the mtowP is lagged to alot of walls around here, just the half with the piece of pipe welded to it.
On Fri, Feb 22, 2019 at 4:10 PM Cameron Crum <cc...@murcevilo.com> wrote: > Yeah...it's at a university so needs to look "professional". > > On Fri, Feb 22, 2019 at 4:00 PM Adam Moffett <dmmoff...@gmail.com> wrote: > >> Does the nanostation still have slots for hose-clamps? >> >> slip a 4" length of galvanized pipe strap through the slot and screw that >> to the wall. It will never get closer to the wall than that. >> >> >> On 2/22/2019 4:54 PM, Cameron Crum wrote: >> >> I think that still sicks out a little too far. I need something like 2-3 >> inches from the wall. >> >> On Fri, Feb 22, 2019 at 3:52 PM <ch...@wbmfg.com> wrote: >> >>> Some folks use these: >>> https://www.mccowntech.com/product/horizontal-member-tower-mount-6-inch/ >>> >>> I guess we could spin one without the bolts and back clamp. Disk only. >>> >>> *From:* Cameron Crum >>> *Sent:* Friday, February 22, 2019 2:33 PM >>> *To:* AnimalFarm Microwave Users Group >>> *Subject:* [AFMUG] mtow suitable? >>> >>> I'm looking for something like the mtow but for wall mounting a cpe. It >>> needs to be pretty low profile as it is in a breeze way and they want it as >>> close to the wall as possible and invisible as possible. It will be use to >>> mount a Nanostation AC. Chuck, do you have a low profile one or is there >>> something else suitable? >>> >>> Cameron >>> >>> ------------------------------ >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
