Might be an issue with the camera..unless they're ok with a super low frame
rate.

 

When I looked at licensing a channel the $/mhz/population made it 5 digits
even for a fairly rural county.  I suppose if you only need 125khz then it
might work out.

 

 

 

From: AF <af-boun...@af.afmug.com> On Behalf Of Scott Imhoff via AF
Sent: Tuesday, August 16, 2022 11:36 AM
To: AnimalFarm Microwave Users Group <af@af.afmug.com>
Cc: Scott Imhoff <scott.imh...@cambiumnetworks.com>
Subject: Re: [AFMUG] [ External ] Re: 900 MHz PtP

 

You might consider obtaining a license for 220 MHz or 450 MHz for the SCADA
application, you will have much better propagation in comparison to 900 MHz.

 

From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> > On
Behalf Of Mathew Howard
Sent: Tuesday, August 16, 2022 10:22 AM
To: AnimalFarm Microwave Users Group <af@af.afmug.com
<mailto:af@af.afmug.com> >
Subject: [ External ] Re: [AFMUG] 900 MHz PtP

 

You'd want PTP-450i, not PMP, which is going to be much cheaper (you'd still
be looking at over $1k for a link though). 

 

But yeah, that doesn't sound very promising... 900mhz isn't going to go
through rock.

 

You should be able to get an old PMP-100 AP and SM for next to nothing if
you really want to try it.

 

On Tue, Aug 16, 2022 at 9:57 AM Craig Baird <cr...@xpressweb.com
<mailto:cr...@xpressweb.com> > wrote:

I was afraid that would be the case. I guess I'll probably have to pitch the
450i to them. Although honestly, I'm not really all that certain 900 MHz
will even cut it. This is for the city water company. They have a well up a
canyon. About 1/4 mile down the road, they have a cistern. They have
Internet at the cistern and want to get it connected to the well because
they want to install some security cameras and a DVR at the well. Problem is
that there's a rock outcropping between the two sites. Back in my WISP days,
we did 900 MHz through trees. But I never tried it through rock. It was
finicky enough through trees, so I'm not sure I even want to try going
through a rock/hill. I figure there might be some reflection off the canyon
walls that might help, but for the cost of a 450i (especially the AP), I'm
not sure I want to gamble on it. That's why I was hoping for a cheap
solution. Maybe I'll try the eBay route and see what I can find.

 

Craig

 

 

On Tue, Aug 16, 2022 at 4:04 AM Adam Moffett <dmmoff...@gmail.com
<mailto:dmmoff...@gmail.com> > wrote:

I think the 450 is all you've got.

 

For me, nlos isn't worth pursuing anymore. The link degrades over years as
trees grow and there's nothing much you can do about it.  I would rather say
"no" and pursue something else with my time.   But If I had to do 900MHz I
think 450i is the only reasonable choice that I'm aware of.

 

You could hunt for old cards or old ubnt on eBay I guess.

 

Get Outlook for iOS
<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2F
o0ukef&data=05%7C01%7Cscott.imhoff%40cambiumnetworks.com%7Cb8e104a6fa0b4b1da
4fc08da7f9b4c54%7C0e263e36340946228ac818d993e76eb6%7C0%7C0%7C637962602224577
823%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1h
aWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=RWK0SS7SuFkR2rpQTkH0SuYtsUeOYvxSEkd
MRLkRBkU%3D&reserved=0> 

  _____  

From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> > on
behalf of Craig Baird <cr...@xpressweb.com <mailto:cr...@xpressweb.com> >
Sent: Tuesday, August 16, 2022 2:12:04 AM
To: AnimalFarm Microwave Users Group <af@af.afmug.com
<mailto:af@af.afmug.com> >
Subject: [AFMUG] 900 MHz PtP 

 

Is there a good source for an inexpensive, but reliable 900 MHz PtP,
solution these days? Looking for something for a client that needs a nLOS
link. All I can find is Cambium 450, which seems crazy expensive for what
I'm looking for. Back in my WISP days, I seem to recall you could throw
together a pretty cheap, reliable 900 MHz solution with Mikrotik, but it
seems those have gone the way of the dodo. Seems UBNT doesn't sell 900 MHz
stuff anymore either. Guessing the small band size probably made 900 MHz
impractical for delivering the speeds generally required these days. Can
anyone point me at anything? 

 

Craig

 

-- 
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com> 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
<https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Faf.afmug.c
om%2Fmailman%2Flistinfo%2Faf_af.afmug.com&data=05%7C01%7Cscott.imhoff%40camb
iumnetworks.com%7Cb8e104a6fa0b4b1da4fc08da7f9b4c54%7C0e263e36340946228ac818d
993e76eb6%7C0%7C0%7C637962602224577823%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wL
jAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=
Va%2BcT4olbI0lzAo%2BilM%2BxqKZkKByNsiA2ToxmPR46MQ%3D&reserved=0> 

-- 
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com> 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
<https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Faf.afmug.c
om%2Fmailman%2Flistinfo%2Faf_af.afmug.com&data=05%7C01%7Cscott.imhoff%40camb
iumnetworks.com%7Cb8e104a6fa0b4b1da4fc08da7f9b4c54%7C0e263e36340946228ac818d
993e76eb6%7C0%7C0%7C637962602224577823%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wL
jAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=
Va%2BcT4olbI0lzAo%2BilM%2BxqKZkKByNsiA2ToxmPR46MQ%3D&reserved=0> 

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to