Is this ePMP or 450?  I wonder if you could enable POE out on the AUX port of a 
450i SM to run a second SM?  Multiple problems, like 450i SM needs 48V, plus 
Cambium never talks about using the AUX port for another SM but rather for 
things like cameras.  I’m not sure if the AUX port POE out is 48 or 24 volts.  
Plus the 450i SM is hideously expensive.

 

 

From: AF <af-boun...@af.afmug.com> On Behalf Of Carl Peterson
Sent: Tuesday, January 28, 2020 11:45 AM
To: AnimalFarm Microwave Users Group <af@af.afmug.com>
Subject: Re: [AFMUG] Cambium POE Splitter

 

I've never done it, but UBNT has some gigabit 24V A+B POE injectors for 
AirFiber.  You should just be able to split it out on both sides so A POE 
powers one and B POE powers the other.  If the topside devices cant take power 
on the data pins, you would need to pick the power off with gigabit power taps 
and put it back onto the power pins.  Much (1000X) easier to just use a Netonxi 
6 min in one of their little plastic od enclosures.  

 

On Tue, Jan 28, 2020 at 11:32 AM Mathew Howard <mhoward...@gmail.com 
<mailto:mhoward...@gmail.com> > wrote:

There are ways you could do power on two pairs... might not be very pretty, but 
it can certainly be done.

It's hard to say what would be the best way to do it, without knowing exactly 
what we're trying to accomplish.

 

 

On Tue, Jan 28, 2020 at 10:30 AM Jason McKemie 
<j.mcke...@veloxinetbroadband.com <mailto:j.mcke...@veloxinetbroadband.com> > 
wrote:

You can do fast Ethernet with 2 pair, I'm not aware of a way to send power up 
there as well, however.

On Tuesday, January 28, 2020, Matt <matt.mailingli...@gmail.com 
<mailto:matt.mailingli...@gmail.com> > wrote:

I have a case where I need to power up two separate Cambium 24 volt
SMs on rooftop but only need 100base to each.  Its very difficult to
run the second wire at this location which I need.  Anyone know of way
to split the cat5 at bottom and top to do this?  Not likely but
thought I would ask.

-- 
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com> 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com> 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com> 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com




 

-- 

Carl Peterson

PORT NETWORKS

401 E Pratt St, Ste 2553

Baltimore, MD 21202

(410) 637-3707 

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to