Hello again,
Yes, I did reset the settings. I have the audio in set for 3 and the
audio out set to 7. I have the PTT com port blank. I now get a
display and a waterfall, but am not able to key up the TS-2000.
Any further suggestions?
And, most grateful for your help!!!
73 de KC9HEK
OK, good news on the soundcard.
Now, you should tell the set-up area in WSJT which comm port you want
to use for PTT. You will NOT be able to use the same PTT comm port
that you have selected for DM780 unless you keep DM780 closed. You
can't have two programs access the same comm port at the
It all installed OK for me - after a lengthy pause during bootup that I
thought was a frozen up computer. Patience paid off!
My problem is that the soundcard does not send enough audio to the waterfall
display, only barely flickering the first two bars in the waterfall
display color setup. -
Are you aware that the software default is MIC IN not LINE IN ? To
switch to LINE IN, boot up FL-DIGI , go in to CONFIG, click on
Soundcard and change the mixer setting to LINE IN.
Andy.
In digitalradio@yahoogroups.com, Charles Brabham [EMAIL PROTECTED] wrote:
It all installed OK for
On 14109.5 , USB, 1500hz center, ALE400 (Multipsk) , for the balance of the
day.
Try a connect
John
VE5MU
Charles,
Have you tried adjusting Upper Signal Limit and Signal Range on the status
bar to brighten the waterfall? Also, try moving the upper green slider
further up.
How are you driving the audio input of the soundcard? For example, if you
drive it from the earphone output of a transceiver
Hi Brian
Your audio settings are now right, does your PTT LED light when
you try to transmit?
I found with mine I had to set the playback mixer Wave level
fairly high and to make the PTT more reliable I put the link
on JP4.
Les G3VYZ
--- In digitalradio@yahoogroups.com, Brian [EMAIL PROTECTED]
Hi Rick,
You obviously do not use MT-63 to pass book traffic on a daily basis
on NVIS paths, fore if you did your opinion would be completely
different and if you don't believe me, just ask any MARS member that
is using a Sound Card based system these days and they will tell you
just how
I think that for the speed, MT-63 can be OK. But not that great with
difficult conditions. A lot of modes will work find with good paths. I
suspect that they have reasonably strong signals. MT-63 just does not
reach down into the noise as some other modes and I have tested it many
times under
Well, I do not have a distinct characterization of Olivia submodes.
8/500 seems to be fair enough, not too greedy on bandwidth and works
where other modes (not Olivia) fail.
I have used the most common available on MultiPSK, that is, 8/250,
8/500, and 16/500. Ocassionally, 32/1000, or even
Hello again,
Yes, I did reset the settings. I have the audio in set for 3 and the
audio out set to 7. I have the PTT com port blank. I now get a
display and a waterfall, but am not able to key up the TS-2000.
Any further suggestions?
And, most grateful for your help!!!
73 de KC9HEK
First impressions are that Patrick has a very nice bit of software in the
new ALE400 mode on
MultiPSK.
This is another step down the road to a strong ARQ mode, and It would be
great to see a number of people
Download and experiment with it. It can be found at:
12 matches
Mail list logo
