$2.25 for plowing here, should be $1 if you ask me. On Thu, Dec 22, 2022 at 3:39 PM Chuck McCown via AF <af@af.afmug.com> wrote:
> I wish I could get that for plowing. Normally it is in the $4.50 range > assuming wide open range. I have seen it as low as $1.50. > > *From:* dmmoff...@gmail.com > *Sent:* Thursday, December 22, 2022 1:33 PM > *To:* 'AnimalFarm Microwave Users Group' > *Subject:* Re: [AFMUG] HDD per foot cost > > > The highest I saw was $50/ft. > > > > $6-8 sounds like plowing prices. I’d expect at least $15/ft for HDD. > Whoever’s doing it for $6-8/ft don’t lose that guy’s number. > > > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Jim Bouse [Brazos > WiFi] > *Sent:* Thursday, December 22, 2022 10:27 AM > *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> > *Subject:* Re: [AFMUG] HDD per foot cost > > > > That varies greatly. Somewhere between $6-8/ft here in central Texas > rural roads and rural subdivisions. Anywhere with more obstructions will > cost significantly more due to the effort to avoid other utilities. > > > > Jim Bouse > Owner - Brazos WiFi > 979-999-7000 > http://www.brazoswifi.com > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Carl Peterson > *Sent:* Thursday, December 22, 2022 9:24 AM > *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> > *Subject:* [AFMUG] HDD per foot cost > > > > > What is the going rate per foot for HDD drilling and pullback of two SDR11 > ducts and a trace wire? Very sandy soil in the FL panhandle. All > materials provided? Around 4-5K' split into three or four runs. > > > > -- > > Carl Peterson > > *PORT NETWORKS* > > 401 E Pratt St, Ste 2553 > > Baltimore, MD 21202 > > (410) 637-3707 > > ------------------------------ > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com