This is usually done using wave guides rather than at the electrical level due
to the high losses that occur when trying to do it using transmission lines.
It’s a pretty complex piece of waveguide design - not something you can cobble
together. The vendors with full product lines in the microwave backhaul
market have these solutions already designed and available.
Mark
> On Jan 18, 2020, at 4:20 PM, Bill Prince <part15...@gmail.com> wrote:
>
> That would be a tall order. AF11 radios are two-pole already, and the
> diplexers have a N connector. if you had the right frequencies; maybe, but it
> is difficult for me to visualize.
>
> bp
> <part15sbs{at}gmail{dot}com>
>
> On 1/18/2020 12:23 PM, Matt Hoppes wrote:
>> Does anyone know of a 10-12ghz combiner module?
>>
>> Example - I want to run two airFiber 11x radios on one dish.
>>
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
