yes. As long as the SM can hear (and is set to listen to the frequency, bandwidth, and color code) it will work.
Mark > On Jan 30, 2020, at 2:49 PM, Josh Luthman <j...@imaginenetworksllc.com> wrote: > > Will the SM scan for CBRS and NN mode with one driver loaded? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Thu, Jan 30, 2020 at 2:48 PM Mark Radabaugh <m...@amplex.net > <mailto:m...@amplex.net>> wrote: > One very nice feature of the Cambium solution is (with some caveats) you can > just turn off CBRS mode in the AP and all the SM’s go back to normal NN > licensed operation. > > The caveats: You have to have the frequencies, channel widths, color codes, > etc. enabled in the SM’s for them to be able to ’see’ the AP when it comes up > in legacy NN modes. Obviously the frequencies need to be in 3650-3700 and > with appropriate power levels set. I’m told you may need to toggle the AP > in/out of CBRS and extra time in cnMaestro but that appears to be something > we have only seen a few times so far when transitioning in/out of CBRS modes. > > Mark > >> On Jan 30, 2020, at 2:21 PM, Ken Hohhof <af...@kwisp.com >> <mailto:af...@kwisp.com>> wrote: >> >> I see there’s a beta 4 release today. Haven’t read the release notes yet. >> >> From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com>> On >> Behalf Of Sean Heskett >> Sent: Thursday, January 30, 2020 12:24 PM >> To: AnimalFarm Microwave Users Group <af@af.afmug.com >> <mailto:af@af.afmug.com>> >> Subject: Re: [AFMUG] CBRS SAS options from Cambium >> >> We also found a big with one Medusa AP that wouldn’t get sync even tho the >> sync status showed cambium sync and timing port sync. Solution was to turn >> on ‘auto-sync + free-run’ and then also enable ‘free run before gps sync’ >> still working with cambium on a better fix but it’s working for now. >> >> On Thu, Jan 30, 2020 at 10:54 AM Mark Radabaugh <m...@amplex.net >> <mailto:m...@amplex.net>> wrote: >>> It has bugs, that’s for sure - but it’s workable. >>> >>> Turn off ‘spectrum scan on startup’ if you enable CBSD. It goes into an >>> endless loop in this beta. That’s probably the worst bug we have found. >>> >>> Mark >>> >>> Mark Radabaugh >>> Amplex >>> 22690 Pemberville Rd >>> <https://www.google.com/maps/search/22690+Pemberville+Rd+Luckey,+OH+43443?entry=gmail&source=g> >>> Luckey, OH 43443 >>> <https://www.google.com/maps/search/22690+Pemberville+Rd+Luckey,+OH+43443?entry=gmail&source=g> >>> 419-261-5996 >>> >>> >>>> On Jan 30, 2020, at 12:15 PM, Ken Hohhof <af...@kwisp.com >>>> <mailto:af...@kwisp.com>> wrote: >>>> >>>> >>>> Mark, how worried are you about the 450 firmware still being beta? >>>> >>>> From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com>> On >>>> Behalf Of Mark Radabaugh >>>> Sent: Thursday, January 30, 2020 10:35 AM >>>> To: AnimalFarm Microwave Users Group <af@af.afmug.com >>>> <mailto:af@af.afmug.com>> >>>> Subject: Re: [AFMUG] CBRS SAS options from Cambium >>>> >>>> We have it up and running happily. Just converted this site today: >>>> >>>> <image001.png> >>> >>>> >>>> You can pick the SAS you want to use with cnMaestro but the default option >>>> is Federated, but they will let you work with the other SAS vendors if you >>>> prefer. You have to use cnMaestro (either on or off premise) to serve as >>>> the proxy to communicate with the SAS - that’s just part of how the system >>>> works. >>>> >>>> If Cambium support isn’t working with you on it contact your regional >>>> Cambium sales manager. If that doesn’t work it’s not too hard to find >>>> your way up the Cambium organization until you get results. >>>> https://www.cambiumnetworks.com/our-company/executive-team/ >>>> <https://www.cambiumnetworks.com/our-company/executive-team/> is the list. >>>> Cambium follows the first.l...@cambiumnetworks.com >>>> <mailto:first.l...@cambiumnetworks.com>format for email addresses. Start >>>> with the CSM and escalate as needed. >>>> >>>> Mark >>>> >>>> >>>> >>>> >>>>> On Jan 30, 2020, at 11:25 AM, David Coudron <david.coud...@advantenon.com >>>>> <mailto:david.coud...@advantenon.com>> wrote: >>>>> >>>>> Interested to know what folks are doing or planning to do who have >>>>> Cambium PMP 450 3.65 equipment in the field. It is our understanding >>>>> that Cambium is the only SAS option we have due to the need to have >>>>> cnMaestro be the Domain Proxy for the SAS. Has anyone got this up and >>>>> working? We have been requesting access to the CBRS options in >>>>> cnMaestro for two weeks but are not making much progress. With full >>>>> commercial availability, we are a little surprised that this isn’t >>>>> available. Are there other options for connecting to a SAS other than >>>>> using Cambium as the SAS Domain Proxy? Seems they might not be ready >>>>> for this, or are not heavily committed to it. >>>>> >>>>> Regards, >>>>> >>>>> David Coudron >>>>> -- >>>>> AF mailing list >>>>> AF@af.afmug.com <mailto:AF@af.afmug.com> >>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>> <http://af.afmug.com/mailman/listinfo/af_af.afmug.com> >>>> >>>> -- >>>> AF mailing list >>>> AF@af.afmug.com <mailto:AF@af.afmug.com> >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> <http://af.afmug.com/mailman/listinfo/af_af.afmug.com> >>> -- >>> AF mailing list >>> AF@af.afmug.com <mailto:AF@af.afmug.com> >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> <http://af.afmug.com/mailman/listinfo/af_af.afmug.com>-- >> AF mailing list >> AF@af.afmug.com <mailto:AF@af.afmug.com> >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> <http://af.afmug.com/mailman/listinfo/af_af.afmug.com> > -- > AF mailing list > AF@af.afmug.com <mailto:AF@af.afmug.com> > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > <http://af.afmug.com/mailman/listinfo/af_af.afmug.com> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com