Thanks guys. It probably can't be completely flat, as it has to talk to a building about 1500 ft away slightly off axis so the zirkel looks like a good option. I'll reach out.
On Fri, Feb 22, 2019 at 10:49 PM Sean Heskett <af...@zirkel.us> wrote: > Yup we still sell the “Zirkel mounts” and a...@zirkel.us is the best > contact for orders. > > -Sean > > > On Fri, Feb 22, 2019 at 3:44 PM Ken Hohhof <af...@kwisp.com> wrote: > >> If it’s literally just a Nanostation AC (we use the Locos which are even >> smaller), we typically use what we call a “Zirkel mount” because it comes >> from Zirkel Wireless. Not sure if a...@zirkel.us is still the right >> contact. I think they were around $15 each in 50 qty so not super cheap, >> but the installers like that you can mount them various ways on siding, >> fascia, etc. and adjust azimuth and elevation to aim it. >> >> >> >> We also put 450b mid-gain SMs on them, but anything bigger like a Stinger >> or a CLIP may have too much windload and eventually break the plastic mount. >> >> >> >> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Steve Jones >> *Sent:* Friday, February 22, 2019 4:17 PM >> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >> *Subject:* Re: [AFMUG] mtow suitable? >> >> >> >> the mtowP is lagged to alot of walls around here, just the half with the >> piece of pipe welded to it. >> >> >> >> On Fri, Feb 22, 2019 at 4:10 PM Cameron Crum <cc...@murcevilo.com> wrote: >> >> Yeah...it's at a university so needs to look "professional". >> >> >> >> On Fri, Feb 22, 2019 at 4:00 PM Adam Moffett <dmmoff...@gmail.com> wrote: >> >> Does the nanostation still have slots for hose-clamps? >> >> slip a 4" length of galvanized pipe strap through the slot and screw that >> to the wall. It will never get closer to the wall than that. >> >> On 2/22/2019 4:54 PM, Cameron Crum wrote: >> >> I think that still sicks out a little too far. I need something like 2-3 >> inches from the wall. >> >> >> >> On Fri, Feb 22, 2019 at 3:52 PM <ch...@wbmfg.com> wrote: >> >> Some folks use these: >> >> https://www.mccowntech.com/product/horizontal-member-tower-mount-6-inch/ >> >> >> >> I guess we could spin one without the bolts and back clamp. Disk only. >> >> >> >> *From:* Cameron Crum >> >> *Sent:* Friday, February 22, 2019 2:33 PM >> >> *To:* AnimalFarm Microwave Users Group >> >> *Subject:* [AFMUG] mtow suitable? >> >> >> >> I'm looking for something like the mtow but for wall mounting a cpe. It >> needs to be pretty low profile as it is in a breeze way and they want it as >> close to the wall as possible and invisible as possible. It will be use to >> mount a Nanostation AC. Chuck, do you have a low profile one or is there >> something else suitable? >> >> >> >> Cameron >> ------------------------------ >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> >> >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com