On Wed, 27 Feb 2008 14:09:49 -0800 Marion Hakanson <[EMAIL PROTECTED]> wrote:
> >Marion Hakanson <[EMAIL PROTECTED]> wrote: > >> Also: > >> cfgadm -al -o show_SCSI_LUN > >> > >> It should list the LUN's on all controllers (paths) available. > > [EMAIL PROTECTED] said: > > That option only works for FC-attached devices, as detailed in the > > cfgadm_fp(1M) manpage. > > > Sorry, I misremembered. For mpt you don't need the "-o" option: ... > There's only one path to a 2530 active in the example above, but it > does show all 3 LUN's which are mapped to the host/initiator. I > believe this is done via the cfgadm_scsi module. The other thing you need to remember is that when MPxIO is *enabled* for mpt-attached devices, then none of those devices show up in cfgadm output. (It is my group which delivered mpxio for mpt). James C. McPherson -- Senior Kernel Software Engineer, Solaris Sun Microsystems http://blogs.sun.com/jmcp http://www.jmcp.homeunix.com/blog _______________________________________________ storage-discuss mailing list storage-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/storage-discuss