On Wed, 16 Feb 2005, Osland, CD (Chris) wrote: > We found a similar problem, but then found that the incoming > video was attached to a randomly chosen 'outgoing' vic; between > all the vic's that were started, we could pick up
Chris, what do you mean by *pick up*? thanks, Monika all incoming > and outgoing streams. If I've got this wrong, Nick Hill should > be able to correct me. > > Inelegant, but it works! > > Cheers > > Chris > > ____________________________________________________________________ > Chris Osland Office tel: +44 (0) 1235 446565 > Digital Media and Access Grid Medialab tel: +44 (0) 1235 446459 > BIT Department Access Grid room tel: +44 (0) 1235 445666 > e-mail: [email protected] Fax: +44 (0) 1235 445597 > > CCLRC Rutherford Appleton Laboratory (Bldg. R18) > Chilton, DIDCOT, Oxon OX11 0QX, UK > > [The contents of this email are confidential and are for the use of > the intended recipient only. If you are not the intended recipient > do not take any action on it or show it to anyone else, > but return this email to the sender and delete your copy of it.] > > > > > > > -----Original Message----- > > From: [email protected] [mailto:[email protected]]On > > Behalf Of Monika Rabarison > > Sent: 16 February 2005 15:22 > > To: [email protected] > > Subject: [AG-TECH] "waiting for video" with unicast > > > > > > > > Hi All, > > > > Could someone help with the following issue? > > > > Multicast is working fine. The problem is when switching to > > unicast using > > any bridge. I have tested with a Room Node and a Personal Node (XP). > > No problem with rat. On the Room Node, vic is "waiting for > > video" on the Display machine (XP) and shows only the local video > > streams on the Video Capture machine(FC2). On the Personal > > Node, vic shows > > only the local video stream. No video transmission or > > reception between > > the Room Node and the Personal Node. > > When I run vic manually, I'm having the same problem. > > > > A remote site using unicast confirmed receiving audio and video > > from us though. > > > > You may wonder why I need to switch to unicast if multicast > > is working. > > We have sessions with a site that has to use unicast due to multicast > > issues. For some reason, when I use multicast,the audio from > > that site is > > breaking out. > > > > Any help would be most appreciated. > > > > Monika > > > > > > > > > > > > > > >
