@James that stuff is a complete joke, we tried it for a few posts at customer sites and it was entirely a waste of time
Josh Luthman 24/7 Help Desk: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Jun 17, 2021 at 11:35 AM James Howard <ja...@litewire.net> wrote: > What about using something like this? > > > > > https://www.menards.com/main/building-materials/concrete-cement-masonry/bagged-concrete-cement-mortar/fast-2k-trade-quick-foam-post-anchor-2-9-lb/1894030/p-1526970580634-c-5648.htm?tid=1606715208629456470&ipos=1 > > > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of * Chuck McCown via AF > *Sent:* Thursday, June 17, 2021 9:31 AM > *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> > *Cc:* Chuck McCown <ch...@go-mtc.com> > *Subject:* Re: [AFMUG] Handhole / vault recommendation > > > > I would think carve it with a wire cutter. Polyurethane is pretty > expensive foam. > > > > *From:* Adam Moffett > > *Sent:* Thursday, June 17, 2021 4:04 AM > > *To:* af@af.afmug.com > > *Subject:* Re: [AFMUG] Handhole / vault recommendation > > > > So do you carve a handhole pocket out of a solid block, or mold the > styrofoam with a handhole pocket built in? > > I wonder if you could mold your own out of polyurethane foam. > > > https://www.fibreglast.com/product/2lb-Mix-And-Pour-Foam?gclid=Cj0KCQjw5auGBhDEARIsAFyNm9HWb1-WKMvpV4NJobUzWOFaDRUJVW8DnQHnezAOVTeMb29vpJGHUdsaAizlEALw_wcB > > > > On 6/16/2021 6:11 PM, Chuck McCown via AF wrote: > > Google direct buries most of their splice enclosures with a locate ball. > > > > I am thinking of making a large cube of styrofoam that has a pocket for > the splice case. > > Direct bury it all with a locate ball. Need back in, just cut the sod and > pull out the styrofoam. > > > > The strength of a block of styrofoam is in the same range of firm to stiff > soil. > > Lot less money than a handhole. You could use a hot blade and cut it up > to get it out if you needed the slack coil. > > > > *From:* Jason McKemie > > *Sent:* Wednesday, June 16, 2021 12:07 PM > > *To:* AnimalFarm Microwave Users Group > > *Subject:* [AFMUG] Handhole / vault recommendation > > > > I've been using the Carson / Oldcastle 2200-18 vaults with a 6" extension, > but everything is backordered 30+ weeks. Does anyone have any alternate > suggestions for a vault to hold a FOSC 450A splice closure? HDPE would > probably be preferable, but I could do a concrete polymer if necessary. > > > > Thanks. > ------------------------------ > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > ------------------------------ > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > ------------------------------ > > *Total Control Panel* > > Login <https://portal.reflexion.net/login?domain=litewire.net> > > To: ja...@litewire.net > <https://portal.reflexion.net/address-properties?aID=242260993&domain=litewire.net> > > From: af-boun...@af.afmug.com > > *You received this message because the domain afmug.com <http://afmug.com> > is on your allow list.* > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
