We found a similar problem, but then found that the incoming video was attached to a randomly chosen 'outgoing' vic; between all the vic's that were started, we could pick up all incoming and outgoing streams. If I've got this wrong, Nick Hill should be able to correct me.
Inelegant, but it works! Cheers Chris ____________________________________________________________________ Chris Osland Office tel: +44 (0) 1235 446565 Digital Media and Access Grid Medialab tel: +44 (0) 1235 446459 BIT Department Access Grid room tel: +44 (0) 1235 445666 e-mail: [email protected] Fax: +44 (0) 1235 445597 CCLRC Rutherford Appleton Laboratory (Bldg. R18) Chilton, DIDCOT, Oxon OX11 0QX, UK [The contents of this email are confidential and are for the use of the intended recipient only. If you are not the intended recipient do not take any action on it or show it to anyone else, but return this email to the sender and delete your copy of it.] > -----Original Message----- > From: [email protected] [mailto:[email protected]]On > Behalf Of Monika Rabarison > Sent: 16 February 2005 15:22 > To: [email protected] > Subject: [AG-TECH] "waiting for video" with unicast > > > > Hi All, > > Could someone help with the following issue? > > Multicast is working fine. The problem is when switching to > unicast using > any bridge. I have tested with a Room Node and a Personal Node (XP). > No problem with rat. On the Room Node, vic is "waiting for > video" on the Display machine (XP) and shows only the local video > streams on the Video Capture machine(FC2). On the Personal > Node, vic shows > only the local video stream. No video transmission or > reception between > the Room Node and the Personal Node. > When I run vic manually, I'm having the same problem. > > A remote site using unicast confirmed receiving audio and video > from us though. > > You may wonder why I need to switch to unicast if multicast > is working. > We have sessions with a site that has to use unicast due to multicast > issues. For some reason, when I use multicast,the audio from > that site is > breaking out. > > Any help would be most appreciated. > > Monika > > > > > > >
