tell cambium matt to do another CBRS session get pitchforks and torches and go to his office
Im telling you guys, its good stuff On Thu, Jan 30, 2020 at 2:24 PM Mark Radabaugh <m...@amplex.net> wrote: > yes. As long as the SM can hear (and is set to listen to the frequency, > bandwidth, and color code) it will work. > > Mark > > On Jan 30, 2020, at 2:49 PM, Josh Luthman <j...@imaginenetworksllc.com> > wrote: > > Will the SM scan for CBRS and NN mode with one driver loaded? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Thu, Jan 30, 2020 at 2:48 PM Mark Radabaugh <m...@amplex.net> wrote: > >> One very nice feature of the Cambium solution is (with some caveats) you >> can just turn off CBRS mode in the AP and all the SM’s go back to normal NN >> licensed operation. >> >> The caveats: You have to have the frequencies, channel widths, color >> codes, etc. enabled in the SM’s for them to be able to ’see’ the AP when it >> comes up in legacy NN modes. Obviously the frequencies need to be in >> 3650-3700 and with appropriate power levels set. I’m told you may need to >> toggle the AP in/out of CBRS and extra time in cnMaestro but that appears >> to be something we have only seen a few times so far when transitioning >> in/out of CBRS modes. >> >> Mark >> >> On Jan 30, 2020, at 2:21 PM, Ken Hohhof <af...@kwisp.com> wrote: >> >> I see there’s a beta 4 release today. Haven’t read the release notes yet. >> >> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Sean Heskett >> *Sent:* Thursday, January 30, 2020 12:24 PM >> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >> *Subject:* Re: [AFMUG] CBRS SAS options from Cambium >> >> We also found a big with one Medusa AP that wouldn’t get sync even tho >> the sync status showed cambium sync and timing port sync. Solution was to >> turn on ‘auto-sync + free-run’ and then also enable ‘free run before gps >> sync’ still working with cambium on a better fix but it’s working for now. >> >> On Thu, Jan 30, 2020 at 10:54 AM Mark Radabaugh <m...@amplex.net> wrote: >> >> It has bugs, that’s for sure - but it’s workable. >> >> >> Turn off ‘spectrum scan on startup’ if you enable CBSD. It goes into an >> endless loop in this beta. That’s probably the worst bug we have found. >> >> Mark >> Mark Radabaugh >> Amplex >> 22690 Pemberville Rd >> <https://www.google.com/maps/search/22690+Pemberville+Rd+Luckey,+OH+43443?entry=gmail&source=g> >> Luckey, OH 43443 >> <https://www.google.com/maps/search/22690+Pemberville+Rd+Luckey,+OH+43443?entry=gmail&source=g> >> 419-261-5996 >> >> >> On Jan 30, 2020, at 12:15 PM, Ken Hohhof <af...@kwisp.com> wrote: >> >> >> Mark, how worried are you about the 450 firmware still being beta? >> >> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Mark Radabaugh >> *Sent:* Thursday, January 30, 2020 10:35 AM >> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >> *Subject:* Re: [AFMUG] CBRS SAS options from Cambium >> >> We have it up and running happily. Just converted this site today: >> >> <image001.png> >> >> >> You can pick the SAS you want to use with cnMaestro but the default >> option is Federated, but they will let you work with the other SAS vendors >> if you prefer. You have to use cnMaestro (either on or off premise) to >> serve as the proxy to communicate with the SAS - that’s just part of how >> the system works. >> >> If Cambium support isn’t working with you on it contact your regional >> Cambium sales manager. If that doesn’t work it’s not too hard to find >> your way up the Cambium organization until you get results. >> https://www.cambiumnetworks.com/our-company/executive-team/ is the list. >> Cambium follows the first.last@cambiumnetworks.comformat for email >> addresses. Start with the CSM and escalate as needed. >> >> Mark >> >> >> >> >> >> On Jan 30, 2020, at 11:25 AM, David Coudron <david.coud...@advantenon.com> >> wrote: >> >> Interested to know what folks are doing or planning to do who have >> Cambium PMP 450 3.65 equipment in the field. It is our understanding that >> Cambium is the only SAS option we have due to the need to have cnMaestro be >> the Domain Proxy for the SAS. Has anyone got this up and working? We >> have been requesting access to the CBRS options in cnMaestro for two weeks >> but are not making much progress. With full commercial availability, we >> are a little surprised that this isn’t available. Are there other options >> for connecting to a SAS other than using Cambium as the SAS Domain Proxy? >> Seems they might not be ready for this, or are not heavily committed to it. >> >> Regards, >> >> David Coudron >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
