue, May 20, 2008 at 09:38:41AM +0200, Petter Reinholdtsen wrote:
The splash_user_input() API in /lib/init/splash-functions-base is
supposed to be able to handle this. Is the process asking for a
password using it? Is it implemented in splashy?
I did a fresh install of debian using an
Package: linux-image-2.6.24-1-amd64
Version: 2.6.24-5
Severity: normal
I seem to be getting a lot of swapper page allocation faults especially
when I am loading the network, 1G with 9k mtu. I am using forcedeth with
max_int_work set to 15
I have attached a sample from the syslog, not sure what
Package: gnupg-agent
Version: 2.0.9-2
Severity: normal
I have started up gpg-agent as a ssh-key agent as well, when i ssh into
a remote box it asks for my gpg private key password, it should realise
it is a ssh request and try the ssh keys first
alex
-- System Information:
Debian Release:
On Mon, May 19, 2008 at 10:14:54AM +0200, Bastian Blank wrote:
On Mon, May 19, 2008 at 05:36:49PM +1000, Alex Samad wrote:
I seem to be getting a lot of swapper page allocation faults especially
when I am loading the network, 1G with 9k mtu. I am using forcedeth with
max_int_work set to 15
Package: gnupg-agent
Version: 2.0.9-2
Followup-For: Bug #412993
Hi
I would like to second Edward Guldemond request, gpg-agent should only
be started if use-gpg-agent is in the Xsessions.option file
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500,
Package: xinit
Version: 1.0.8-1
Severity: normal
This line
xserverauthfile=`mktemp -p /tmp serverauth.XX`
in startx doesn't honour TMPDIR, should be
xserverauthfile=`mktemp -p $TMPDIR serverauth.XX`
Alex
-- System Information:
Debian Release: lenny/sid
APT prefers testing
Package: splashy
Version: 0.3.8-1
Severity: normal
I am unable to enter my LUKS password at boot up, I have to leave
splashy esc and then change to tty2 and then when I type my password
it is in clear text!
Alex
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT
Package: multitail
Version: 5.2.1-2
Severity: normal
whilst viewing squid cache.log file I noticed that multitail tries to
chnage the date fro epoch to date. cache.log already has the store
store as the first entry. epochtodate is still needed for access.log +
store.log.
suggest have another
Hi
I seem to have the same problem with pam_unix2 and xscreensaver but I
am not sure if it is the same problem
this is the output I get from pam_unix2 debug
Apr 24 16:12:37 hufpuf xscreensaver: pam_unix2(xscreensaver:auth):
pam_sm_authenticate() called
Apr 24 16:12:37 hufpuf xscreensaver:
On Sat, Apr 19, 2008 at 03:56:12PM +0200, Arthur de Jong wrote:
On Sat, 2008-04-12 at 12:05 +1000, Alex Samad wrote:
Currenlt nscld is set to start by default at level 20, which is the same
level as exim. exim coming first becuase of alphabet. This mean for a
period of time no ldap users
Package: libnss-ldapd
Version: 0.6
Severity: normal
Hi
Currenlt nscld is set to start by default at level 20, which is the same
level as exim. exim coming first becuase of alphabet. This mean for a
period of time no ldap users are valid with regards to exim. I have seen
bounced emails because
Package: mdadm
Version: 2.6.4-1
Severity: normal
seems like there is an error in 2.6.x stream of mdadm, when trying to
hot add a disk to a raid1 array after 1 disk failed.
I tried to do it and I kept getting errors. down graded to 2.5.x and it
worked fine.
Found this thread (with patch)
On Fri, Apr 04, 2008 at 11:34:38PM +0200, Arthur de Jong wrote:
On Sun, 2008-03-30 at 07:17 +1100, Alex Samad wrote:
That would be a solution but not something I would want to
implement. If it were some sort of search already I could add it but
since this is an attribute lookup like
Package: pgadmin3
Version: 1.4.3-2.1
Followup-For: Bug #458119
Hi
Just thought I would add to this, seems like pgadmin3 1.8 has problems
with postgres 8.3.
seems a bit silly all this packages are getting held up by the widget
library
alex
-- System Information:
Debian Release: lenny/sid
On Sat, Mar 29, 2008 at 12:04:39AM +0100, Arthur de Jong wrote:
tags 472872 + pending
thanks
First of all to reply to your earlier mail, reporting bugs is fine for
me and makes it easy to track.
On Thu, 2008-03-27 at 10:24 +1100, Alex Samad wrote:
Seems like libnss-ldapd checks
On Mon, Mar 24, 2008 at 10:19:11AM +0100, Arthur de Jong wrote:
On Mon, 2008-03-24 at 17:35 +1100, Alex Samad wrote:
Arthur, is there anything missing in libnss-ldapd, that is in
libnss-ldap (apart from bugs :) ). Is it a simple drop in replacement?
nss-ldapd should be a drop
Package: libnss-ldapd
Version: 0.6
Severity: important
Seems like libnss-ldapd checks for object class by reading a ldapobject
in and then checking the objectclass attribute for a specific record.
On my ldap setup I do not allow for objectclass to be read by any user,
you can search. This causes
Package: libnss-ldap
Version: 259-1
Followup-For: Bug #466647
Hi
I think I have been having similair problems caused by libnss-ldap,
bug 466610, bash crashing trying to do a tab complete of usernames ie
~altab.
I noted the last good version of libnss-ldap was 258-1, think this was
the 2nd to
On Mon, Mar 24, 2008 at 05:35:16PM +1100, Alex Samad wrote:
Package: libnss-ldap
Version: 259-1
Followup-For: Bug #466647
Hi
I think I have been having similair problems caused by libnss-ldap,
bug 466610, bash crashing trying to do a tab complete of usernames ie
~altab.
I noted
Package: thunar
Followup-For: Bug #469928
Hi
I have tracked down the problem with jpegtran I am using -copy all,
which also includes a thumbnail - this thumbnail is not be modified by
jpegtran. I believe thunar is using this to build the thumbnails
-- System Information:
Debian Release:
Package: thunar
Version: 0.9.0-3
Severity: normal
I was viewing a directory of jpgs in icon view, I then manipulated the
photos with jpegtran, doing rotate's. the images thumbnails had the
previous image (unrotated). I have delete ~/.thumbnails and kills off
all the thunars process's and tried
Package: bash
Version: 3.1dfsg-9
Severity: normal
Hi
I am having problems when I try and tab expand usernames, bash crashes
When i try this
ls ~altab
malloc: unknown:0: assertion botched
free: start and end chunk sizes differ
last command: ls -l
I believe it has something to do with
Package: kronolith2
Version: 2.1.7-1
Severity: wishlist
Hi
2.2 rc1 has been available since 22 Jan, wondering when this might flow
into the debian repo's
Thanks
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable'), (100,
1 - 100 of 122 matches
Mail list logo
